7-blade cutting disc compatible with TerraMow S800, S1200, V600 & V1000 – Cutting disc & mowing disc
- 7-blade cutting disc compatible with TerraMow S800, S1200, V600, and V1000 robotic mowers
- Suitable as a cutting disc, mowing plate, or knife plate for compatible TerraMow models
- 7-blade design for precise blade guidance and even cutting distribution
- Supports quiet blade rotation during regular lawn maintenance on various garden areas
- Practical replacement part for wear, damaged mowing plate, or declining mowing performance
incl. 6 blades
incl. 9 blades
+
+
Compatibility – TERRAMOW
Fits the following robotic mowers:
- ✓ S800
- ✓ S1200
- ✓ V600
- ✓ V1000
More cut per revolution: With the 7-blade cutting disc from TERRAMOW, your TerraMow S800, S1200, V600 or V1000 will cut cleanly through the grass again instead of pulling at it.
A fresh-cut look again, just like from the gardener
When the blades become dull, the grass doesn’t simply “stay standing” — it’s cut unevenly and the mowing robot works noticeably harder. Discolored grass tips give the entire lawn an unkempt gray haze. This is exactly where the 7-blade cutting disc for TerraMow S800, S1200, V600 & V1000 helps: new cutting edges restore a fresh cut and ensure even mowing across your area. Seven sharp blades mean more cutting points and a finer result.
Fits perfectly for your TERRAMOW S800 and more
This cutting disc is compatible with TERRAMOW TerraMow S800, S1200, V600 and V1000. Swapping it on the mowing disc is quick and easy—you don’t need any tool drama: simply remove the old cutting disc, fit the new cutting disc.
Everything included for a quick swap
The 7-blade cutting disc delivers a finer cutting pattern because the blades capture the grass blades more evenly. The additional cutting edges also catch blades that a single blade would miss—so you get a consistently clean look. You receive the cutting disc as a complete mowing disc replacement—ready to install so your robot can mow again in its usual rhythm. The swap takes only a few minutes and can be done without tools.
For a freely running mowing disc
With sharp blades, the cutting disc reduces the typical grass blockages on the mowing disc that quickly occur with dull blade plates. Wet grass clippings like to wrap around the cutting area and slow things down—fresh blades keep everything running smoothly. Result: reliable operation, fewer interruptions, and a mowing process that keeps going—even when the grass is a bit denser.
The most important points
Top reviews
Swapped this 7-blade cutting disc on my TerraMow S1200 and it went on without any wobble. Installation took me about 20 minutes, keeping track of the 3 screws, and the blade rotation feels noticeably smoother—especially on the slightly thicker patches near the fence.
7-klingede messerskive passade bra till min terramow s800, och efter bytet klippte den jämnare i hörnen. jag gav bara fyra stjärnor eftersom skruvhylsan i paketet saknade tydlig märkning.
After trying two other brands, I noticed this 7-Klingen-Messerscheibe is the one that fits my TerraMow V1000 without any wackeln. Die Klingen sind sauber verarbeitet, und das Schnittbild wirkt nach ein paar Durchläufen wieder gleichmäßiger, besonders bei etwas dichterem Gras. Ich ziehe einen Punkt ab, weil die Guide zum Tausch bei meinem Modell nicht ganz eindeutig war und ich erst kurz nachjustieren musste. Insgesamt aber ein verlässlicher Ersatz, wenn die alte Scheibe langsamer dreht.
de 7-klingen-messerschijf paste precies op mijn terramow v1000 en ik merkte meteen dat het gras weer mooi egaal wordt. ik had ‘m besteld omdat de oude messen wat slomer begonnen te draaien, en na het wisselen draait hij weer lekker rustig. aanrader als je onderhoud doet op een wat ruigere tuin!
po wymianie na tę 7-klingową tarczę w moim terramow s1200 koszenie znowu wygląda równo, a robot chodzi wyraźnie ciszej. na mojej rabatce przy krawędzi trawnika mniej zostawia ścinek, wygląda to jak powinno. jedyna rzecz: przy pierwszym montażu śruby trzeba było porządnie dociągnąć, ale potem już ok.
Wymieniłem u siebie na TerraMow V600 i pasuje bez luzów. Po montażu trawa cięta jest równiej, ale do zestawu przydałaby się czytelniejsza instrukcja.
Den 7-klingede messerskive passede direkte på min TerraMow S1200 uden slør, og jeg kunne skifte den på ca. 20 minutter ved at holde styr på de 3 skruer. Klingenes rotation blev mærkbart roligere, og græsset ser mere jævnt skåret ud efter et par kørsler. Stabilt erstatningspart, når den gamle starter at føles langsom.
Mon TerraMow V1000 tond désormais plus régulièrement depuis le remplacement de la lame, et la coupe est bien répartie grâce aux 7 klingen. J’ai mis environ 15-20 minutes à la monter en respectant les 4 vis, et elle tourne sans vibration malgré les passages près des bordures.
works fine on my terramow s800, and the 7 blades make the cut look even across the lawn. only one thing: the screws felt a bit tight on first install.
pasuje do terramow v600, po wymianie działa równiej i ciszej niż stara tarcza. przy montażu śruby trzeba było mocniej dosiąść.
Ich habe die 7-Klingen-Messerscheibe für meinen TerraMow S1200 bestellt, weil die Mähleistung nach dem langen Sommerurlaub nachgelassen hat. Auf meinem ca. 200-m²-Garten läuft das Teil jetzt wieder ruhig und die Schnitte wirken gleichmäßiger, auch wenn der Roboter öfter um die Beete herum fährt. Montage ging bei mir schnell (die 7-Klingen sitzen sauber), und nach dem ersten Durchlauf war kein Wackeln oder Klappern zu hören. Klare 5 stars von mir!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What problems occur if I do not install the CUT GUARD blade disc correctly on my EUFY E15 lawn mower?
Incorrect installation of the CUT GUARD blade disc can lead to uneven blade rotation, resulting in a jerky cut and irregular mowing results. Additionally, the mowing disc may come loose and cause damage to the lawn mower.
What happens if I combine the CUT GUARD blade disc with an incompatible blade disc?
Using an incompatible blade disc can create imbalances that overload the motor of your EUFY E15 or E18. This can not only shorten the lifespan of the lawn mower but also lead to serious damage to the internal components.
How does the CUT GUARD blade disc affect the cutting pattern and lawn health on my EUFY E18?
The CUT GUARD blade disc with 6 blades ensures a clean cut, promoting lawn health. A uniform cut prevents the grass from tearing or turning brown, which can lead to poor appearance and unhealthy lawn areas if the wrong blades are chosen.
How durable are the blades of the CUT GUARD blade disc for EUFY E15 and EUFY E18?
The blades of the CUT GUARD blade disc are made from high-quality material, ensuring a long lifespan. With regular use, the blades should be replaced every 2-3 months to maintain optimal mowing performance.
What are the differences between the 6 blades of the CUT GUARD blade disc and other blade variants for lawn mowers?
The 6 blades of the CUT GUARD blade disc are ideal for medium to large lawns, as they provide good cutting performance. In comparison, 7 or 9 blades offer more intensive processing for fine grasses, which is advantageous for densely grown lawns.