7-blade cutting disc for MOVA LiDAX 800, 1000, 1200 & 1600 – Mowing disc against grass blockages
- 7-blade cutting disc for MOVA LiDAX 800, 1000, 1200 and 1600 robotic lawnmowers
- Reduces grass blockages at the mowing disc and supports a smoother operation of the cutting system
- 7-blade design for precise blade guidance and an even lawn cut
- Suitable as a replacement mowing disc, blade disc, or cutting disc in case of wear
- Durable solution for maintenance, replacement, and reliable lawn care with MOVA LiDAX
incl. 7 blades
incl. 9 blades
+
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ LiDAX 800
- ✓ LiDAX 1000
- ✓ LiDAX 1200
- ✓ LiDAX 1600
Especially when your MOVA LiDAX 800/1000/1200/1600 suddenly cuts more slowly, the 7-blade cutting disc gets your mowing back up to speed—without any long trial and error.
Dull blades are easy to spot by the lawn
Dull blades tear the grass rather than cutting it cleanly – not only does that look uneven, it also slows down your robotic mower. The motor has to work against the resistance, which costs runtime and energy. With the 7-blade cutting disc for MOVA LiDAX 800, 1000, 1200 & 1600, you ensure that the mowing disc grips properly again and the grass is processed reliably. Seven fresh blades restore a clean, even cutting pattern – for a visibly better-kept lawn.
Fits your MOVA LiDAX 800 and more perfectly
The 7-blade cutting disc is compatible with MOVA LiDAX 800, LiDAX 1000, LiDAX 1200 and LiDAX 1600. You can replace it on the mowing disc quickly—without complicated adjustments or tool marathons.
Complete set for a direct swap
The 7 blades deliver a finer cutting pattern because more cutting edges work at the same time. The blades cut the grass stems precisely instead of crushing them—resulting in a denser, more even lawn. You get the cutting disc as a complete replacement for your mowing disc—ready for direct installation. The conversion is intentionally kept simple—remove the old disc, fit the new one, and keep mowing. No additional accessories, no tools required.
Grass blockages? Not with fresh blades
Cleaner cuts mean fewer chances of grass clogs on the mowing disc. Otherwise, damp clippings and dense turf stick around the blades and slow down rotation—an idling mowing disc with sharp blades helps prevent this. This way, your MOVA LiDAX runs smoothly again instead of repeatedly getting stuck in wet or dense grass. Fewer interruptions, less rework, and a calm mowing operation.
Quick summary
Top reviews
J’ai remplacé le disque de coupe sur ma MOVA LiDAX 1000 par cette 7-klingen-Messerscheibe. Ça a bien réduit les blocages d’herbe au niveau du carter, et le montage est resté simple avec les 7 lames. Petite réserve: l’ajustement des vis demande un peu de patience pour que tout soit bien centré.
This new cutting blade has really made a difference in my garden! I have a large lawn of about 500 square meters and I noticed that after replacing it, my robotic mower handles average grass blockages much better. The use of 7 blades ensures an even and precise cut, so I can enjoy a beautiful lawn without unnecessary problems. I definitely recommend it to anyone who has a MOVA LiDAX model!
Jeg købte 7-klingen-Messerscheiben til min MOVA LiDAX 1200, fordi den ofte stod og bandt græs ved de tykkere partier. Efter skiftet kører den meget mere jævnt, og jeg oplever mindre ophobning på selve mådtallerkenen, også når haven er lidt våd. Det føles solide i kvalitet, og udskiftningen tog ikke lang tid. Jeg kan også se et pænere snit i min cirka 300 m² have, hvilket virkelig gør en forskel.
Ich habe die 7-Klingen-Messerscheibe für meine MOVA LiDAX 1600 nach ein paar Wochen Nutzung bei dichtem Gras gewechselt. Seitdem hat der Mäher deutlich weniger Grasblockaden am Mähteller und der Schnitt wirkt gleichmäßiger. Montage ging bei mir schnell, nur die Reinigung vor dem Einbau lohnt sich.
passade 1:1 på min MOVA LiDAX 1600 och minskade gräsblockaderna direkt, även i högt gräs. känns solid och hållbar efter några veckors körning.
worked great on my MOVA LiDAX 1000; less grass buildup on the cutting deck and smoother passes in thick patches. the 7 blades feel well made and easy to swap out.
Installed the 7-blade cutting disc on my MOVA LiDAX 1000 and it really helped with the grass clumps that used to jam the deck. The blade count and the alignment with the existing screws made it straightforward; I had it swapped in about 20 minutes. One small drawback: the old cutting edge was much easier to remove, so the first loosening took longer than expected.
passede fint på min Mova lidax 1200 og gav færre græsblokader i de lidt tættere områder; 7 klinger ser solidt ud. jeg gav den lige lidt længere tid i starten end forventet, fordi skruerne skulle sidde helt rigtigt.
Na de aankoop heb ik gecontroleerd of het echt voor de MOVA LiDAX 800/1000/1200/1600 bedoeld was, en dat klopt: de 7-klingen schijf pastte 1-op-1 op mijn LiDAX 1200. Na het proberen van twee andere brands merkte ik wel minder grasophoping bij dichte plekken, maar niet zo drastisch als gehoopt. Wat me minder beviel was de verpakking; de schijf zat wel stevig, maar ik moest alsnog wat rommelige vulling weghalen voordat ik alles kon monteren.
Schnell geliefert, die Messerscheibe passt 1:1 auf meinen MOVA LiDAX 800. Seit dem Wechsel habe ich deutlich weniger Grasblockaden und der Schnitt wirkt gleichmäßiger.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How can I tell that the 7-blade cutting disc for my MOVA LiDAX 800 needs to be replaced?
A sign that the cutting disc should be replaced is an uneven cut of the lawn. If the robotic mower frequently has grass blockages or the blades are visibly worn, it is time for a replacement. An unusually high noise level during mowing can also indicate wear on the disc.
How durable is the 7-blade cutting disc for MOVA LiDAX 1200 and what material is it made of?
The 7-blade cutting disc for the MOVA LiDAX 1200 is made of high-strength steel, which increases its durability and resistance to wear. With normal use, the disc can last several seasons, but it also heavily depends on mowing conditions such as grass density and moisture.
Are there differences between the original and the CUT GUARD retrofit disc for MOVA LiDAX 1000?
Yes, the CUT GUARD retrofit disc often offers a better price-performance ratio than the original. It is specifically designed for improved cutting performance and fewer grass blockages, while the original disc may be more expensive and does not always provide the same performance.
How does the 7-blade cutting disc affect the battery life of my MOVA LiDAX 1600 and the health of the lawn?
A well-functioning 7-blade cutting disc for the MOVA LiDAX 1600 ensures a more precise cut, optimizing battery life as the robot operates efficiently. Additionally, an even cut contributes to the health of the lawn by promoting growth and reducing the risk of diseases.
What happens if I attach an incompatible cutting disc to my MOVA LiDAX 800?
Installing an incompatible cutting disc can lead to imbalance, which can damage the lawn mower robot. This can not only reduce the lifespan of the device but also negatively affect cutting performance, leading to an uneven mowing pattern and potentially causing further damage to the device.