7-blade cutting disc for WORX Vision Cloud WR303E, WR304E, WR305E, WR306E & WR308E
- 7-blade cutting disc for WORX Vision Cloud WR303E, WR304E, WR305E, WR306E and WR308E
- Compatible replacement cutting disc for compatible WORX Vision Cloud robotic mowers
- Supports precise blade guidance and an even lawn cut
- Suitable as a blade disc, cutting disc or cutting plate for the robotic mower cutting system
- Ideal for maintenance, replacement, and preparing the robotic mower for the gardening season
incl. 7 blades
+
Compatibility – WORX
Fits the following robotic mowers:
- ✓ Vision Cloud WR303E
- ✓ Vision Cloud WR304E
- ✓ Vision Cloud WR305E
- ✓ Vision Cloud WR306E
- ✓ Vision Cloud WR308E
As soon as your WORX Vision Cloud no longer cuts cleanly through the grass, the 7-blade cutting disc for WR303E–WR308E restores speed and an even cut.
Frayed lawn even with a robotic mower? This is why
Dull blades tear the grass rather than cutting it—resulting in uneven cut edges and more rework. After many mowing hours, the first blades are simply worn out, and the tips of the blades look frayed. With the 7-blade cutting disc for WORX Vision Cloud WR303E, WR304E, WR305E, WR306E & WR308E, you’re relying on fresh cutting performance and bringing your Vision Cloud back into the right rhythm. Seven sharp blades ensure an even, clean cutting pattern.
Fits your WORX Vision Cloud WR303E, among others
The 7-blade cutting disc fits perfectly for WORX Vision Cloud WR303E, WR304E, WR305E, WR306E and WR308E. You can swap the cutting disc quickly without any long tool hassle—just replace it and keep mowing.
One set, one handle—done
The 7 blades provide a finer cutting pattern because the grass is captured and shredded more evenly. Many cutting edges mean many clean cuts per revolution—visible in the even, lush lawn. You get the cutting disc as a complete replacement—so the mowing disc is fully ready for use again. Even without any DIY experience, the swap takes just a few minutes.
More free grass flow instead of blockages
With sharp cutting edges, the cutting disc reduces typical grass blockages on the mowing disc. Otherwise, damp clippings and dense lawns collect around the blades and slow down rotation— a free-spinning mowing disc helps prevent this. This way, your WORX Vision Cloud runs more reliably, even when the grass is a bit thicker. Fewer stops, less rework, and a robotic mower that calmly completes its rounds.
Your benefits at a glance
Top reviews
J’ai remplacé la 7-Klingen-Messerscheibe sur mon WORX Vision Cloud WR306E. La pièce est bien compatible, les fixations tombent parfaitement, et après le changement le gazon est tondu net, sans zones irrégulières. Le seul point: l’alignement demande un petit contrôle avant de serrer.
Wymieniłem tę 7-klingową tarczę w moim WORX Vision Cloud WR304E i pasuje bez kombinowania – wszystkie otwory i mocowanie pod śruby zgadzają się z fabryczną częścią. Wymiana zajęła mi ok. 15–20 minut, a po uruchomieniu trawnik wygląda równo, bez poszarpanych fragmentów między przejazdami.
jag köpte 7-klingen-messerskivan till min worx vision cloud wr305e och den passade exakt, inga konstiga glapp när jag monterade fast den. gräset blev jämnare och det känns som att roboten klipper mer konsekvent efter bytet. 5/5 från mig!
den passer til min worx vision cloud wr305e, og den klipper pænt jævnt igen. dog kom den i en lidt slidt pakke, så jeg var nervøs for transportskader.
the blades are sharp and cut perfectly. ideal for spring!
Die Messerscheibe passt bei meinem WORX Vision Cloud WR304E, das Wechseln ging ohne große Fummelei. Der Schnitt ist ordentlich, aber die Delivery kam erst nach der angekündigten Zeit und die Verpackung wirkte etwas dürftig. Für den Preis okay.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I change the 7-blade cutting disc for my WORX WR303E?
Changing the cutting disc is done in a few steps. First, you will need a Phillips screwdriver to loosen the screws. Then remove the old cutting disc and place the new 7-blade cutting disc on. Reattach it with the screws and tighten them. The entire process should take no longer than 15 minutes.
Is the CUT GUARD 7-blade cutting disc compatible with my WORX WR305E?
Yes, the CUT GUARD 7-blade cutting disc is specifically designed for the WORX Vision Cloud models WR303E, WR304E, WR305E, WR306E, and WR308E. You can be sure that this cutting disc fits your model perfectly and provides optimal performance.
What materials are used for the CUT GUARD cutting disc and how long does it last?
The CUT GUARD 7-blade cutting disc is made of high-quality, durable steel that is resistant to rust and wear. With normal use and regular maintenance, you can expect a lifespan of up to 2 years before a replacement is needed.
What are the advantages of the CUT GUARD cutting disc compared to an original disc?
The CUT GUARD 7-blade cutting disc offers a cost-effective alternative to the original disc and impresses with precise blade guidance. While the original disc is often more expensive, the CUT GUARD provides similar or even better cutting quality, making the investment often worthwhile.
What happens if I use an incompatible cutting disc on my WORX WR306E?
Using an incompatible cutting disc can lead to imbalances, negatively affecting the performance of your lawn mower robot. This can not only result in an uneven cutting pattern but can also cause damage to the lawn mower robot itself, which may lead to costly repairs.