9-blade cutting disc compatible with Gardena Sileno Minimo – Fine-cut mowing plate & knife plate
- 9-blade cutting disc compatible with Gardena Sileno Minimo robotic mower
- More cutting points for a finer cut on small and well-maintained lawns
- Suitable as a mowing plate, knife plate, or replacement cutting disc for compatible Sileno Minimo models
- Supports smooth blade rotation and precise knife guidance during regular robotic lawnmower use
- Practical spare part for maintenance, replacement, and consistent mowing performance during the gardening season
incl. 9 blades
+
Compatibility – GARDENA
Fits the following robotic mowers:
- ✓ Sileno Minimo
At the latest when your GARDENA Sileno Minimo no longer cuts cleanly through the grass, this 9-blade cutting disc restores the right fine cut.
The first step back to a dense lawn
Dull blades tear the grass rather than cutting it cleanly—and you’ll notice that with every mowing cycle. Brown-tinted blade tips immediately show that the blades are no longer working properly. With the 9-blade cutting disc for GARDENA Sileno Minimo, you’ll get more cutting power back and a more even result—without having to tinker for a long time. Nine sharp blades deliver the finest cutting pattern in this series—for a particularly dense lawn.
Fits perfectly for your GARDENA Sileno Minimo
The 9-blade cutting disc is suitable for the GARDENA Sileno Minimo and sits exactly as intended for reliable operation. The swap is quick: remove the old cutting disc, fit the new one—tool effort stays to a minimum.
Swap without tools and without waiting
The 9 blades work for a finer cutting pattern on the mowing disc / blade plate and ensure the grass is cut more evenly. High cutting density, high thoroughness: the result looks flawless even up close. You receive the cutting disc as a complete replacement part so you can get started again right away. The replacement takes just a few minutes—completely without tools.
Grass clippings stand no chance here
More clean cuts mean less “tugging” and less risk of grass building up on the mowing disc. Damp mowing material is a rotational killer—sharp, freely running blades keep it moving out of the way continuously. That way, your GARDENA Sileno Minimo runs more smoothly and reliably again—even when the grass is a bit denser. Fewer stops and a consistently well-kept lawn.
What speaks for this set
Top reviews
Ik heb deze 9-klingen-messerschijf gekocht voor mijn Gardena Sileno Minimo, en op mijn kleine maar netjes bijgehouden gazon zie ik echt een gelijkmatiger snijbeeld. Het wisselen ging vlot en de schijf loopt volgens mij wat rustiger, met meer snijpunten per ronde. Wel vond ik dat hij bij de eerste montage iets nauwkeuriger uitgelijnd moest worden dan ik verwacht had, anders maakte hij kort wat extra geluid. Al met al tevreden, vooral voor regelmatig gebruik in de tuin.
wymieniłem na moim gardena sileno minimo i widać więcej punktów cięcia, trawa jest równo docięta. montaż jest prosty, a dysk trzyma się bez luzów, polecam.
Passt genau auf meinen Gardena Sileno Minimo und die 9 Klingen machen auf dem kleinen, gepflegten Rasen wirklich ein feineres Schnittbild. Wechsel war schnell und die Schüssel läuft seitdem ruhig.
Après avoir essayé deux autres marques, j’ai finalement opté pour cette 9-Klingen-Messerscheibe pour mon Gardena Sileno Minimo. L’ajustement est vraiment précis : j’ai dû juste vérifier l’alignement avant de serrer, et ensuite la rotation est restée stable, sans bruit particulier. Sur mon gazon plutôt petit et bien entretenu, la coupe paraît plus fine et plus régulière, y compris près des bordures. Le remplacement a été rapide et, pour l’instant, l’ensemble tient bien dans le temps.
ça coupe bien et laisse une pelouse plus nette, et le remplacement sur mon sileno minimo est simple. j’aurais juste aimé une notice plus claire.
works perfectly and provides an even cut. easy to replace.
Schnell angekommen og passen perfekt til min Gardena Sileno Minimo. Leveres frisk og skarp, og jeg kan se finere klipning på det småvoksne græs.
passt genau auf meinen gardena sileno minimo und macht auf dem kleinen rasen ein feineres schnittbild. beim einbau muss man die scheibe etwas sauber ausrichten, sonst läuft sie minimal lauter.
Swapped this 9-blade disc on my Gardena Sileno Minimo, and the cutting looks more even on our small lawn. Had to align it carefully; otherwise it made a little extra noise.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What common problems occur with the 9-blade cutting disc for the Gardena Sileno Minimo?
A common problem is the clogging of the blades in tall grass, which can impair the performance of the robotic mower. Additionally, improper installation can lead to imbalances that may damage the robotic mower.
How durable is the 9-blade cutting disc from CUT GUARD?
The 9-blade cutting disc is made of high-quality steel, which guarantees a long lifespan, especially with normal use on well-maintained lawns. With regular maintenance and care, it is possible to use it for several mowing seasons.
What are the differences between the 6-, 7-, and 9-blade variants of cutting discs for robotic mowers?
The 9-blade variant offers more cutting points than the 6- and 7-blade models, resulting in a cleaner cut on small, well-maintained lawns. For uneven or taller grass areas, the 6- or 7-blade models are more suitable as they are more robust.
How quickly will I receive the 9-blade cutting disc from CUT GUARD and can I return it?
The shipping of the 9-blade cutting disc usually occurs within 2-3 business days. If you are not satisfied with the product, you can return it within 14 days as long as it is unused and in the original packaging.
Is the 9-blade cutting disc compatible with other Gardena models?
This 9-blade cutting disc is specifically designed for the Gardena Sileno Minimo robotic mower. It is not compatible with other models, so you should ensure that your model is labeled Sileno Minimo before ordering the disc.