9-blade cutting disc for Segway Navimow i208 AWD, i215 LiDAR & i220 LiDAR – Precision mowing disc with 9 blades
- 9-blade cutting disc for Segway Navimow i208 AWD, i215 LiDAR, and i220 LiDAR robotic mowers
- Precision mowing disc with 9 blades for a finer and more even cutting pattern
- Ideal as a replacement cutting disc in case of wear, damaged cutting disc, or declining cutting quality
- More cutting points support clean blade guidance in modern AWD and LiDAR robotic mowers
- Suitable spare part for maintenance, replacement, and reliable lawn care during the gardening season
incl. 9 blades
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow i208 AWD
- ✓ Navimow i215 LiDAR
- ✓ Navimow i220 LiDAR
More clean cuts and less hassle in the garden: with the 9-blade cutting disc from SEGWAY for Navimow i208 AWD, i215 LiDAR & i220 LiDAR, your mowing disc runs smoothly again.
So SEGWAY cuts cleanly again
When the blades become dull, the Navimow no longer pulls the grass through cleanly—it remains torn and standing, and the cut looks uneven. As soon as the initial equipment becomes dull, the lawn visibly loses freshness and density. This is exactly where the 9 cutting disc for SEGWAY Navimow i208 AWD, i215 LiDAR & i220 LiDAR comes in: it restores cutting performance and ensures an even result with every pass. Nothing finer exists in this series—nine cutting edges in continuous use.
Fits your SEGWAY Navimow i208 AWD, among others
The 9er cutting disc fits exactly for SEGWAY Navimow i208 AWD, Navimow i215 LiDAR and Navimow i220 LiDAR. The swap is quick and easy—no long tool-fiddling—so your robot can mow again right away.
Ready to go from the very first minute
The cutting disc works with 9 blades and therefore delivers a finer cutting pattern instead of simply tearing the grass. The more cutting points work simultaneously, the denser and more even the lawn looks. You get the 9er cutting disc as a complete set for your precision mowing disc—ready for replacement. The swap can be done in just a few minutes, completely without tools—ideal for the start of the season or when the blades start to wear down mid-season.
Smooth mowing even in dense growth
With a sharp cutting edge, the cutting disc reduces typical grass clogs on the mowing disc, because the clippings are discharged cleanly. Otherwise, damp material collects around the blades and slows down rotation—sharp, freely running blades counteract this. Result: reliable operation, fewer interruptions, and a Navimow that once again drives through with full cutting power—even in dense or damp growth.
Key details at a glance
Top reviews
Sur mon Segway Navimow i215 LiDAR, la 9er-Messerscheibe rend la coupe plus régulière : on voit la différence sur les zones qui avaient tendance à laisser un léger aspect haché. Le remplacement m’a pris environ 15 minutes, avec 9 tranchants à bien aligner et les vis à resserrer proprement.
good quality, but a bit difficult to install. cuts really well!
After trying two other brands, I am pleasantly surprised by this 9-blade cutting disc. The cutting result is much better and the grass looks more even. The 9 cutting edges really provide a neater finish, even in more difficult corners of the garden. The installation also went quite smoothly. This is definitely a recommendation for anyone looking for a reliable replacement disc!
It arrived quickly and fits perfectly with my robotic lawnmower. The quality is great, the cutting is much better!
ok grej till navimow i220 lidar, märker jämnare klippning, men leveransen tog lite längre än väntat.
works well on my segway navimow i215 lidar; the 9 blades give a more even cut. takes a bit longer to swap than expected, but it’s fine.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does shipping take for the CUT GUARD 9-blade disc for my Segway Navimow i208 AWD?
Shipping for the CUT GUARD 9-blade disc usually occurs within 2-3 business days after the order is received. We offer a 30-day return guarantee if the product does not meet your expectations.
What material is the CUT GUARD 9-blade disc made of and how durable is it?
The CUT GUARD 9-blade disc is made of high-quality, hardened steel, which guarantees high durability and resistance to wear. Customers report excellent longevity, typically lasting several mowing seasons.
What common problems occur when using the CUT GUARD blade disc with my Segway Navimow i220 LiDAR?
A common problem is insufficient cutting performance, which can occur when the blade disc is worn or damaged. Improper installation can also cause the robotic mower to mow unevenly or create navigation issues.
How can I tell that the blades of the CUT GUARD 9-blade disc need to be replaced?
Signs that a blade replacement is necessary include an uneven cutting pattern, increased noise levels during mowing, and visible wear or damage to the blades themselves. Additionally, the robotic mower may have difficulty navigating through tall grass.
What impact does the CUT GUARD 9-blade disc have on the cut appearance and the health of my lawn?
The 9-blade disc provides a finer and more even cut appearance, which promotes lawn health, as clean cuts facilitate the healing of grass plants. Additionally, the improved cutting quality can also optimize the battery life of your Segway Navimow robotic mower, as less power is needed to cut through the grass.