7-blade cutting disc for Segway Navimow i208 AWD, i215 LiDAR & i220 LiDAR – Mowing disc with 7 blades
- 7-blade cutting disc for Segway Navimow i208 AWD, i215 LiDAR, and i220 LiDAR robotic mowers
- Mowing disc with 7 blades for controlled blade guidance and precise lawn cutting
- Suitable as a replacement cutting disc in case of wear, damaged cutting disc, or declining cutting quality
- Compatible with Navimow AWD and LiDAR models of the i-series
- Practical spare part for maintenance, replacement, and reliable lawn care during the season
incl. 7 blades
incl. 9 blades
+
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow i208 AWD
- ✓ Navimow i215 LiDAR
- ✓ Navimow i220 LiDAR
If your SEGWAY Navimow mows noticeably more slowly or the grass looks more “torn up,” the 7-blade cutting disc with 7 blades is exactly the quick fix for clean cuts again.
Frayed blades of grass? Time for fresh blades
Dull blades turn every mowing pass into a real chore: the grass is cut unevenly and the mowing disc has to work against resistance. This also puts strain on the motor, which has to push against blockages. With the 7 cutting disc for SEGWAY Navimow i208 AWD, i215 LiDAR & i220 LiDAR, you restore cutting performance—so your lawn looks evenly trimmed again and the robotic mower moves through efficiently. The seven-blade setup noticeably increases the cutting frequency—the result looks significantly finer.
Fits perfectly for your SEGWAY Navimow i208 AWD, among others
This 7er cutting disc fits exactly for SEGWAY Navimow i208 AWD, i215 LiDAR and i220 LiDAR. Changing the mowing disc is straightforward: remove the old cutting disc, put the new one on—no long tool fiddling.
The contents of the package: everything you need for the swap
The 7 blades ensure a finer cutting pattern and distribute the cut cleanly across the entire area. Additional cutting edges also catch blades of grass that individual blades would leave out—so you get a consistently clean result without gaps. You receive the cutting disc as a complete replacement—ready to install for your next mowing session. The swap on the mowing disc takes only a few minutes and works even without any technical know-how: remove the old disc, fit the new one, done.
More smooth running in the cutting system
With fresh cutting discs, the mowing disc reduces typical grass blockages at the mowing disc, because less “lubricating film” and less resistance are created. Otherwise, damp clippings tend to stick around the blades and slow down rotation—an idling mowing disc keeps the flow of grass moving. Result: reliable operation, an even cut, and fewer interruptions while mowing—even when the grass grows back denser after rainy days.
Everything Important at a Glance
Top reviews
Very satisfied with this cutting disc. Makes mowing much more efficient!
Der neue Mähteller sitzt bei meinem i215 LiDAR perfekt. Die 7 Klingen schneiden wieder sauber und gleichmäßig. Maria
Tarcza do mojego Segway Navimow i215 LiDAR pasuje bez problemu i po wymianie znów równo tnie. Jedyny minus: było trochę więcej papieru w paczce niż samego produktu i przesyłka przyszła z opóźnieniem.
Efter at have prøvet to andre brands til min Segway Navimow i215 LiDAR, var det her 7-klingers messerteller det mest præcise. Den gamle skive var begyndt at give ujævnt snit, men efter skiftet kører den igen roligt og græsset bliver klippet meget ensartet, også på lidt tættere områder. Jeg kunne montere den uden besvær, og pasformen sad, som den skulle. 5/5 samlet set.
the cutting disc works well, but delivery took longer than expected.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What are the advantages of the 7-blade disc from CUT GUARD compared to the original blade disc for my Segway Navimow i220 LiDAR?
The 7-blade disc from CUT GUARD offers improved blade guidance, resulting in a more precise lawn cut. Additionally, it is specifically designed for the i208 AWD, i215 LiDAR, and i220 LiDAR models, meaning it is optimally tailored to the requirements of these robotic mowers. Another advantage is the price-performance ratio: CUT GUARD offers comparable quality at often a lower price than the original.
What problems can arise if I use the wrong blade disc for my Navimow i215 LiDAR?
Using an incorrect or incompatible blade disc can lead to an imbalance that can significantly affect the robotic mower. Possible damage to the motor or drive unit are potential consequences that can lead to high repair costs. Therefore, it is important to use the 7-blade disc from CUT GUARD exclusively with the corresponding models of the Navimow series.
What common mistakes do users make when changing the blade disc on their Segway Navimow i208 AWD?
A common mistake is that users do not align the blades properly, which can lead to an uneven cut. Also, not paying attention to the correct torque settings for the screws is an issue that can affect the safety and functionality of the 7-blade disc. Additionally, it is often forgotten to remove the old sealing washer, which can also lead to problems.
How long does the shipping of the 7-blade disc from CUT GUARD take and what should I consider for a return?
The shipping of the 7-blade disc usually takes place within 2-3 business days after ordering. For returns, you have 30 days to send the product back in its original packaging. Make sure to include the purchase receipt to ensure a prompt processing of your return request.
How do I change the 7-blade disc on my Segway Navimow i220 LiDAR?
Changing the blade disc usually takes about 15-20 minutes. First, you will need a wrench and possibly a screwdriver. First, unscrew the old blade disc, then place the new 7-blade disc from CUT GUARD in the correct orientation and screw it on tightly. Make sure to align the blades correctly to achieve an optimal cutting pattern.