9-blade cutting disc for MOVA LiDAX 800, 1000, 1200 & 1600 – Precision mowing disc against grass blockages
- 9-blade cutting disc for MOVA LiDAX 800, 1000, 1200, and 1600 robotic mowers
- More cutting points for a finer cut and precise lawn care
- Reduces grass blockages at the cutting deck, especially in dense or slightly damp grass
- Suitable as a replacement cutting deck, blade disc, or cutting disc for compatible MOVA LiDAX models
- Durable solution for even blade rotation, maintenance, and reliable operation during the mowing season
incl. 7 blades
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ LiDAX 800
- ✓ LiDAX 1000
- ✓ LiDAX 1200
- ✓ LiDAX 1600
Whenever your MOVA LiDAX 800, 1000, 1200 or 1600 starts to struggle in the grass, this 9-blade cutting disc brings back speed and clean cuts.
A fresh-from-the-gardener cut every time
Dull blades tear the grass rather than cutting it—resulting in uneven cut edges and more work for the robotic mower. After some time, the original blades wear down, and the lawn looks frayed instead of well-groomed. With the 9-blade cutting disc for MOVA LiDAX 800, 1000, 1200 & 1600, you get more cutting power per revolution and stop typical grass blockages at the mowing disc before they become annoying. With nine cutting edges, this series achieves its finest cutting result.
Fits your MOVA LiDAX 800 and more exactly
The 9-blade cutting disc is compatible with MOVA LiDAX 800, LiDAX 1000, LiDAX 1200 and LiDAX 1600. The swap is quick: remove the old cutting disc, fit the new cutting disc—without any long tool-fiddling.
Everything you need for a quick swap
The 9 blades provide a finer cutting pattern because the grass is captured more evenly. The more cutting points work at the same time, the cleaner and denser the lawn becomes. You get the cutting disc as a complete replacement, so you don’t have to piece together individual parts. The swap on the precision mowing disc is done in just a few minutes—no tools required. Ideal for the start of the season or when the old blades start to wear out in the middle of the season.
For a freely running mowing disc
More cutting power means fewer “getting stuck”: The blade plate work stays more even, even when the grass is sometimes a bit denser. Otherwise, damp clippings build up around the blades and slow down rotation—sharp blades keep the flow of grass moving. This way, your MOVA LiDAX runs more reliably through the garden and you reduce blockages that slow down mowing operation. A quieter run and a consistently well-kept lawn.
The most important points
Top reviews
Arrived quickly and the disc fit my MOVA LiDAX 800 perfectly, with no annoying play. Cutting is cleaner and blocks are rarer on thicker grass, but the instructions could be clearer for first-time swaps.
I recently replaced my old cutting disc on my MOVA LiDAX 1200 and I immediately notice the difference! The nine blades provide a really nice cut, even in the slightly wetter lawn that I have. No more grass blockages, which is a great relief. I have a medium-sized garden, about 600 sqm, and this accessory seems to hold up well and works as promised. Very satisfied with the purchase!
Installed this 9-blade cutting disc on my MOVA LiDAX 1000 and it fits exactly—no wobble. The extra cutting points help with a finer cut, and I’ve noticed fewer grass clumps when the lawn is slightly damp. Only downside: the packaging didn’t include much guidance, so I had to rely on the old instructions.
Die 9-Klingen-Messerscheibe passt bei meinem MOVA LiDAX 1200 exakt auf den Mähteller, ohne Spiel. Der Austausch ging bei mir in rund 10–15 Minuten von der Hand, und die zusätzliche Schneidkante mit den Schrauben sitzt sauber, sodass weniger Grasblockaden entstehen, auch wenn das Gras nach dem Regen etwas feuchter ist. Peter
Past goed op mijn MOVA LiDAX 800 en maait nu veel fijner zonder grasblokkades. Fijne vervanging; de montage was snel.
The new 9-blade cutting disc for my MOVA LiDAX 1000 has exceeded my expectations! The lawn looks much finer cut, and I finally have no more grass blockages, even on my somewhat wet lawn. I have a garden of 800 sqm, and this blade makes the job so much easier. A small downside was the somewhat long delivery time, but the result is definitely worth it!
zamontowałem do mojego mOVA lidax 1000 w kilka minut, pasuje bez kombinowania. przy gęstszym trawniku jest mniej blokad i cięcie wygląda równiej.
Works well and cuts evenly. Noticed fewer grass blockages, but delivery took longer than expected.
Effective replacement to help me with quality mowing, but a bit expensive.
jeg købte 9-klingen-messerskiven til min mOVA lidax 1200, og den passer faktisk lige i, som den skal. græsset bliver klippet pænt og jævnt, og jeg har især færre små græsblokader når plænen lige er lidt fugtig. den eneste lille ting er, at den originale vejledning er lidt kort.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How quickly can I receive the 9-blade cutting disc for my MOVA LiDAX 1000?
The shipping of the 9-blade cutting disc for MOVA LiDAX 800, 1000, 1200, and 1600 usually takes place within 1-3 business days after the order is received. A straightforward return process is possible as long as the goods are unused and in their original condition.
What happens if I use an incompatible cutting disc for my MOVA LiDAX 1200?
If you mount the wrong cutting disc on your MOVA LiDAX 1200, it can cause an imbalance that may damage both the motor and the mowing system. This can significantly shorten the lifespan of your robotic mower.
What common problems occur when using the 9-blade cutting disc?
Users often report issues such as clogged blades when cutting wet grass or uneven cutting results when the blades are worn. Therefore, regular inspection and timely replacement of the cutting disc are recommended.
How does the 9-blade cutting disc affect the cutting pattern and lawn health?
Thanks to the additional cutting points of the 9-blade cutting disc, a finer cutting pattern is achieved, which promotes lawn health. Regular mowing with this disc reduces the stress on the lawn and ensures that it grows healthier and denser.
How do I change the 9-blade cutting disc on my MOVA LiDAX 1600?
Changing the 9-blade cutting disc is done in three steps: First, turn off the robotic mower and ensure it is disconnected from the power supply. Then, loosen the screws of the old disc with a suitable wrench and place the new disc on before tightening the screws again. The entire assembly usually takes about 10-15 minutes.