Blade disc for ECOVACS GOAT O500, O800, O1200, G1-800 and G1-2000 with blade guard and 6 replacement blades
- Blade disc for ECOVACS GOAT O500, O800, O1200, G1-800 and G1-2000
- Ideal as a replacement part for worn or damaged robotic lawnmower blades
- Includes blade guard for safe and reliable use
- Delivery includes: 1 blade disc with guard and 6 replacement blades
- Supports a clean, even lawn cut
Compatibility – ECOVACS
Fits the following robotic mowers:
- ✓ GOAT O500
- ✓ GOAT O800
- ✓ GOAT O1200
- ✓ GOAT G1-800
- ✓ GOAT G1-2000
As soon as your ECOVACS GOAT pulls rather than cuts when mowing, the right cutting disc with 6 replacement blades is the quick lever for getting clean cuts again.
If ECOVACS only tears the grass instead of cutting it
Dull blades cause the grass to fray; the mowing disc jerks, and you have to do touch-ups much more often. After a few weeks of use, the original blades lose their sharpness—the stems are then more likely to be torn off than cleanly cut through, and the lawn quickly looks unkempt. With this cutting disc for ECOVACS GOAT O500, O800, O1200, G1-800 and G1-2000, you restore full cutting performance. Six sharp blades ensure an even, fine cutting pattern, and the integrated blade protection keeps the blades securely in place—for reliable operation throughout the entire season. A small adjustment that helps your GOAT robotic mower get back to a clean, dense lawn.
Fits perfectly for your ECOVACS GOAT O500 and more
The cutting disc is designed for the ECOVACS GOAT models GOAT O500, GOAT O800, GOAT O1200, GOAT G1-800 and GOAT G1-2000. You can swap it out easily, without any fiddling with tools—just attach it and you’re done.
Replacement blades for a finer cutting pattern
The 6 replacement blades ensure a more even cutting pattern, so the grass is cut cleanly instead of only being “scraped.” The package includes the cutting disc with blade guard and the 6 replacement blades—ideal if you want to get back to mowing right away.
Less grass clogging, more power
With fresh blades on the mowing disc, your ECOVACS GOAT runs more smoothly and reliably because less grass gets stuck. This reduces blockages and helps the robot keep mowing consistently even in denser growth.
The most important points at a glance
Top reviews
Szybko przyszło i pasuje do mojego ECOVACS GOAT O1200 bez problemu. W zestawie jest osłona noża i 6 klingów, ale czuć, że jedna z klingów była minimalnie tępa.
The blade department for the ECOVACS GOAT is solid and does its job well, but the packaging was not as sturdy as expected, causing one of the blades to arrive slightly damaged. After trying two other brands, I found that this one offers a better cutting experience, and the included protection is a nice extra. It is a good purchase for anyone who wants to maintain their robotic lawnmower well.
Messerscheibe met Klingenschutz er præcis til min ECOVACS GOAT O800, og der fulgte 6 udskiftningsklinger med. Jeg skiftede den på ca. 15 minutter, og der skal kun håndteres et par skruer/fastgørelser, før den sidder helt plant. Klippesnittet er blevet jævnt igen, og ingen klinger virker løse efter montering!
Arrived quickly and fits perfectly! The blade guard provides additional safety while mowing.
Livraison rapide, la pièce s’adapte parfaitement à mon ECOVACS GOAT O500. Les 6 lames de rechange coupent nettement plus propre.
Passar perfekt till min ECOVACS GOAT O800. Klingen med Klingenschutz känns stabil, och de 6 ersättningsbladen räcker länge.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that the blade disc for my ECOVACS GOAT O500 needs to be replaced?
A clear warning sign for replacing the blade disc is uneven cutting edges and an inconsistent mowing result. Additionally, signs of wear such as visible cracks or damage to the blade disc may occur. If your robotic mower is unusually loud or the battery life decreases, this may also indicate worn blades.
How do I replace the blade disc on my ECOVACS GOAT O800?
Replacing the blade disc is done in a few steps: First, you should turn off the robotic mower and remove the protective cover. Then you will need a Phillips screwdriver to loosen the screws of the old blade disc. Place the new CUT GUARD blade disc on and tighten the screws again. The entire process should take no longer than 15 minutes.
How does the CUT GUARD blade disc affect the battery life of my ECOVACS GOAT G1-800?
A new CUT GUARD blade disc ensures a clean and effective cut, which positively affects battery life. When the blades are sharp, the robotic mower requires less energy to cut through the grass. This not only increases efficiency but also promotes a healthier lawn, as less energy needs to be expended.
How long does shipping take for the CUT GUARD blade disc for the ECOVACS GOAT O1200, and can I return it?
The shipping of the CUT GUARD blade disc usually takes place within 2-3 working days. If the product does not meet your expectations, you can return it within 30 days of receipt, provided it is unused and in the original packaging. We guarantee a hassle-free return to earn your trust.
Is the CUT GUARD blade disc compatible with my ECOVACS GOAT G1-2000 and what are the advantages compared to the original disc?
Yes, the CUT GUARD blade disc is specifically designed for the ECOVACS GOAT G1-2000. The advantage compared to the original disc lies in the combination of high-quality blade protection and 6 replacement blades. This equipment ensures a longer lifespan and more safety during mowing operations, while the original disc may be more expensive and less robust.