9-blade cutting disc for Segway Navimow H-Series H500E, H800E & H1500E – Precision mowing disc with 9 blades
- 9-blade cutting disc for Segway Navimow H-Series H500E, H800E, and H1500E robotic mowers
- Precision mowing disc with 9 blades for a finer and more even cut
- Suitable as a replacement cutting disc in case of wear, damaged cutting disc, or declining mowing performance
- More cutting points support clean blade guidance during regular lawn maintenance
- Compatible spare part for maintenance, replacement, and reliable cutting performance during the gardening season
incl. 9 blades
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow H500E
- ✓ Navimow H800E
- ✓ Navimow H1500E
As soon as your SEGWAY Navimow H500E, H800E or H1500E starts mowing noticeably more slowly or the grass seems to be “torn” rather than cut cleanly, the 9-blade cutting disc with 9 blades is exactly the quick fix for clean cuts.
When SEGWAY only tears the grass instead of cutting it
Dull blades mean: uneven mowing paths, more rework, and often also more stress for the mowing disc. The motor has to work against the resistance, which costs runtime and energy. With the 9-blade cutting disc for SEGWAY Navimow H-Series H500E, H800E & H1500E, you bring the cutting performance back to the point—so your lawn looks even and neat again. The 9-blade setup stands for the finest cut of the model series.
Fits your SEGWAY Navimow H500E, among others
The 9-blade cutting disc fits perfectly for the Navimow H500E, Navimow H800E, and Navimow H1500E. Swapping it on the mowing disc is straightforward and handled without any tool puzzles—just replace it and keep mowing.
Ready to install
The cutting disc works with 9 blades for a finer cutting pattern and consistent results across the entire mowing width. Additional edges provide seamless coverage—something you can feel when walking barefoot. You get the 9-blade cutting disc as a complete replacement—ready for direct installation on the Navimow mowing disc. The swap is done in just a few minutes, completely without tools.
Less grass clumping, more power
With sharp blades, the cutting disc reduces the typical grass blockages on the mowing disc, because the cut material is removed cleanly. Otherwise, damp material sticks around the blades and slows down rotation—an overrunning mowing disc keeps the flow of grass moving. This helps your SEGWAY Navimow run more reliably even when the grass is a bit denser. Fewer stops, less rework, and a consistently well-kept lawn.
The key points at a glance
Top reviews
Schnell levererat och passade Segway Navimow H500E direkt utan strul. Ger jämnare klippning med 9 knivar och känns robust.
snelle levering, en voor mijn navimow h1500e paste de 9-klingen messchijf precies. na montage maait hij weer strakker en gelijkmatiger.
Je l’ai remplacé sur mon Segway Navimow H500E, et l’alignement est nickel. La coupe est plus régulière, avec une meilleure finition sur l’herbe un peu dense.
Installation sur mon Segway Navimow H800E facile et le disque est bien ajusté. Le résultat est net : avec les 9 lames, la coupe est plus régulière, surtout quand l’herbe est un peu haute. Correspond exactement à la pièce d’origine, pas de mauvaise surprise.
The new blades provide a nice cut, but delivery was a bit delayed.
Commande reçue rapidement et la 9er-Messerscheibe s’adapte nickel sur mon Segway Navimow H800E. La coupe est plus régulière et l’herbe ressort mieux, même quand elle est un peu dense.
mounted it on my navimow h800e, and the 9 blades made the cut look much more even. took a bit longer than expected because one part cover was slightly tricky.
Great blades, easy installation, and better cutting quality! I recommend it to everyone.
passt für meinen navimow h500e, schnittbild ist deutlich gleichmäßiger. ein stern abzug, weil die anleitung nur knapp ist.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does shipping take for the CUT GUARD 9-blade cutting disc for my Segway Navimow H500E?
The delivery of the CUT GUARD 9-blade cutting disc for Segway Navimow H500E usually takes place within 2-4 working days after ordering. If you order before 2 PM, your package is usually shipped the same day. Returns are possible within 30 days, provided the product is unused.
How do I change the 9-blade cutting disc on my H800E robotic mower?
Changing the CUT GUARD 9-blade cutting disc on the Segway Navimow H800E is done in a few steps: First, turn off the robotic mower and unplug it. Use a Phillips screwdriver to loosen the screws of the old cutting disc. Place the new disc on and secure it with the same screws. The entire process should take no longer than 15 minutes.
How does the 9-blade cutting disc affect the battery life of my Segway Navimow H1500E?
The CUT GUARD 9-blade cutting disc provides a more even cutting pattern due to the additional cutting points, which means the robotic mower can work more efficiently. This can positively affect battery life, as less energy is needed for cutting, especially during regular mowing. This also contributes to the health of the lawn.
What is the difference between the 6-blade, 7-blade, and 9-blade cutting discs from CUT GUARD, and which is best suited for my lawn?
The 6-blade disc offers fewer cutting points and is ideal for less demanding lawns. The 7-blade version is suitable for moderately complex lawns, while the 9-blade disc is designed for the best cutting results on demanding, well-maintained lawns like your Segway Navimow H500E. It allows for finer and more even mowing.
How do I know when to replace the CUT GUARD 9-blade disc?
There are several warning signs that indicate the 9-blade disc of your Segway Navimow H-Series robotic mower should be replaced. These include an uneven cutting pattern when the lawn is no longer being cut evenly in some areas, or visible signs of wear on the blades. A louder operating noise during mowing can also indicate that a replacement is necessary.