Cutting disc for Mammotion Yuka Mini and Yuka Mini 2 with blade guard and 6 replacement blades
- Blade disc for Mammotion Yuka Mini and Yuka Mini 2 robotic mowers
- With blade guard for safe and reliable use of the cutting system
- Includes 6 replacement blades for direct replacement of worn-out knives
- Does not get easily blocked by grass and supports an even lawn cut
- Ideal as a replacement blade disc for maintenance, repair, and preparation for the mowing season
Compatibility – Mammotion
Fits the following robotic mowers:
- ✓ Yuka Mini
- ✓ Yuka Mini 2
If your Mammotion Yuka Mini or Yuka Mini 2 suddenly cuts more sluggishly, this cutting disc with 6 replacement blades is exactly the quick way back to a clean cut.
This is how you get your lawn back to clean cutting edges
Dull blades tear the grass rather than cutting it—resulting in an uneven look, and the robotic mower runs longer. After a few weeks of use, the original blades lose their sharpness; the blades of grass are torn off instead of being cleanly cut through, and the lawn quickly looks frayed. With the right cutting disc for Mammotion Yuka Mini and Yuka Mini 2, you restore cutting performance to the point. Six fresh blades ensure an even, clean cut and a dense lawn appearance— a small change with a big impact for your garden.
Fits perfectly for your Mammotion Yuka Mini, among others
The cutting disc fits perfectly for the Mammotion Yuka Mini and Yuka Mini 2. Swap it without any tool drama: remove the blade protection, take off the old cutting parts, attach the new cutting disc—done.
Unbox, attach, mow away
The 6 replacement blades ensure a fine, even cutting pattern, so your lawn looks neat again. Sharp blades cut through the stems precisely instead of crushing them—something you can even see up close. The package includes blade protection and 6 replacement blades—ideal if you want to stock up on multiple replacements right away. That way, you’re ready for the entire season and don’t have to reorder every time parts wear out. Unbox, replace, done—no tools required.
So that no grass clogs up the disc anymore
With fresh mowing discs, the Mähteller is less prone to grass blockages and the robot makes its way through dense greenery more reliably. Damp clippings tend to build up over time around the blade plate and slow down the rotation—an idling mowing disc with sharp blades helps prevent this. This way, your Mammotion Yuka Mini and Yuka Mini 2 runs smoothly through your garden again instead of having to be constantly refueled. The difference is especially noticeable in everyday use after rainy days, when the grass grows back quickly.
All benefits at a glance
Top reviews
Passer til min Mammotion Yuka Mini 2, og klingeskyddet giver en bedre fornemmelse under drift. Jeg måtte dog lige justere udskiftningen af klingen, før den sad helt roligt.
Ich habe die Messerscheibe für meine Mammotion Yuka Mini 2 bestellt, weil nach ein paar Wochen Mähbetrieb die alten Klingen langsam nachließen. Mit dem Klingenschutz läuft alles ruhiger, und die 6 Ersatzklingen waren perfekt für den schnellen Tausch. Auf meinem kleinen Reihenhausgarten macht der Mähroboter einen deutlich gleichmäßigeren Schnitt, auch wenn das Gras mal etwas höher ist. Die Passform ist wie erwartet, einzig der Zusammenbau der neuen Klingen dauert bei mir etwas länger als gedacht.
works great with my yuka mini 2, cutting performance is solid and blades stay sharp.
funkar som utlovat till min yuka mini 2, med klingeskyddet känns det tryggare. leveransen tog dock längre än väntat.
J’ai remplacé la messerscheibe sur ma Mammotion Yuka Mini (j’ai un petit jardin en rangées derrière la maison) et j’ai vu la différence dès les premières sessions. Le carter de protection de lame rend l’ensemble plus rassurant, et les 6 lames de rechange m’ont permis de faire un échange rapide sans attendre. La coupe est plus régulière, surtout quand l’herbe pousse un peu plus vite. Je trouve juste que le montage des lames demande un peu de patience au début.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What influence does the CUT GUARD blade disc have on the cutting pattern and the lawn health of my Mammotion Yuka Mini?
The CUT GUARD blade disc ensures an even lawn cut, as it is equipped with a blade guard that prevents clumping with grass. This keeps the cutting performance consistent, leading to a healthier lawn area. A clean cutting pattern also promotes the regrowth of grasses and reduces the risk of diseases.
How do I change the blade disc for my Mammotion Yuka Mini 2?
Changing the blade disc is simple and can be done in about 10-15 minutes. You only need a Phillips screwdriver. First, remove the old blade disc by loosening the screws. Then, place the new CUT GUARD blade disc on and secure it again with the screws.
What are the advantages and disadvantages of the CUT GUARD blade disc compared to an original blade disc for the Mammotion Yuka Mini?
The CUT GUARD blade disc offers a cost-effective alternative to the original disc, which, however, has similar performance characteristics. An advantage is the additional blade guard that reduces clogging from grass. A disadvantage could be that original parts promise higher durability in some cases.
How quickly is the CUT GUARD blade disc shipped and can I return it if it doesn't fit?
The shipping of the CUT GUARD blade disc usually takes place within 2-3 working days after ordering. If you find that the disc does not fit, you can return it within 14 days, provided it is unused and in the original packaging. We offer a simple return process for dissatisfied customers.
How durable are the blades of the CUT GUARD blade disc for the Mammotion Yuka Mini and Yuka Mini 2?
The blades of the CUT GUARD blade disc are made of high-quality steel and are characterized by good cutting durability. With normal use, the blades should last several months, depending on lawn care and conditions. Additionally, 6 replacement blades are included, so you can quickly respond to wear.