Blade disc for EUFY E15 & E18 robotic lawnmowers – mowing plate with blade protection and 6 blades
- Blade disc for EUFY E15 and EUFY E18 robotic mowers with matching blade guard
- Includes 6 blades for quick replacement of worn or dull knives
- Maintenance-friendly mowing plate that reduces grass accumulation on the cutting system
- Suitable as a blade plate, replacement mowing plate, or cutting disc for compatible EUFY models
- Durable and safe solution for clean blade guidance and even lawn cutting
incl. 6 blades
+
Compatibility – EUFY
Fits the following robotic mowers:
- ✓ E15
- ✓ E18
Especially when your EUFY E15 or E18 pulls rather than cleanly cuts during mowing, the right cutting disc with 6 blades is the fastest way back to an even cut.
No more uneven cut edges
Dull blades tear the grass instead of cutting it—you’ll notice it right away with uneven edges and areas the robotic mower keeps running over again and again. After a while, the original blades wear down, and the lawn looks frayed instead of well-groomed. With the right cutting disc for EUFY E15 & E18, you restore cutting performance to the point and save yourself unnecessary runtime. Six sharp blades ensure an even, clean cutting pattern.
Fits perfectly for your EUFY E15 and others
The cutting disc is designed specifically for EUFY E15 and E18—no guesswork, no tinkering. You can swap it out easily: remove the old cutting disc, install the new one—tools are usually not needed.
The quick way to fresh blades
The Mähteller version comes with blade protection and 6 blades, so the cutting head works cleanly and the blades grip evenly. Fresh blades cut through the stalk smoothly instead of crushing it—your lawn will thank you with a rich green. You get the complete cutting unit, so you can get back to mowing right away. The blade protection keeps the blades securely in place; the swap takes just a few minutes and requires no tools.
Fewer stops, more mowed area
With the sharp 6 blades, the mowing disc cuts the grass more finely and thus reduces typical grass clogs. Otherwise, damp clippings tend to collect around the blades and slow down rotation—an overrunning mowing disc keeps the flow of grass moving. Result: your EUFY E15/E18 runs more reliably, mows more evenly, and stays on pace even in denser growth. Fewer stops, less rework, and a neatly maintained lawn.
Your benefits at a glance
Top reviews
Well-made cutting blade. The blade replacement was quick, but it was a bit difficult to install.
Past perfect voor mijn E18. De klingbeschermer en de 6 messen zijn echt netjes en degelijk.
Really good quality and easy to assemble. Cuts perfectly!
Swapped this mower blade disc on my EUFY E18 and it fit exactly like it should. The blade guard is a nice touch, and the 6 included blades made it easy to replace everything at once—no hunting around for compatible parts. After a week on my 200 m² lawn, the cut looks even and I’m seeing less grass buildup around the cutting area. Installation was straightforward once I followed the alignment carefully.
Jeg købte denne messerscheibe til min EUFY E18 efter trying two other brands, fordi jeg ville have noget der passede helt uden bøvl. Den kom med klingenschutz og 6 klinger, og selve udskiftningen gik hurtigt, og jeg kan især se færre græsansamlinger omkring skæresystemet. Jeg gav 4 ud af 5, fordi den kræver lidt mere præcis montering første gang, før den sidder helt plant. Ellers virker den stabil og giver et pænt og jævnt snit.
ça se monte facilement sur mon e15, et le protège-lame limite bien les brins qui s’accrochent. petite réserve : il faut être assez précis pour que ça repose bien à plat.
Passt für meinen EUFY E15 wie beschrieben. Ich habe den Mähteller gewechselt und direkt den Klingenschutz montiert; die 6 Klingen waren schnell getauscht, ohne dass ich noch Ersatz suchen musste. Nach ein paar Durchgängen wirkt der Schnitt gleichmäßiger und es sammelt sich weniger Gras am Schneidsystem.
Fits my EUFY E18 perfectly. The blade disc with the protective guard is a straightforward swap, and the included 6 replacement blades saved me from ordering extras. After a couple of mowing runs, the cut looks more even and there’s less grass buildup around the cutting system.
Snabb leverans och den passar EUFY E15 som den ska, inklusive klingeskyddet. Jag fick byta om en gång för att den skulle ligga helt plant, annars ger den jämnare snitt.
After trying two other brands, this messer disc for my EUFY E15 finally fit without fuss. The included guard snaps on cleanly, and the 6 blades are easy to swap—my cutting deck feels much steadier, with less grass buildup around the blades after a few runs. The only downside is the disc is a little tight to seat at first, so I had to press firmly to get it aligned.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What problems occur if I do not install the CUT GUARD blade disc correctly on my EUFY E15 lawn mower?
Incorrect installation of the CUT GUARD blade disc can lead to uneven blade rotation, resulting in a jerky cut and irregular mowing results. Additionally, the mowing disc may come loose and cause damage to the lawn mower.
What happens if I combine the CUT GUARD blade disc with an incompatible blade disc?
Using an incompatible blade disc can create imbalances that overload the motor of your EUFY E15 or E18. This can not only shorten the lifespan of the lawn mower but also lead to serious damage to the internal components.
How does the CUT GUARD blade disc affect the cutting pattern and lawn health on my EUFY E18?
The CUT GUARD blade disc with 6 blades ensures a clean cut, promoting lawn health. An even cut prevents the grass from tearing or turning brown, which can lead to poor appearance and unhealthy lawn areas with improper blade selection.
How durable are the blades of the CUT GUARD blade disc for EUFY E15 and EUFY E18?
The blades of the CUT GUARD blade disc are made from high-quality material, ensuring a long lifespan. With regular use, the blades should be replaced every 2-3 months to maintain optimal mowing performance.
What are the differences between the 6 blades of the CUT GUARD blade disc and other blade variants for lawn mowers?
The 6 blades of the CUT GUARD blade disc are ideal for medium to large lawns, as they provide good cutting performance. In comparison, 7 or 9 blades offer more intensive processing for fine grasses, which is advantageous for densely vegetated lawns.