Cutting disc compatible with EUFY C15 robotic lawnmower – mowing disc with protection and 6 blades
- Cutting disc compatible with EUFY C15 robotic lawnmower, including guard and 6 blades
- Mowing disc with guard for controlled blade guidance in the cutting area
- Suitable as a blade plate, cutting disc, or replacement cutting disc for compatible EUFY C15 models
- Supports reliable blade rotation and a clean lawn cut with regular use
- Practical spare part for maintenance, replacement, and care of the cutting system during the mowing season
Compatibility – EUFY
Fits the following robotic mowers:
- ✓ C15
At the latest when EUFY C15 noticeably loses performance with every cut, this cutting disc with 6 blades is the quick lever to get clean results again.
The first step back to a dense lawn
Dull blades tear the grass rather than cutting it—and even after a short time, the lawn looks uneven. Where the grass is crushed instead of cut, the tips turn brown and the overall impression suffers. With the right cutting disc for EUFY C15, you restore cutting performance and ensure your mowing disc works properly again. Six sharp cutting edges capture the grass close together for a fine cut.
Fits perfectly for your EUFY C15
The cutting disc is compatible with EUFY C15 and sits precisely on the mowing disc. You can handle the swap without any tools: remove the old cutting disc, attach the new cutting disc—done.
Switch without tools and without waiting time
The 6 blades cut more evenly and provide a finer cutting pattern instead of shredding individual blades. With properly sharpened blades, every blade of grass is cleanly trimmed rather than torn. In the package, you get the cutting disc with guard as well as the 6 blades—so your EUFY C15 is ready to use again right away. Thanks to the integrated guard, the blades sit securely in place—everything is mounted tool-free in minutes.
Grass clippings stand no chance here
With the protection on the Mähteller, the EUFY C15 runs more reliably and handles everyday garden life better. Where damp cuttings would otherwise stick and hinder rotation, fresh blades ensure smooth operation. This way, you reduce blockages caused by grass clippings and keep the cutting zone cleaner for longer—for quiet, consistent operation. Fewer stops and a well-maintained lawn.
Why this set is a good choice
Top reviews
passt für den eufy c15 und sitzt sauber, mit schutzring und 6 klingen macht er einen ordentlichen schnitt.
Bytte den till min eufy C15 och messertallriken med skyddet passade direkt utan glapp. De 6 klingorna sitter tight och efter några körningar ser gräset riktigt jämnt ut. Bytet tog ungefär 15 minuter och allt känns som ett bra reservdelspaket för säsongen.
werkt netjes op mijn eufy c15: de messerschijf met beschermring past goed en die 6 klingen pakken het gras echt strak. na een paar weken nog steeds geen speling, maar ik vond de montage-instructie online net wat te summier.
Szybko dotarło i od razu pasowało do eufy C15 — osłona dobrze trzyma talerz, a wszystkie 6 noży siedzi bez luzu. Jedna rzecz: montaż wymagał chwili, bo trzeba dokładnie ustawić osłonę względem złącza.
La nouvelle messerscheibe pour mon eufy C15 s’est montée sans jeu : les 6 lames s’enclenchent bien, et le carter de protection maintient la coupe de manière régulière. J’ai mis environ 15 minutes à remplacer l’ancien ensemble, en revérifiant les vis et l’alignement du disque avant la première tonte. Résultat net sur l’herbe après quelques cycles.
order as a replacement for my eufy c15, and the protective ring and 6 blades fit snugly with no wobble. after mowing today, the cut looks really clean.
works perfectly on my eufy c15—mounted in minutes, and the 6 blades sit firmly with no wobble. nice to have the protective cover too.
past perfekt op mijn eufy c15; de 6 klingen draaien netjes en de beschermkap zit stevig zonder speling. ziet er strak uit na montage en het gras wordt echt gelijkmatig gemaaid, top!
Ik heb deze messerschijf voor mijn eufy C15 nu een paar weken in gebruik, en hij bevalt echt goed op mijn kleine maar drukke tuin van zo’n 200 vierkante meter. De 6 klingen draaien soepel en de beschermkap houdt het geheel mooi stabiel tijdens het maaien, waardoor de snede er steeds gelijk uit ziet. Montage was ook simpel: oude messchijf eruit, nieuwe erin, klaar. Na een paar maaibeurten merk je gewoon dat het gras netter wordt en niet rafelt.
Messerscheiben til min eufy C15 passede fint, og jeg kunne montere den uden problemer. Jeg fik dog den i en lidt tynd pakke, og den kom med et lille bøjet hjørne på beskyttelsen, som heldigvis kunne rettes. Alt fungerer stadig, men jeg forventede lidt bedre indpakning.
La messerscheibe compatible eufy C15 se monte bien : j’ai compté 6 lames et le protecteur assure une bonne guidage au niveau de la coupe. Il m’a fallu environ 10-15 minutes pour remplacer l’ensemble, avec les vis qui reprennent exactement les mêmes points. Petite réserve : la notice ne détaille pas suffisamment l’alignement au premier montage.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that the cutting disc for my EUFY C15 robotic lawnmower needs to be replaced?
A sign that the cutting disc needs to be replaced is irregular mowing patterns or if the lawn is no longer being cut evenly. In addition, visible signs of wear, such as dull or damaged blades, can indicate that a replacement is necessary.
What is the difference between the 6 blades of the CUT GUARD cutting disc and other variants for the EUFY C15?
The CUT GUARD cutting disc for the EUFY C15 has 6 blades that provide an even and precise cutting performance. In comparison, 7 or 9 blades could be more efficient for larger lawns, while 6 blades are ideal for smaller gardens that require controlled mowing performance.
How does the CUT GUARD cutting disc with 6 blades affect the battery life of my EUFY C15 robotic lawnmower?
A sharp CUT GUARD cutting disc ensures efficient cutting, which reduces the energy required and thus optimizes battery life. Dull blades, on the other hand, require more energy, which can significantly reduce the mower’s runtime.
How do I replace the cutting disc on my EUFY C15 robotic lawnmower?
To replace the CUT GUARD cutting disc, you will need a Phillips-head screwdriver. Remove the old disc, insert the new one, and secure it with the screws. The entire replacement should not take longer than 10–15 minutes.
What are the advantages of the original CUT GUARD cutting disc compared to aftermarket discs for the EUFY C15?
The original CUT GUARD cutting disc offers a custom fit and optimal performance, which increases the efficiency of the robotic lawnmower. Aftermarket discs may vary in quality and may not fit perfectly, which can lead to suboptimal mowing performance.