7-blade disc compatible with ANTHBOT Genie 600, Genie 1000, Genie 3000, M5, M9, M5 Lidar
- 7-blade cutting disc compatible with ANTHBOT Genie 600, Genie 1000, and Genie 3000
- Also suitable for ANTHBOT M5, M9, M5 Lidar, and Pion 1000 in the standard version
- Suitable as a mowing plate, knife plate, or cutting disc for compatible ANTHBOT robotic mowers
- 7-blade design for precise blade guidance, smooth rotation, and even lawn cutting
- Important: For M5, M9, M5 Lidar, and Pion 1000, please use only the standard version
incl. 7 blades
incl. 9 blades
+
+
Compatibility – ANTHBOT
Fits the following robotic mowers:
- ✓ Genie 600
- ✓ Genie 1000
- ✓ Genie 3000
- ✓ M5
- ✓ M9
- ✓ M5 Lidar
If your ANTHBOT no longer cuts cleanly through the grass, the 7-blade cutting disc for Genie 600, Genie 1000, Genie 3000, M5, M9 and M5 Lidar is the quick boost back to an even cut.
From torn-up to well-groomed lawn
Dull blades tear the grass rather than cutting it—and then the robotic mower stops more often or works sluggishly. After a few weeks of use, the original blades lose their sharpness, the cut pattern becomes ragged, and the lawn quickly looks unkempt. This is exactly where this 7 cutting disc for ANTHBOT Genie comes in: it brings your robotic mower’s cutting performance back to the point. Seven sharp blades remove grass evenly, ensure clean cutting edges, and deliver a dense, well-groomed result. A small change that immediately provides a visibly better lawn for the Genie 600, Genie 1000, Genie 3000 as well as the models M5, M9 and M5 Lidar.
Fits perfectly for your ANTHBOT Genie 600 and more
The 7 cutting disc fits perfectly for ANTHBOT Genie 600, Genie 1000, Genie 3000, M5, M9 and M5 Lidar. You can swap it quickly on the mowing disc—no long tool drama—so your robot can get back to work fast.
Get started right away—without extra accessories
The 7 blades of this cutting disc cut noticeably cleaner and deliver a finer cutting pattern than a worn mowing disc with dull blades. More cutting points mean more contact with the grass—the blades cut the blades precisely instead of crushing them, and the lawn looks even and uniform up close. You receive the cutting disc as a complete set, so you don’t have to piece together individual parts. Unpack, attach, done—and your ANTHBOT Genie mows again as cleanly as at the beginning. Especially during the main season, when the lawn grows quickly, the difference is clearly noticeable.
Blockage-free all season long
With fresh cutting edges, the 7er-cutting disc reduces the typical grass blockages on the mowing disc. Damp clippings and dense lawns tend to build up over time around the blades and slow down the rotation—then the robot works sluggishly or even stops. A free-spinning mowing disc with sharp blades counteracts this: the grass is fed through cleanly instead of getting stuck. The result is reliable operation, less rework, and a mowing process that runs evenly—even when the grass is a bit thicker after a few rainy days. That way, your ANTHBOT Genie can make its rounds again without constant monitoring.
What makes this set stand out
Top reviews
passt auf meinen anthbot genie 600 genauso wie beschrieben, 7 messer laufen ruhig und der schnitt sieht gleichmäßig aus. kleine kritik: die schraubenaufnahme wirkt einen tick strammer, beim einbau braucht man etwas mehr geduld.
Den passer perfekt til min ANTHBOT Genie 1000. De 7 klinger giver et jævnt snit, og disken kører roligt uden unødige vibrationer. Jeg fik den rigtige standardversion, og udskiftningen tog under 10 minutter.
fits my anthbot genie 1000 perfectly and the 7 blades cut evenly with smooth rotation. quick swap from the old disc, no issues so far.
ingebouwde 7-klingen schijf past goed op mijn anthbot genie 3000; snijwerk is netjes en stil. enige minpunt: montage-instructie was wat summier.
Wymieniłem tarczę w moim ANTHBOT Genie 1000 i pasuje bez kombinowania. 7 ostrzy dobrze prowadzi trawę, a obrót jest wyraźnie cichszy niż na starym zestawie. Dostałem właściwą wersję do standardu i montaż poszedł szybko, bez luzów. Maria
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that the 7-blade disc for my ANTHBOT lawn mower needs to be replaced?
A replacement of the 7-blade disc is necessary when the lawn is cut unevenly or the blades are visibly damaged. An increase in noise during mowing can also indicate a worn disc.
How long does shipping take for my 7-blade disc for ANTHBOT?
Shipping of the 7-blade disc usually takes place within 1-3 business days. For returns, we offer a straightforward return option within 30 days, provided the product is unused.
What happens if I use an incompatible blade disc on my ANTHBOT lawn mower?
Using an incompatible blade disc can lead to imbalance, which may damage the lawn mower or reduce the lifespan of the motor. Additionally, the cutting pattern may suffer and become uneven.
How does the 7-blade disc affect the battery life of my ANTHBOT lawn mower?
A well-functioning 7-blade disc ensures an efficient mowing process, which extends battery life. A worn disc can cause the lawn mower to work harder, quickly draining the battery.
What is the difference between the 6-blade, 7-blade, and 9-blade variants for ANTHBOT lawn mowers?
The 7-blade disc offers a balanced combination of cutting quality and stability, while the 6-blade variant is ideal for softer lawns. The 9-blade version is better suited for tougher grass and denser terrain. The choice therefore depends heavily on the lawn condition.