7-Blade Cutting Disc for MOVA VIAX 250, 300 & 500 Robotic Lawnmowers – Precision Mowing Disc & Blade Plate
- 7-Blade Cutting Disc for MOVA VIAX 250, 300 and 500 Robotic Lawnmowers
- Precision Mowing Disc for even blade guidance and clean cutting results
- Suitable as a replacement blade plate when the original cutting disc is worn or damaged
- Ideal for compact and medium-sized lawns with regular robotic lawnmower maintenance
- Relevant spare part for maintenance, replacement, and consistently reliable mowing performance
incl. 7 blades
incl. 9 blades
+
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ VIAX 250
- ✓ VIAX 300
- ✓ VIAX 500
Sharp 7-blade cutting disc for MOVA – so your VIAX 250, 300 or 500 cuts cleanly through the grass again, instead of pulling and tearing.
From torn-up to well-kept lawn
When the blades become dull, the grass doesn’t just “stand there” longer – it’s cut unevenly and the mowing disc works against resistance. The lawn then looks frayed, and the robot needs longer for the same area. This is exactly where the 7-blade cutting disc for MOVA VIAX 250, 300 & 500 helps: it restores fresh cutting performance and ensures an even result on your lawn. Seven sharp blades mean more cutting points and a finer cutting pattern.
Fits your MOVA VIAX 250, among others
The 7-blade cutting disc fits exactly the MOVA VIAX 250, VIAX 300 and VIAX 500 models. The swap is quick: remove the old cutting disc, attach the new mowing disc/blade plate unit—without any long tool-fiddling.
Get started right away—no extra accessories
With 7 blades, you get a finer cutting pattern because the grass is “caught” more often and cut cleanly. The additional cutting edges ensure that every blade of grass is picked up more thoroughly—resulting in an evenly dense area. You get the right cutting disc for your MOVA VIAX—ready for direct installation as a replacement for your worn cutting attachment. The swap on the precision mowing disc takes only a few minutes and works entirely without tools.
Unblocked all season long
More sharpness means less stress for the mowing disc: This reduces typical grass blockages and prevents clippings from building up unnecessarily. Especially in damp or dense grass, material otherwise collects around the blades and slows down rotation. This way, your MOVA VIAX 250, 300 or 500 runs reliably and evenly over the area again—with fewer interruptions and a calmer mowing pattern.
What makes this set stand out
Top reviews
After trying two other brands, I picked this 7-blade cutting disc for my MOVA VIAX 300 and I’m glad I did. It bolted on cleanly without any shimming, and the mowing result is noticeably more even—especially along the edges where my old disc started leaving uneven strands. I also liked that it arrived with the hardware look-alike parts aligned well, so replacement took about 15–20 minutes. For the price, it’s reliable and well made.
ik heb de 7-klingen-messerschijf gekocht voor mijn mova viax 300, omdat de oude messenhouder na een paar maanden flink begon te rafelen bij de randen. deze vervanging paste precies en het maaien ging meteen weer strakker en gelijkmatiger over mijn ongeveer 250 m². echt fijn dat je hem zonder gedoe kunt monteren.
Die 7-Klingen-Messerscheibe für meinen MOVA VIAX 250 passt exakt und war bei mir nach dem Tausch mit den vorhandenen Schrauben in etwa 15–20 Minuten erledigt. Seitdem schneidet er deutlich gleichmäßiger, ohne dieses Zerren an den Randbereichen—passt einfach zu der gleichmäßigen Messerführung.
zamówiłam 7-klingen-messerscheibe do mojego mova viax 250 i pasuje bez kombinowania, wymiana zajęła mi około 15 minut. po założeniu trawa jest równo docięta, ale czuć, że przy pierwszym montażu trzeba uważnie ustawić tarczę, bo inaczej wibruje na postoju.
Jeg købte 7-Klingen-Messerscheibe til min MOVA VIAX 500, fordi den gamle skive begyndte at hakke i kanterne efter et par sæsoner. Den passede fint, og jeg fik den skiftet på cirka 20 minutter uden værktøjssjov—jeg kører ellers med den på en mellemstor græsplæne på omkring 250 m². Klipningen blev mere jævn, og der var færre ujævne striber. Jeg giver kun 4 stjerner, fordi jeg lige skulle justere placeringen en smule for at få den helt i balance.
The 7-blade cutting disc for my robotic lawnmower MOVA VIAX 300 has really made a difference. The installation was simple, taking about 15 minutes, and the results are impeccable with clean cuts. Very satisfied with this accessory!
Efter att ha provat två andra märken till min MOVA VIAX 500 märkte jag att den här 7-klingers knivtallriken ger ett jämnare klipp och mindre “rivning” i kanterna. Den passade direkt på min befintliga fästanordning och bytet gick smidigt, ungefär 15 minuter. Jag ger ändå 4 av 5 eftersom förpackningen saknade tydliga momentbilder, så man får vara noga första gången med hur skivans läge ska sitta.
Tę 7-klingową tarczę kupiłem do MOVA VIAX 300, bo stara była wytarta i zostawiała poszarpane brzegi. Wymiana zajęła mi około 20 minut, pasowanie bez kombinowania, a po pierwszym koszeniu trawa wygląda dużo równo. Jedyny minus: trzeba uważać przy dociąganiu śrub, inaczej krawędź lekko drży.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How durable is the 7-blade cutting disc for MOVA VIAX 250, 300, and 500 compared to other models?
The 7-blade cutting disc for MOVA VIAX 250, 300, and 500 is made of high-quality steel that is not only robust but also corrosion-resistant. With regular maintenance and use, it should last several mowing seasons, making it a durable choice.
Are there common issues with the cutting disc on the MOVA VIAX 250, 300, and 500 robotic mowers?
Users often report an uneven cutting pattern when the blades of the cutting disc are worn or not properly mounted. Additionally, improper installation can lead to vibrations that may damage the device.
What happens if I attach an incompatible cutting disc to my MOVA VIAX robotic mower?
Using an incompatible cutting disc can cause imbalance, significantly affecting the performance of the robotic mower. This could not only reduce cutting quality but also cause mechanical damage to the motor or other parts.
Is the 7-blade cutting disc compatible with all MOVA VIAX models?
The 7-blade cutting disc is specifically designed for the MOVA VIAX 250, 300, and 500 models. It is not suitable for other models, such as MOVA VIAX 100 or 400.
How quickly will the cutting disc be delivered, and can I return it if it doesn't fit?
The delivery of the 7-blade cutting disc usually takes place within 3-5 business days. If you find that the disc is not compatible with your robotic mower, you can return it within 30 days as long as it is unused.