9-Blade Cutting Disc for MOVA VIAX 250, 300 & 500 Robotic Lawn Mowers – Fine-Cut Cutting Plate & Blade Plate
- 9-blade cutting disc for MOVA VIAX 250, 300, and 500 robotic mowers
- More cutting points for a finer cut and a more even lawn surface
- Suitable as a replacement cutting disc when the existing blade disc is worn or damaged
- Supports clean blade rotation with regular maintenance of small to medium-sized lawns
- Relevant spare part for users who want to keep their MOVA VIAX robotic mower precise and ready for the season
incl. 9 blades
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ VIAX 250
- ✓ VIAX 300
- ✓ VIAX 500
If your MOVA VIAX 250, 300, or 500 suddenly tears instead of cutting cleanly, the 9-blade cutting disc is the quick way back to a fine-cut pattern.
When mowing takes longer than before
Dull blades quickly turn grass clippings into a restless, uneven result—and the grass looks more “worn out” after mowing than freshly cut. The blades are torn rather than cleanly cut through, and the lawn discolors at the tips. With the 9-blade cutting disc for MOVA VIAX 250, 300 & 500, you’ll get your VIAX back to full performance: more clean cuts, less hassle in everyday life. Nine sharp blades deliver the finest cutting pattern in this series—for a particularly well-groomed lawn.
Fits perfectly for your MOVA VIAX 250, among others
The 9-blade cutting disc fits perfectly for MOVA VIAX 250, VIAX 300 and VIAX 500. You can swap the mowing disc/blade plate unit easily, without any long tool drama—remove the old cutting disc, attach the new one, done.
From the box to the lawn in five minutes
The 9 blades work toward an even cutting pattern: the grass is cut more finely instead of simply being torn off. The more cutting edges work at the same time, the denser and more uniform the lawn looks. You get the cutting disc as a complete set for direct replacement—so your MOVA runs smoothly again. The swap on the fine-cut mowing disc is done in just a few minutes, completely without tools—simply remove the old disc, fit the new one.
Even wet grass doesn’t throw the disc off rhythm
With sharp cutting performance, the likelihood that grass will build up on the Mowing disc or cause a blockage is reduced. Otherwise, moist clippings tend to collect around the blades and slow down rotation—an overrunning mowing disc counteracts this purposefully. Result: reliable operation with consistent mowing performance—especially when the lawn is a bit denser. Your MOVA VIAX keeps its course calmly instead of fighting against resistance.
In summary
Top reviews
Installation facile sur mon MOVA VIAX 300. Les 9 lames coupent plus fin et le gazon est bien uniforme, malgré une légère odeur au premier usage.
The blades are sharp and the cutting report improved significantly. However, it came a bit too late for our season.
Swapped this 9-blade cutting disc on my MOVA VIAX 250 in about 15–20 minutes, using the existing screws. The extra cutting points do give a finer, more even cut, and it rotates smoothly without wobble. One minor thing: the underside needed a quick wipe before installation to clear leftover grit.
After trying two other brands, this 9-blade cutting disc for MOVA VIAX is a clear winner. The cutting quality is significantly better, and the grass looks more uniform than before. It fits perfectly, and the installation was simple. I appreciate the extra blades that provide a more thorough cut. A small downside was the packaging, which could have been more robust, but the product lives up to expectations.
funktioniert einwandfrei: nach dem wechsel auf die 9-klingen-messerscheibe für meinen Mova viax 250 ist der rasen deutlich gleichmäßiger, und die montage ging schnell. klippt sauber auch bei leichtem trockenem gras.
wymieniłem tę 9-klingen-messerscheibe w moim mova viax 500 po tym, jak stary talerz zaczął wibrować, i od razu było ciszej. trawnik wygląda równiej dzięki większej liczbie punktów cięcia, ale przy pierwszym koszeniu trzeba trochę dłużej poczekać, aż wszystko się „ułoży”.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What happens if I use the wrong blade disc for my MOVA VIAX 250?
A wrong or incompatible blade disc can lead to an imbalance that may damage the device. This can affect the motor performance and shorten the lifespan of your lawn mower robot. It is important that you use the 9-blade disc specifically for MOVA VIAX 250, 300, or 500 to avoid issues.
How long does shipping take for the CUT GUARD blade disc and can I return it?
Shipping of the CUT GUARD 9-blade disc usually takes 2-4 business days. If you are not satisfied with the product, you can return it within 30 days in unused condition. We want to ensure that you are completely satisfied with your purchase.
How do I know when to replace the blade disc for my MOVA VIAX 300?
A clear warning sign is an uneven cutting pattern or when the lawn mower robot no longer cuts the grass properly. If the blades are visibly worn or damaged, it is time to replace the 9-blade disc to maintain lawn quality.
Is the CUT GUARD blade disc compatible with all MOVA VIAX models?
Yes, the 9-blade disc from CUT GUARD is specifically designed for the MOVA VIAX 250, 300, and 500 models. Do not use this blade disc with other models, as this may lead to issues with fit and functionality.
How does the 9-blade cutting disc affect the battery life of my MOVA VIAX 500?
Using the CUT GUARD 9-blade cutting disc significantly improves the cutting pattern, leading to more efficient battery usage. A finer cutting pattern means that the lawn mower robot needs to recharge less often, which positively impacts battery life and the overall health of the lawn.