Cutting disc for WORX Landroid M500, M700, WR167E, WR141E and Vision M600
- Cutting disc for WORX Landroid M500, M700, WR167E, WR141E and Vision M600
- Two variants: 6 blades as a 1:1 replacement or 7 blades for a finer cutting pattern
- Compatible adapter included in the package – correct fit without additional parts
- Robust mowing disc with protection – free grass flow, fewer blockages
- Blades pre-assembled, quick swap in just a few minutes without tools
+
+
Compatibility – WORX
Fits the following robotic mowers:
- ✓ Landroid M500
- ✓ Landroid M700
- ✓ Landroid WR167E
- ✓ Landroid WR141E
- ✓ Vision M600
The Landroid M is one of the best-selling robotic lawnmowers in German gardens – and it drives right up to the edge of the lawn. That’s exactly where you notice first when the blades no longer cut properly. Here you will find the right replacement mowing disc for M500, M700, WR167E, WR141E and Vision M600: with 6 or 7 blades, pre-assembled and with the matching adapter in the scope of delivery.
6 or 7 blades – which disc fits your garden?
Both versions sit on the same mounting, both come with an adapter and protective frame, and both are delivered pre-equipped. The only difference is the number of cutting points per revolution – and thus how finely the cut material is chopped up.
The configuration you know from the Landroid. If the old mowing disc shows signs of wear, the blade mounting no longer works cleanly, or the cutting performance declines, simply replace it here with a fresh disc – and the lawn looks like it did in the first season again.
Seven blades distribute the cutting work across more points per revolution: Each blade of grass is hit more often, the cut pattern becomes finer, and the tips of the blades of grass stay more even. The choice for dense, vigorously growing lawn – especially after a few days of rain.
You notice it first at the lawn edge
The Landroid doesn’t just mow the surface; it also works close to flower beds, paths, and walls. These edge lanes are the most honest test for the cutting system: on the surface, small weaknesses blur over across multiple passes, but at the edge, every blade that isn’t cleanly separated simply stays standing.
When the blades become dull, the robotic lawnmower tears the grass rather than cutting it. The tips of the blades fray and turn brownish, the lawn looks uneven – and dull cutting discs also put extra strain on the motor because it has to work against the resistance.
A fresh mowing disc restores exactly what you bought the Landroid for: six or seven sharp blades separate the stems precisely instead of crushing them – a dense, even cut pattern right up to the last pass at the edge of the flower bed. The cutting disc is delivered fully equipped and is ready to use straight out of the packaging.
Adapter included in the scope of delivery instead of DIY
With robotic lawnmower replacement parts, it’s not only the diameter that matters, but above all the mounting: the attachment and design differ depending on the model. That’s why the matching adapter is already included with this cutting disc. It ensures the correct fit on the Landroid cutting system – you don’t have to buy anything extra and you don’t need to modify anything.
The replacement itself is done in just a few minutes and requires no tool hassle: switch off the robotic lawnmower and secure it against accidental start-up, carefully tilt it, remove the old disc, attach the new one – finished. While doing so, briefly compare the design with the previous component, and everything will fit correctly right away.
Both versions come as a robust mowing disc with protection. This keeps the grass flow clear: damp cuttings collect less around the blades and do not slow down rotation – fewer stops, less rework, and a quieter run even in denser growth.
A quick look at the mowing disc is always worth it when the Landroid hits a stone, a root, or a solid branch – if the blades no longer sit securely or if the disc shows notches, the replacement is done during a charging break.
Simply select the desired number of blades above – 6 or 7, if you wish also as a set with 60 replacement blades. Both variants fit WORX Landroid M500, M700, WR167E, WR141E and Vision M600, come with an adapter and are delivered ready to install.
Top reviews
After carefully checking compatibility with my WORX Landroid (M700), I ordered the 6-way cutting disc and it fits perfectly without any hassle—the adapter sits evenly, and the cutting edges look solid. After a week of operation, you can see a straight, clean cutting path, especially on a slightly uneven lawn. After testing two other brands that produced noticeably worse grass discharge, this replacement really makes a difference. The only thing I had to adjust was the schedule timing, because after the replacement the robot started mowing right away faster.
Works well on my WORX Landroid M700. It cuts neatly and the adapter fits snugly, but the packaging was a bit messy when it arrived.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Frequently asked questions
Does a disc really fit the M500, M700, WR167E, WR141E and Vision M600?
Yes, this cutting disc is intended for exactly these Landroid models and is supplied with the appropriate adapter. Since the mounting, fastening and adapter may differ for mowing robots depending on the model, please compare the model name of your device and the design of the existing mowing disc before ordering.
What do I need the included adapter for in the first place?
The adapter ensures that the cutting disc sits correctly on the Landroid’s cutting system. It is included in the package for both variants, so you don’t have to reorder or modify anything—an aspect that is often overlooked when buying spare parts and then causes frustration.
My lawn looks scruffy at the edges, but it’s fine in the middle—what’s the reason?
On the edge strips, every blade of grass that hasn’t been cleanly separated just stands there, while small weaknesses in the middle get blurred out over multiple passes. That’s why scruffy edges are usually the first visible sign that the blades tear the grass rather than cut it—replacing the mowing disc with a fresh one and sharp blades fixes it.
Do 7 blades really make a difference in a normal home garden?
The difference lies in the number of cutting points per revolution: seven blades distribute the cutting work more finely, so each blade of grass is hit more often. This is noticeable especially with dense, vigorously growing lawns—e.g., after a few days of rain. If you’re satisfied with the usual mowing pattern, the 6-fold version works just as well.
Do both versions have protection on the mowing disc?
Yes. Both the 6-fold and the 7-blade cutting disc come as a robust mowing disc with protection. It keeps the grass flow clear so that damp clippings don’t collect around the blades and slow down blade rotation.
Do I still need to screw blades onto the Landroid disc?
No. The blades are already pre-assembled—six for the 6-fold version and seven for the 7-blade version. You unpack the disc, attach it using the included adapter, and you can keep mowing; individual fastening is not required.
How does the swap on the Landroid work, and how long does it take?
It’s done in just a few minutes and doesn’t require any fiddling with tools: switch off the robot and secure it against accidental starting, carefully tip it over, remove the old disc, and attach the new one. A quick comparison with the previous component before installation doesn’t hurt—then everything fits correctly right away.
Is this an original WORX cutting disc?
No, this is a compatible replacement part from CUT GUARD. It is manufactured as a replacement mowing disc for the specified Landroid models and is supplied including the appropriate adapter. Please compare the model number and design of the existing mowing disc before purchasing to ensure correct use.