Blade disc compatible with Gardena Sileno Minimo robotic lawnmower – Mowing plate with protection and 6 blades
- Blade disc compatible with Gardena Sileno Minimo robotic mower, including protection and 6 blades
- Grass-blocking low-mow plate compatible with Sileno Minimo for freer operation of the cutting system
- Suitable as a knife plate, cutting disc, or replacement mow plate for compatible Gardena Sileno Minimo models
- Supports clean blade guidance and even lawn cutting on small lawns
- Durable spare part for maintenance, replacement, and reliable lawn care during the season
incl. 6 blades
+
Compatibility – GARDENA
Fits the following robotic mowers:
- ✓ Sileno Minimo
As soon as your GARDENA Sileno Minimo suddenly mows more sluggishly or the grass “pulls” instead of being cleanly cut, the right cutting disc with 6 blades is the quick lever back to proper cutting.
So GARDENA cuts cleanly again
Dull blades quickly turn a clean cut into a restless picture: the grass is no longer trimmed evenly and the robotic lawnmower needs longer. Over time, this also puts strain on the motor, which has to work against the resistance. With the cutting disc for GARDENA Sileno Minimo, you restore fresh cutting performance in the mowing disc – without having to search for the right solution for a long time. Six sharp blades ensure a clean, dense cutting pattern.
Fits perfectly for your GARDENA Sileno Minimo
The cutting disc is compatible with the GARDENA Sileno Minimo and is positioned so that the mowing disc works cleanly again. The swap is straightforward: remove the old cutting disc, attach the new cutting disc—tools are usually not necessary.
Ready from the very first minute
Six blades ensure a more even cutting pattern, so your lawn is trimmed properly and finely again. Instead of shredding the blades, fresh blades cut them cleanly—keeping the grass roots healthy. In the package, you get the cutting disc / mowing disc unit with guard and 6 blades—ready for installation. With the guard, the blades stay precisely aligned; installation takes only a few minutes.
Uninterrupted mowing even in dense growth
With sharp blades, the risk is reduced that grass will mow disc up or that the robot gets “stuck” more often. Otherwise, damp clippings collect around the blades and slow down rotation—an overrunning mowing disc keeps the flow of grass moving. Result: reliable operation, fewer interruptions, and a mowing process that feels familiar again. Your GARDENA Sileno Minimo can glide through its routes calmly again.
Key details at a glance
Top reviews
funkar bra till min gardena sileno minimo, och de 6 knivarna ger jämnare klipp på den lilla gräsmattan. skyddet sitter okej men tog lite pill första gången, därför inte full pott.
works with my gardena sileno minimo; the 6 blades cut evenly, and the protective guard helps reduce clogs. quick replacement too.
Fick hem denna Messerscheibe till min Gardena Sileno Minimo och bytet gick snabbt, cirka 10–15 minuter. Den kommer med 6 klingen och en skyddskåpa som verkligen minskar gräsblockering, och jag behövde inte ens kämpa med några extra skruvar för att få allt i rätt läge. Skärningen ser jämn ut även på mina mindre ytor.
funktioniert gut mit meinem sileno minimo, und die 6 klingen schneiden sauber und gleichmäßig. ein bisschen fummelig beim aufsetzen des schutzes gewesen.
Super happy with this blade disc! It really ensures a neat mowing job and the extra blades are just perfect. The installation was a piece of cake. Recommended for anyone with a Gardena Sileno Minimo!
pasuje bez problemu do mojego gardena sileno minimo, a ta osłona robi różnicę przy zbieraniu uciążliwej trawy. wymiana trwała mi jakieś 10 minut, w zestawie są 6 klingen i po założeniu trawnik wygląda równo, bez poszarpanych końcówek.
Ça se monte facilement sur mon Gardena Sileno Minimo, et les 6 lames coupent net. Le protège-mélautier est un peu délicat à positionner au début.
Jeg bestilte Messerscheibe til min Gardena Sileno Minimo, og den passede uden problemer. Med 6 klinger får den faktisk en jævn klipning på mine små bede, og beskyttelsen virker til at mindske, at græs sætter sig fast. Udskiftningen tog mig omkring 15 minutter. Den eneste lille ting er, at beskyttelsesskjoldet godt kan være lidt følsomt at få helt korrekt i position første gang.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Is the CUT GUARD blade compatible with my Gardena Sileno Minimo robotic mower?
Yes, the CUT GUARD blade is specifically compatible with the Gardena Sileno Minimo robotic mower. It serves as a replacement cutting disc for all models in the Sileno Minimo series, including model numbers 19060-20 and 19061-20.
How long does shipping take and how can I return the blade if it doesn't fit?
Shipping of the CUT GUARD blade usually takes place within 1-3 business days. If you need to return the blade, you have 30 days from receipt of the goods to initiate a return. We will cover the return shipping costs if the product is defective or not as described.
What happens if I choose the wrong blade for my robotic mower?
Using an incompatible blade can lead to an imbalance in the robotic mower. This can cause damage to the drive and cutting system, which may result in costly repairs. Therefore, we recommend carefully checking compatibility before purchase.
What material is the CUT GUARD blade made of and how durable is it?
The CUT GUARD blade is made of robust, high-quality steel that guarantees high durability and resistance to wear. The 6 blades are specially hardened to ensure clean cutting performance even with frequent use.
How can I tell that the blades of my cutting disc need to be replaced?
A blade replacement is necessary if you notice that the robotic mower is no longer mowing evenly or the grass looks frayed. Increased noise levels or grass clippings left behind after mowing are also signs that the blades or the entire cutting disc should be replaced.