7-blade cutting disc for Segway Navimow i105E, i108E & i205 AWD – Robotic lawnmower cutting plate with 7 blades
- 7-blade cutting disc for Segway Navimow i105E, i108E and i205 AWD robotic lawnmower
- Cutting plate with 7 blades for precise blade guidance and even lawn cutting
- Suitable as a replacement cutting plate in case of wear, damaged cutting disc or reduced mowing performance
- Compatible with Navimow i-Series models including i205 AWD
- Practical spare part for maintenance, replacement, and reliable lawn care during the mowing season
incl. 7 blades
incl. 9 blades
+
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow i105E
- ✓ Navimow i108E
- ✓ Navimow i205 AWD
Whenever your SEGWAY Navimow no longer cuts cleanly through the grass, the 7-blade cutting disc for Navimow i105E, i108E & i205 AWD is the quick solution for getting an even cut again.
From torn-up to well-kept lawn
Dull blades tear the grass rather than cutting it cleanly—this is immediately visible in uneven cut edges. The blades discolor at the tips, and the robot needs longer for the same area. With the 7 cutting disc for SEGWAY Navimow i105E, i108E & i205 AWD, you restore your Navimow’s cutting performance and reduce everyday “getting stuck.” Seven sharp blades mean more cutting points and a finer result.
Fits your SEGWAY Navimow i105E, among others
The 7-series cutting disc is specifically designed for SEGWAY Navimow i105E, i108E, and i205 AWD. You can swap the cutting disc on the mowing disc quickly and easily—without a long tool ordeal—so your mowing operation can get going again fast.
Get started right away—without extra accessories
The 7 blades of the cutting disc provide a finer cutting pattern and consistent results across the entire area. The higher number of blades distributes the work better and ensures a carpet-like, even cut. You receive the cutting disc as a complete mowing disc replacement, so you don’t have to assemble individual parts. The swap takes only a few minutes and works even without technical know-how—unpack, attach, done.
Blockage-free all season long
With fresh cutting edges, the grass is less “squeezed” and gets caught in the cutting zone less often. Otherwise, damp clippings tend to stick around the blades and slow down the rotation—sharp blades keep the flow of grass moving. This way, your Navimow runs more reliably even when the grass is a bit denser—fewer blockages, more continuous mowing. A quieter operation and a consistently well-kept lawn.
What makes this set stand out
Top reviews
Schnell leveret og den passer til min Segway Navimow i108E uden problemer. Klippesættet med 7 klinger gav et mere jævnt resultat i løbet af en uge.
Wymieniałem tę 7er-Messerscheibe w moim Segway Navimow i108E po kilku intensywnych koszeniach na 300 m² trawnika. Od razu widać, że prowadzenie noży jest równomierniejsze i trawa po przejeździe wygląda dużo bardziej jednolicie, bez tych drobnych poszarpanych fragmentów, które pojawiały się wcześniej. Montaż poszedł sprawnie, pasuje bez kombinowania, a nowe krawędzie wyraźnie poprawiły efektywność. Jedyna drobna rzecz: warto mieć pod ręką klucz o dobrym chwycie, bo śruby lubią być trochę oporne.
Very happy with this 7-blade disc, it cuts the grass impeccably. Fast delivery and easy to install.
works as a replacement for my segway navimow i205 awd, and the 7 blades keep the cut even. easy swap once i matched the mounting, no surprises.
funktioniert grundsätzlich gut als ersatz für meinen navimow i108e, schnitthöhe passt. lieferung kam leider etwas später als erwartet.
werkt als vervanging voor mijn segway navimow i205 awd, de 7 messen zorgen voor een gelijkmatige snede. kleine tegenvaller: installatie duurde net iets langer dan verwacht.
Po dłuższym researchu dobrałem tę 7er-Messerscheibe do Segway Navimow i205 AWD i ostatecznie po dwóch innych markach to jest ten zestaw, który trzyma parametry. Widać równiej prowadzone cięcie: po pierwszym dniu pracy trawa wygląda dużo bardziej jednolicie, a w tygodniu nie pojawiły się „postrzępione” miejsca. Pasuje bez kombinacji, tylko wymiana wymaga chwili skupienia, bo trzeba dobrze ułożyć tarczę przed dokręceniem.
After trying two other brands, I can say that this 7-blade cutting disc really does the job with the Segway Navimow. The cutting result is even and efficient, which was exactly what I needed. One small criticism is that the installation was somewhat tricky at first, but once it was done, it worked perfectly. Recommended for those looking for a reliable replacement part.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What happens if I use an incompatible blade disc on my Segway Navimow i105E?
Using an incompatible blade disc can lead to an imbalance, which not only affects the mowing performance but can also cause damage to the lawn mower robot. This may result in additional repair costs and significantly shorten the lifespan of the device.
How do I change the 7-inch blade disc on my Segway Navimow i205 AWD?
Changing the blade disc is simple and requires only a wrench. First, turn off the lawn mower robot and remove the old disc by loosening the screws. Then, place the new 7-inch blade disc on and tighten the screws again. The entire process takes about 15 minutes.
What common problems occur when using the 7-inch blade disc with my Segway Navimow i108E?
A common problem is uneven cutting quality, often due to worn or damaged blades. Users also report reduced cutting performance if the mowing deck is not regularly maintained or replaced.
How long does shipping take for the 7-inch blade disc for my Segway Navimow and what should I consider for returns?
Shipping of the 7-inch blade disc usually takes place within 2-3 business days. If you are not satisfied with the product, we accept returns within 30 days. Please ensure that the disc is returned unused and in its original packaging.
Is the 7-inch blade disc compatible with other models of the Segway Navimow series?
Yes, the 7-inch blade disc is specifically designed for the Segway Navimow i105E, i108E, and i205 AWD models. Please use this disc only with the mentioned models to achieve optimal results.