7-blade disc for Worx Landroid M500, M700, WR167E, WR141E, and Vision M600 with 7 blades and adapter
- 7-blade disc for Worx Landroid M500, M700, WR167E, WR141E, and Vision M600
- Ideal as a replacement blade disc for worn or damaged robotic mower blade discs
- With 7 blades for a clean, even lawn cut
- Includes adapter for proper mounting on the compatible Worx Landroid robotic mower
- Suitable for maintenance, repair, and preparation for the new mowing season
incl. 7 blades
+
Compatibility – WORX
Fits the following robotic mowers:
- ✓ Landroid M500
- ✓ Landroid M700
- ✓ Landroid WR167E
- ✓ Landroid WR141E
- ✓ Vision M600
Sharp 7 blades for your WORX Landroid bring clean cuts back again—so your lawn looks more even and the robot doesn’t have to fight unnecessarily.
Frayed lawn despite a robotic mower? That’s why
When the blades on the mowing disc become dull, they tear the grass rather than cutting it cleanly—and you’ll notice it right away in uneven, frayed cut edges. The lawn quickly looks unkempt and the tips start to turn slightly brown. With the 7 cutting disc for WORX Landroid M500, M700, WR167E, WR141E and Vision M600, you’re relying on fresh cutting performance and getting your robotic mower back in rhythm. Seven sharp blades provide more cutting points, a finer cut pattern, and a uniformly well-kept lawn. The matching adapter is already included, so the disc sits securely on your Landroid—no searching for extra parts, just swap it and get started.
Fits perfectly for your WORX Landroid M500 and more
The 7 cutting disc fits perfectly for WORX Landroid M500, M700, WR167E, WR141E as well as Vision M600. Switching on the mowing disc is quick: remove the old cutting disc, attach the new cutting disc—no fiddling with tools.
7 blades for a finer cutting pattern
The cutting disc comes with 7 blades for a finer cutting pattern with even distribution of cutting work. The package also includes the appropriate adapter so you can mount the cutting disc correctly right away.
Free grass flow instead of blockages
Dull blades often lead to grass clumping and tedious rework – with this cutting disc, your Landroid runs more reliably again. Damp clippings and dense turf are happy to build up over time around the blade plate and slow down blade rotation. A free-spinning mowing disc with sharp blades counteracts this effectively: the grass is guided cleanly onward instead of getting stuck. This helps you reduce blockages on the mowing disc, your WORX Landroid stays efficient even in denser growth, and it works noticeably more quietly. The difference is especially noticeable in everyday use after a few rainy days, when the grass grows back quickly.
Your benefits at a glance
Top reviews
fungerar perfekt på min worx landroid m700, bytte den gamla 7-klingars skivan och gräset ser jämnt klippt ut. enkel montering med adaptern.
Fantastic quality, easy to assemble and cuts perfectly. Highly recommended!
Die 7er Messerscheibe hat bei meinem Worx Landroid M700 gut gepasst; mit den Adapterteilen sitzt sie schnell und die 7 Klingen machen einen gleichmäßigen Schnitt. Der Austausch dauerte bei mir etwa 10–15 Minuten, allerdings musste ich beim Abschrauben der Befestigung etwas auf die richtige Reihenfolge achten.
No, and I can't believe how well this cutting disc works! I installed it in my WORX Landroid and the cutting is much cleaner. The only downside is the somewhat complicated instructions, but overall I highly recommend it!
J’ai remplacé la lame de mon Worx Landroid M500 qui commençait à accrocher, et cette 7er Messerscheibe est tombée parfaitement avec l’adaptateur fourni. Après montage, la pelouse de mon petit jardin de ville a été coupée de façon plus régulière dès le premier cycle, sans zones “hirsutes” comme avant. Le changement m’a pris une dizaine de minutes et, en suivant bien l’ordre des pièces, tout est allé très vite.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does shipping take for the 7-blade cutting disc for my Worx Landroid?
Shipping for the 7-blade cutting disc usually takes place within 2-3 business days after ordering. You can look forward to improved mowing performance quickly. Additionally, we offer a return within 30 days if the product does not meet your expectations.
Is the 7-blade cutting disc compatible with my Worx Landroid M500?
Yes, the 7-blade cutting disc is specifically designed for the Worx Landroid M500, M700, WR167E, WR141E, and Vision M600 models. You can be sure that it fits your device perfectly and ensures optimal mowing operation.
What are the differences between the 6, 7, and 9-blade cutting discs, and which one should I choose?
The 7-blade cutting disc is particularly well-suited for lawns up to 600 square meters and provides a clean cut. The 6-blade version can be used for smaller lawns, while the 9-blade disc is ideal for larger areas and dense grass types. Choose the 7-blade variant if you aim for a balanced mowing cut for medium-sized lawns.
How does the 7-blade cutting disc affect the battery life of my Worx lawn mower?
A high-quality 7-blade cutting disc ensures an even and clean cut, which increases the efficiency of your lawn mower. Less resistance while mowing means that the battery is less stressed, which can lead to longer battery life during mowing operations.
Are there advantages of the CUT GUARD blade disc compared to the original disc?
The CUT GUARD blade disc offers a cost-effective alternative to the original disc without compromising on quality. It is specifically designed for easy installation with an adapter and is ideal as a replacement part. The main disadvantage is that the lifespan may be shorter than that of the original parts, which should be considered with intensive use.