Cutting disc for MOVA 600 and MOVA 1000 robotic lawnmowers
- Cutting disc for MOVA 600 and MOVA 1000 robotic lawnmowers – a spare part for both models
- Choose between 6, 7 or 9 blades – from the proven standard to the finest cutting pattern
- Protection included with every variant – smoother operation, fewer grass blockages
- Blades pre-assembled, tool-free replacement – ideal even for the first disc change
- Optional as a set with 60 replacement blades – stock up for upcoming changes, cheaper than buying individually
+
+
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ MOVA 600
- ✓ MOVA 1000
The MOVA 600 or MOVA 1000 is for many the first robotic lawnmower in the garden – and at some point the first small service is due. No worries: The cutting disc is a completely normal wear part, and here you will find the right replacement with 6, 7 or 9 blades, ready assembled and with blade guard.
How many blades should it be? A quick decision guide
All three versions fit equally on MOVA 600 and MOVA 1000 and are supplied with a protective frame. They differ only in how many blades pass through the grass with each rotation – and thus in how fine the cut pattern turns out.
The obvious choice for your first replacement: You replace the worn disc with a fresh one with six blades and your MOVA cuts again just like it did in the early days. Nothing to get used to, nothing to adjust.
With seven blades, every blade of grass is captured more often at the same speed. The result looks more even, especially when the lawn is growing quickly – a small upgrade compared to the usual standard, without changing anything about handling.
Nine blades cut the clippings into the finest pieces – the tips look like they’ve been polished, and the tiny scraps disappear unobtrusively in the lawn. For everyone who wants to get the maximum in care appearance from their first robotic lawnmower.
What wears out on the robotic lawnmower – and why that is completely normal
When the first robotic lawnmower comes in, hardly anyone thinks about replacement parts – the device just keeps running. But just like tires on a car, with the MOVA 600 and MOVA 1000 there is exactly one component that wears down as intended: the blade plate with its blades. It spins a thousand times through the grass on every single drive.
So the fact that blades become dull over time and the cutting disc shows signs of use is neither a defect nor a reason to make a complaint with the robotic lawnmower – it is normal wear that affects every mowing disc. The only thing that matters is noticing it in time: frayed grass with worn tips is the typical first sign.
The replacement is intentionally kept simple: This cutting disc comes to you completely assembled with pre-mounted blades and an attached protective frame. You don’t have to screw individual blades into place or do anything else – the disc is prepared so that the swap works even the very first time.
Once per season, take a quick look at the mowing disc and replace it if needed – that’s all the routine required to keep your MOVA mowing just like it did at the beginning.
Your first disc change: easier than you think
If you’ve never replaced a part on a robotic lawnmower before: That’s exactly what this replacement is made for. Switch the robot off, carefully lay it on its side, remove the old cutting disc, fit the new one – you don’t need any tools for this, and after just a few minutes your MOVA will be mowing again as if nothing happened.
The included protective frame is part of every version, whether it has 6, 7 or 9 blades. It keeps the freely moving blades in a controlled position and ensures that the mowing disc continues running smoothly even in dense or damp grass, instead of getting clogged with cuttings.
A practical tip for beginners: Take the blade change as an opportunity to clear the cutting area of grass residue and soil once. This way you can immediately see whether the disc has been bumped somewhere – for example after contact with a branch or a stone – and start fresh in the next section of the season.
And if you’re unsure whether the disc fits: you only need the model designation MOVA 600 or MOVA 1000 – both use the same version; comparing dimensions or images is unnecessary.
Simply select your number of blades above – 6 for the proven standard, 7 or 9 for a finer cut pattern; if you want, you can get it right away with 60 replacement blades in the set. Each version is delivered ready to install and turns the first service on your MOVA into a matter of minutes.
Top reviews
Good quality and fits my Mova 600 without any problems; the blade guard protects well during replacement. Only downside: the installation instructions are very brief—you have to figure out the order for a moment.
This cutting disc fits perfectly on my Mova 1000. With the protective cover, the cutting area stays cleaner and the grass doesn’t get caught up as quickly after mowing. One downside: the mounting steps are a bit tricky to position without looking around first.
The blade for my Mova 600 was exactly what I needed! My lawn is over 500 square meters, and the old blades were just not effective anymore. With the new blades, it mows more evenly and no longer leaves clumps of grass. The blade guard is great, making handling much safer. A small downside was the somewhat long delivery time, but the wait was definitely worth it!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Frequently asked questions
My MOVA is my first robotic lawnmower— is it normal that the cutting disc already shows wear?
Yes, that’s completely normal and not a defect. The cutting disc is the wear part of the robotic lawnmower—comparable to tires on a car: it rotates through the grass countless times during every drive, the blades become dull, and the disc shows signs of use. Replacing it is part of the usual care for MOVA 600 and MOVA 1000.
Does this cutting disc fit both the MOVA 600 and the MOVA 1000?
Yes. Both models use the same mounting for the mowing disc, so each of the three blade variants fits MOVA 600 and MOVA 1000 without any adjustments. You don’t need to measure anything—the model name of your robot is enough.
Which variant is right for the first replacement—6, 7, or 9 blades?
If you were satisfied with the previous cutting pattern, the 6-blade variant is the straightforward standard replacement. With 7 blades, each blade of grass is captured more often per rotation, and the result is finer; 9 blades provide the finest cutting pattern in the series. Assembly and handling are identical for all three.
I’ve never changed something like this before—how difficult is the replacement really?
The replacement is intentionally beginner-friendly: switch the robot off, carefully tilt it, remove the old disc, and attach the new one—without any tools. Since the blades are delivered pre-assembled, you don’t have to screw anything in individually. Even the very first time, you’ll be ready to mow again after just a few minutes.
Is the guard included with every blade variant?
Yes, the guard is included with all three versions – 6, 7 and 9 blades – as part of the delivery. It keeps the pivot-mounted blades securely in position, supports a smooth run of the mowing disc, and helps prevent grass blockages in damp or dense grass.
How often should I check the cutting disc as a beginner?
As a simple routine, one look per season is enough, plus a check after special events such as contact with branches, stones, or fallen fruit. Signs that a replacement is due include frayed blade tips, brownish cut edges, an unkempt-looking lawn despite regular mowing, or blades that sit loosely.
Is the set with 60 replacement blades worth it already with the first purchase?
If you mow regularly with your MOVA, yes: you simply swap out dull blades from your supply without having to reorder, and in the set the replenishment costs less than buying later as individual items. This way, you turn your first service into a predictable routine for the coming seasons.
Is this an original MOVA spare part?
No, it is a compatible cutting disc from CUT GUARD. It is manufactured to fit the mounting for MOVA 600 and MOVA 1000, comes with a guard and pre-assembled blades, and is designed for regular use in a robotic mower. Please check the model designation of your device before purchasing.