7-blade disc for Mammotion LUBA MINI AWD & LUBA Mini 2 AWD robotic lawnmower – Mowing disc & blade disc
- 7-blade cutting disc for Mammotion LUBA MINI AWD & LUBA Mini 2 AWD robotic lawnmower as a suitable replacement cutting plate
- For a clean lawn cut when the original cutting plate is worn or damaged
- Optimized for even blade rotation and reliable cutting performance in the garden
- Also known as cutting plate, blade plate, or cutting disc for robotic lawnmowers
- Practical spare part for maintaining the cutting system during the mowing season
incl. 7 blades
incl. 9 blades
Compatibility – Mammotion
Fits the following robotic mowers:
- ✓ LUBA MINI AWD
- ✓ LUBA Mini 2 AWD
Especially when your Mammotion LUBA MINI AWD or LUBA Mini 2 AWD no longer cuts cleanly through the grass, this 7-blade cutting disc brings speed back to your mowing.
When mowing takes longer than before
Dull blades tear up the grass rather than cutting it cleanly—exactly then the lawn quickly looks uneven. The blades are crushed instead of cut through, the tips discolour, and the lawn looks unkempt. With the 7-blade cutting disc for Mammotion LUBA MINI AWD & LUBA Mini 2 AWD, you get more cutting power per revolution and bring the cut pattern back under control. Seven sharp blades ensure an even, dense cut—noticeably different from the worn original.
Fits your Mammotion LUBA MINI AWD, among others
The 7-blade cutting disc fits perfectly for the Mammotion LUBA MINI AWD and LUBA Mini 2 AWD. You can swap the mowing disc or blade plate easily—without fiddling with tools for a long time—so your LUBA is ready for use again quickly.
From the box to the lawn in five minutes
The 7 blades ensure a more even cut and a finer cutting pattern, especially when the grass gets denser. More cutting edges grip the blades more precisely and leave a clean, uniform lawn. In the package, you get the complete cutting disc for your replacement—ready to be mounted on the mowing disc. The swap is done in just a few minutes and requires no tools: simply remove the old disc and attach the new one.
Even wet grass doesn’t throw the disc off rhythm
More blades mean less “pulling” on the grass: This helps reduce grass blockages on the mowing disc. Otherwise, damp clippings and dense lawns collect around the blades and slow down rotation—sharp, freely running blades keep the flow of grass moving. This way, your Mammotion LUBA MINI AWD or LUBA Mini 2 AWD runs more reliably and cuts cleanly even when lawn density changes—without constant checking.
In summary
Top reviews
This 7-klingen-messerscheibe works perfectly for my luba mini, cutting the grass evenly and quickly. Very satisfied with the quality!
Cette 7-Klingen-Messerscheibe correspond bien à mon Mammotion LUBA MINI AWD. Le montage est simple et la coupe est plus régulière, surtout après quelques semaines d’usage. Petite réserve: j’aurais aimé une notice plus claire pour le sens de montage.
Schnell geliefert, passt genau auf meinen LUBA MINI 2 AWD. Nach dem Tausch schneidet er wieder gleichmäßig, nur der erste Zusammenbau dauerte etwas.
Schnell geliefert och matchar min Mammotion LUBA Mini 2 AWD exakt. Efter bytet får gräset en jämn kant och inga konstiga vibrationer.
Deze 7-klingen-messenschijf past exact op mijn Mammotion LUBA MINI AWD en vervangt probleemloos de originele messenteller. Ik heb de oude los en de 7 snijbladen in de juiste volgorde gemonteerd; het duurde ongeveer 20-25 minuten en met de bijgeleverde schroeven draait alles weer strak en zonder trillingen. Laura
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I change the blade disc for my Mammotion LUBA MINI AWD lawn mower?
Changing the 7-blade disc is easy. First, you will need a wrench or a suitable screwdriver. Remove the old disc by loosening the screws and place the new blade disc on. Secure it with the screws and tighten them. The entire process takes about 10-15 minutes.
What are the advantages of the CUT GUARD blade disc compared to the original blade disc for the Mammotion LUBA MINI AWD?
The CUT GUARD blade disc offers better cutting performance due to advanced blade rotation and is made from durable material, which increases longevity. Compared to the original disc, it is often more cost-effective while still providing comparable or even improved performance.
How long does shipping of the CUT GUARD blade disc take and how does the return process work?
Shipping of the CUT GUARD blade disc usually takes place within 2-5 business days. If you are not satisfied with the product, you can return it within 14 days of receipt without giving any reason. Please note that the product must be unused and in its original packaging.
Is the CUT GUARD blade disc compatible with other models of Mammotion lawn mowers?
The CUT GUARD 7-blade cutting disc is specifically designed for the Mammotion LUBA MINI AWD robotic mower and may not be compatible with other models such as the LUBA MAX AWD or the LUBA MINI 4WD. Please check the model number of your robotic mower before purchasing.
What problems can arise if I use the wrong cutting disc for my robotic mower?
An incorrect or incompatible cutting disc can lead to imbalances, making the robotic mower unstable and potentially causing long-term damage to the motor or other components. Additionally, a wrong disc can result in an uneven cutting pattern, which can affect grass health.