Cutting disc compatible with Husqvarna Automower 305, 310, 315X, 405, 410 & 415 – Mowing disc with protection and 6 blades
- Blade disc compatible with Husqvarna Automower 305, 310, 315X, 405, 410, and 415
- Lawn mower cutting plate with protection and 6 blades for maintenance, replacement, and repair
- Grass-blocking arm cutting disc for a freer operation of the cutting system
- Suitable as a blade plate, cutting plate, or replacement blade disc for compatible Automower models
- Supports even blade guidance, clean blade rotation, and precise lawn cutting
incl. 6 blades
+
Compatibility – HUSQVARNA
Fits the following robotic mowers:
- ✓ Automower 305
- ✓ Automower 310
- ✓ Automower 315X
- ✓ Automower 405
- ✓ Automower 410
- ✓ Automower 415
Sharp 6-blade cutting disc for your HUSQVARNA Automower – so the mowing disc works cleanly through the grass again instead of pulling.
From torn-up to well-kept lawn
If your HUSQVARNA Automower 305, 310, 315X, 405, 410 or 415 noticeably cuts more slowly or the grass looks more “tangled up,” it’s usually due to dull blades. Over time, the original blades lose their sharpness, and the lawn looks frayed instead of well-groomed. With this cutting disc, you restore a fresh cut and give your mowing disc back its proper performance. Six sharp blades ensure a clean, even cutting pattern across the entire area.
Fits perfectly for your HUSQVARNA Automower 305, among others
The cutting disc is compatible with HUSQVARNA Automower 305, 310, 315X, 405, 410 & 415 and fits precisely onto the mowing disc. Replacement is quick: remove the old cutting disc, attach the new cutting disc—no fiddling with tools.
Get started right away—without extra accessories
The 6 blades ensure a more even cutting pattern, so the grass is cleanly trimmed. Sharp cutting edges leave smooth cut surfaces that heal faster—the lawn stays healthy and dense. Included is the cutting disc with protection and the 6 blades—ready to be installed in your Automower. The protective design keeps each blade in position—once fitted, the disc is in place in just a few hand movements.
Blockage-free all season long
With sharp blades, the risk is reduced that grass will mow disc “clog” or that blockages will occur. Sticky clippings are the most common reason for tired discs—sharp cutting edges prevent them from sticking in the first place. Result: your HUSQVARNA Automower runs more reliably and keeps cutting evenly instead of stopping more often. Fewer interruptions and a consistently well-kept lawn.
What makes this set stand out
Top reviews
fits my husqvarna automower 315x nicely and the 6 blades with the protective guard feel solid. after swapping it, the blades ran smoother and the cut looked more even. only thing is the installation instructions could be a bit clearer for first-timers though.
works perfectly with my Husqvarna Automower, cuts the grass nice and evenly.
Wymieniłem tę tarczę w moim Husqvarnie 310 i działa od razu bez kombinowania. Ma osłonę ochronną i 6 klingen, po montażu kosiarka prowadzi klingen równo i zostawia czysty, równy pas trawy.
pas perfekt til min husqvarna automower 410, og de 6 klinger med beskyttelsen sidder solidt. efter udskiftningen kører den mere jævnt, og græsset bliver klippet pænere
Ich habe die Messerscheibe für meinen Husqvarna Automower 405 bestellt, weil die alten Klingen nach dem langen Sommer bei unserem 300-m²-Garten nicht mehr richtig gleichmäßig gelaufen sind. Mit der neuen Scheibe mit Schutz und den 6 Klingen fährt alles wieder ruhiger und das Schnittbild ist deutlich sauberer, vor allem an den Kanten. Ein kleiner Haken: Beim Montieren musste ich erst kurz in die Guide schauen, weil die Position der Grasblockierungsarme nicht sofort selbsterklärend war.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How does the CUT GUARD blade disk affect the cutting pattern of my Husqvarna Automower 405?
The CUT GUARD blade disk with its 6 blades ensures a precise cutting pattern as it optimally guides the blades and allows for even rotation. A clean cutting pattern also promotes lawn health, as the grasses are less susceptible to diseases.
What advantages does the CUT GUARD blade disk offer compared to the original disk for the Husqvarna Automower 310?
The CUT GUARD blade disk is a cost-effective alternative to the original disk, but offers the same functionality and quality. It also has reinforced protective mechanisms that extend its lifespan and reduce the risk of damage from shocks.
How can I tell that I need to replace the blade disk of my Husqvarna Automower 315X?
A clear sign that the CUT GUARD blade disk needs to be replaced is an uneven cutting pattern or the robot frequently getting stuck in grass clippings. Visible wear or cracks on the blades are also warning signs that necessitate a replacement.
What happens if I use an incompatible blade disk on my Husqvarna Automower 410?
Using an incompatible blade disc can lead to an imbalance in the cutting system, which not only affects performance but can also damage the motor and other components. This could result in expensive repairs and significantly shorten the lifespan of the robotic mower.
How long does shipping take for the CUT GUARD blade disc for the Husqvarna Automower 405 and can I return it?
Shipping of the CUT GUARD blade disc usually takes place within 2-3 business days after ordering. If you are not satisfied with the product, we offer a hassle-free return within 30 days, allowing you to test it risk-free.