Cutting Disc for MOVA VIAX 250, 300 & 500 Robotic Lawnmowers – Mowing Disc with Protection and 6 Blades Against Grass Blockages
- Blade disc for MOVA VIAX 250, 300, and 500 robotic mowers with protection and 6 blades
- Helps reduce grass blockages at the cutting deck and supports a free operation of the cutting system
- Suitable as a replacement blade disc, cutting disc, or mower cutting deck for compatible MOVA VIAX models
- Ideal for maintenance, replacement, and reliable cutting performance during regular use
- Durable and safe solution for a clean lawn cut during the gardening season
incl. 6 blades
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ VIAX 250
- ✓ VIAX 300
- ✓ VIAX 500
If your MOVA VIAX 250, 300, or 500 suddenly cuts more sluggishly, this cutting disc with 6 blades is the quick way back to a clean cut—without tinkering.
Why the lawn suddenly looks unkempt
Dull blades tear the grass rather than cutting it: The lawn looks uneven and the mower takes longer. Over time, this also puts extra strain on the motor, because it has to work against the resistance. With the right cutting disc for MOVA VIAX 250, 300 & 500, you get the cutting performance back up to speed and stop the “pulling” in the grass. Six sharp blades ensure an even cutting pattern and a dense, well-groomed lawn.
Fits perfectly for your MOVA VIAX 250 and more
The cutting disc fits perfectly for MOVA VIAX 250, VIAX 300, and VIAX 500. You can swap the mowing disc easily—usually you don’t need any tools, and the replacement is done in just a few minutes.
Ready to use in just a few minutes
Six blades ensure a more even cutting pattern and more power when mowing. Sharp blades cut through the stems precisely instead of crushing them—something you can even see up close on the lawn. The package includes the cutting disc / mowing disc including guard—so the swap is ready to use right away. The guard keeps the blades securely in position and ensures reliable operation. Unpack, attach, done—no tools required.
No more getting stuck in dense grass
The guard on the cutting disc helps reduce grass build-up around the mowing disc—so there are fewer blockages. Otherwise, damp clippings like to collect around the blades and slow down rotation; a free-spinning mowing disc keeps the grass moving. Result: your MOVA VIAX runs more reliably, even when the grass is a bit thicker. Fewer stops, less rework, and a robotic mower that calmly completes its rounds.
That’s why switching is worth it
Top reviews
Jag köpte en ny messerscheibe till min MOVA VIAX 300 efter att gräset börjat klumpa sig lite vid hårdare partier, och den verkar faktiskt hjälpa. Med de sex klingorna och skyddet går allt mer jämnt utan lika många stopp, även i mitt lite större grannskåp på runt 600 kvm. Själva bytet var smidigt och passformen sitter bra. Däremot kom den i en ganska tunn kartong, så emballaget kändes lite i minsta laget när man får den hem i brevlådeläge.
Bought this for my MOVA VIAX 250 after the old blades started clogging in thicker patches. The disc came with the expected 6 cutting blades and installed in about 10 minutes, lining up with the existing screws without fuss; it immediately runs smoother with fewer grass blockages.
After trying two other brands, I am extremely satisfied with this disc for the MOVA VIAX. The six blades are effective in preventing grass blockages, allowing the mower to operate without interruption. Easy installation and apparent robustness, even after a few weeks of use. I haven't had any performance issues so far.
Jeg købte messerskiven til min MOVA VIAX 300, efter at græsset begyndte at klistre sig på skæreudstyret i de lidt tykkere områder. Efter trying two other brands endte jeg her, og den medfølgende beskyttelse og de seks klinger gjorde en tydelig forskel: færre græsblokader og en mere jævn kørsel. Den passede også uden problemer, og jeg kunne montere den hurtigt uden at justere noget. Christian
Schnell angekommen und die Messerscheibe passt exakt für meinen MOVA VIAX 500. Die sechs Klingen mit Schutz reduzieren Grasblockaden spürbar, seit dem Wechsel läuft alles runder.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What happens if I use the wrong blade disc for my MOVA VIAX 250 or 300?
A wrong or incompatible blade disc can lead to imbalance and vibrations, which can not only damage the lawn mower robot but also negatively affect the cutting quality. Additionally, you risk blades breaking or the motor being overloaded, which can lead to expensive repairs.
What are the advantages of the CUT GUARD blade disc compared to original parts for MOVA VIAX 500?
The CUT GUARD blade disc offers a cost-effective alternative to original parts and is specifically designed for the MOVA VIAX 500. It impresses with its 6 blades that ensure even lawn care, while original parts are often more expensive and do not always provide the same performance.
How long does the CUT GUARD blade disc for MOVA VIAX models last compared to other brands?
The CUT GUARD blade disc is made from robust material that guarantees high durability. On average, it lasts longer than many other aftermarket products, especially with regular use, as it has been specifically developed for the requirements of the MOVA VIAX 250, 300, and 500 lawn mower robots.
What problems commonly occur with the blade disc on MOVA VIAX 300 lawn mowers?
Users often report grass blockages when the cutting disc is worn or the blades are dull. This can not only significantly impair the efficiency of the lawn mower robot but also lead to an uneven cutting pattern, which can jeopardize lawn health.
How quickly is the CUT GUARD cutting disc for MOVA VIAX lawn mower robots delivered, and is there a return option?
The delivery of the CUT GUARD cutting disc usually takes place within 2-5 working days. If the disc does not meet your expectations, you can easily return it within 30 days, providing you with a high level of security when purchasing.