5-blade cutting disc compatible with EUFY C15 – robotic lawnmower mowing disc & blade plate
- 5x cutting disc compatible with EUFY C15 robotic lawnmower
- Suitable as mowing disc, blade plate, or cutting disc for compatible EUFY C15 models
- 5-blade setup for precise blade guidance and an even lawn cut
- Supports quiet blade rotation with regular lawn care in the garden
- Practical spare part for maintenance, replacement, and reliable mowing performance during the season
incl. 6 blades
incl. 7 blades
+
+
Compatibility – EUFY
Fits the following robotic mowers:
- ✓ C15
As soon as the EUFY C15 noticeably loses performance with every cut, the 5-blade cutting disc is exactly the quick boost for clean cuts again.
So EUFY cuts cleanly again
Dull blades tear the grass rather than cutting it—resulting in uneven edges and a lawn that quickly looks “torn up.” As soon as the original setup becomes dull, the lawn visibly loses freshness and density. With the 5 cutting disc for EUFY C15, you restore cutting performance and put an end to constant re-cutting. Five sharp blades ensure a clean, even cutting pattern.
Fits your EUFY C15 perfectly
The 5 cutting disc is made for the EUFY C15 and sits exactly as needed for smooth operation. You swap it without any tool drama: remove the old cutting disc, attach the new one—done.
Ready from the very first minute
The 5 blades ensure a more even cutting pattern, so your Mowing disc doesn’t just mow “somehow,” but works cleanly. A sharp cut separates cleanly; a dull one crushes— the difference shows in the density of the lawn. The package includes the 5-blade cutting disc for your EUFY C15—ready for installation. The swap takes just a few minutes and completely without tools: remove the old disc, fit the new one, done.
Uninterrupted mowing even in dense growth
Sharp blades reduce grass clogs at the mowing disc, because the cut material is picked up cleanly and processed further. Otherwise, damp material sticks around the blades and slows down rotation—an overrunning mowing disc keeps the flow of grass moving. This helps your EUFY C15 run more reliably during mowing—even when the grass is a bit thicker. Fewer stops, less rework, and a consistently well-kept lawn.
Key details at a glance
Top reviews
Die 5er-Messerscheibe passt auf meinen EUFY C15 einwandfrei; ich musste die Schrauben nur wie gewohnt übernehmen. Der Wechsel hat bei mir rund 15 Minuten gedauert, und die 5-Klingen drehen gleichmäßig, ohne spürbare Vibrationen. Nach der ersten Runde sah der Rasenschnitt sehr sauber aus.
Installed this 5-blade cutting disc on my EUFY C15 in about 10 minutes, using the existing screws. It lines up well and the grass looks evenly cut after a run. One minor downside: the edges seem slightly sharper than my old set, so I’m being extra careful while swapping it.
fits my eufy c15 well and the 5-blade setup keeps the cut looking even; i just wish it felt a touch less stiff than the original.
Den passer på min EUFY C15. Skiftet tog cirka 15 minutter, og klipningen blev jævn, men klingen lugter lidt metal efter montering.
Passede til min EUFY C15, og installationen tog under 10 minutter. Jeg synes dog klingen føles lidt stivere end originalen efter første brug.
Werkt prima op mijn EUFY C15. De 5- Klingen schijf past goed en snijdt netjes en gelijkmatig, ook na een paar dagen droog weer. Ik heb hem als vervanging gebruikt en hij draait rustig zonder rare trillingen. Sophie
funkade bra till min eufy c15, bytte mähtallriken och fick igång den på typ 10-12 minuter utan strul. klippningen blev jämnare och den låter lite lugnare än innan, men jag tyckte att bladen känns lite väl vassa när man ska hantera dem.
Wymieniłem oryginalny mâhteller w moim EUFY C15 na tę 5er-Messerscheibe i pasuje dokładnie do mocowania. Montaż zajął mi ok. 15 minut, a po wkręceniu wszystkich śrub kosiarka pracuje równiej i bez niepotrzebnych drgań. Cięcie jest równe, a 5-klingowy układ dobrze prowadzi trawę między cyklem.
montée sur mon eufy c15 en une dizaine de minutes, en réutilisant mes vis. la tonte est régulière grâce aux 5 lames et ça ne vibre pas, même après plusieurs cycles!
Pasuje do EUFY C15 bez problemu. Po wymianie widać równy cięty trawnik i prawie brak wibracji.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that the cutting disc of my EUFY C15 mowing robot needs to be replaced?
There are several signs that indicate the cutting disc should be replaced. These include an uneven lawn cut, visible damage to the blade guide, or an increased noise level during mowing. If the mowing robot no longer works efficiently or the blades no longer rotate properly, it’s time for a replacement.
How long does the 5-blade cutting disc for the EUFY C15 last, and what material is it made of?
The 5-blade cutting disc is made from high-quality, durable steel, which ensures a long service life and excellent cutting performance. With regular maintenance and proper handling, the disc can last for several seasons, depending on mowing conditions and the condition of the lawn.
What is the difference between the 5-blade, 6-blade, and 7-blade blade variants for the EUFY C15 mowing robot?
The 5-blade cutting disc is specially designed for the EUFY C15 and provides balanced performance for typical lawn areas. The 6-blade and 7-blade blade variants are suitable for larger areas or denser grass, as they offer higher cutting performance. For a normal garden, the 5-blade version is recommended, while larger gardens may benefit from the additional blades.
Is the 5-blade cutting disc compatible with the exact model numbers of the EUFY C15?
Yes, the 5-blade cutting disc is specially designed for the EUFY C15 robotic lawnmower. The exact model number it is compatible with is EUFY C15. Please check before purchasing that your lawnmower has this model number to ensure the disc fits.
What about shipping and returns for the cutting disc?
We offer fast shipping and deliver the 5-blade cutting disc within 2-3 business days after ordering. If you are not satisfied with the product, you can return it within 30 days, provided it is unused and in its original packaging. Your satisfaction is important to us!