2x cutting disc compatible with DREAME A3 AWD 2000 & 3500 PRO – mowing disc with guard and 6 blades
- 2x cutting disc compatible with DREAME A3 AWD 2000 and 3500 PRO robotic lawnmowers
- Mowing disc set with guard and 6 blades for maintenance, replacement, and reliable lawn care
- Suitable as a mowing disc, cutting disc, or replacement cutting disc for compatible DREAME A3 AWD models
- Supports stable blade guidance, smooth blade rotation, and an even lawn cut
- Practical 2-pack for maintaining the cutting system throughout the garden season
incl. 6 blades
+
Compatibility – DREAME
Fits the following robotic mowers:
- ✓ A3 AWD 2000
- ✓ A3 AWD 3500 PRO
Sharp cuts instead of tough lawn leftovers: With 2x cutting disc for DREAME A3 AWD 2000 & 3500 PRO, you’ll get your mowing disc back up to speed.
If DREAME only tears the grass instead of cutting it
When the blades become dull, the DREAME tears rather than cleanly cutting— the grass quickly looks uneven and the robot needs longer. After some time, the original blades lose their sharpness and put extra strain on the motor. This is exactly where these cutting discs for DREAME A3 AWD 2000 & 3500 PRO help: they replace worn mowing disc components and ensure a clean cutting performance again. With the 2-pack, you have replacement for both sides right away or a spare ready.
Fits perfectly for your DREAME A3 AWD 2000 and more
The cutting discs are compatible with DREAME A3 AWD 2000 and A3 AWD 3500 PRO. You can swap them easily on the mowing disc—no tool hassle—so your robot is ready for use again quickly.
Delivered ready to install
Each cutting disc comes with 6 blades for a finer cutting pattern. Sharp edges leave smooth cut surfaces that heal faster—your lawn stays healthy and dense. In the set, you get 2x cutting disc—ideal if you want to renew both sides right away or plan ahead for longer. Swapping on the mowing disc takes just a few minutes and requires no tools: remove the old disc, attach the new one, done.
Less grass clogging, more power
With fresh blades on the mowing disc, you cut the grass more evenly and reduce typical blockages caused by tough cutting debris. Sticky clippings are the most common reason for a tired disc—sharp cutting edges prevent it from sticking in the first place. Result: reliable operation, fewer interruptions, and a DREAME that works cleanly through the lawn again. Fewer stops and a consistently well-maintained lawn.
The most important points at a glance
Top reviews
Efter att ha testat två andra märken till min Dreame A3 AWD 2000, provade jag dessa 2x messerskivor. De passade okej och skyddet runt knivdelen känns som att den håller bättre i vardagsanvändning, men jag fick ändå justera/montera en kniv lite mer noggrant än väntat för att den skulle ligga helt plant. Snitten blir jämna nog, men logistiskt kom de i en ganska tunn förpackning.
Zamówiłam 2x Messerscheibe do mojego DREAME A3 AWD 3500 PRO i pasują bez kombinowania. Każdy talerz ma 6 klingen, a osłona pomaga utrzymać stabilny tor ruchu; montaż z wymianą śrub zajął mi około 15 minut. Cięcie jest równiejowe niż na starych elementach i pracuje ciszej, bez nieprzyjemnych wibracji.
Past exact op mijn DREAME A3 AWD 2000. De set met 6 messen per messerteller en de beschermring ging vlot; ik was ongeveer 20 minuten kwijt met ombouwen. Kleine minpunt: bij de eerste start voelde ik lichte trilling, maar na opnieuw uitlijnen lag alles weer strak en maait hij weer gelijkmatiger.
After trying two other brands for my DREAME A3 AWD 3500 PRO, these 2x replacement mower discs were the best fit. The set arrived with the protective ring and 6 blades per disc, and the installation felt straightforward without forcing anything. I noticed a quieter, more stable blade rotation and a more even cut across the lawn, especially on slightly rougher edges. For maintenance, having two sets means I can swap during the season without downtime.
Past exact op mijn DREAME A3 AWD 2000/3500 PRO; per schijf zitten 6 messen en ik kon de beschermring hergebruiken zonder gedoe. Installeren kostte me ongeveer 15-20 minuten, met een paar schroeven netjes terugplaatsen, en de snede oogt gelijkmatiger. Kleine minpunt: de messen waren wel scherp, maar ik moest ze zorgvuldig uitlijnen om geen trilling te krijgen.
passede perfekt til min dreame a3 awd 3500 pro, og det var nemt at skifte. de 6 klinger giver et pænt og jævnt snit uden unødig lyd.
Ça se monte bien sur ma Dreame A3 AWD 3500 PRO. Le capot de protection et les 6 lames par plateau font une coupe plus régulière.
passt genau für meine dreame a3 awd 3500 pro, mit schutzring und 6 klingen. macht was es soll, ruhiger lauf und gleichmäßiger schnitt.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What are common problems with the cutting discs of the DREAME A3 AWD 2000 and 3500 PRO?
A common problem with the cutting discs of the DREAME A3 AWD 2000 and 3500 PRO is imbalance, which can occur if the discs are not mounted correctly or are worn. This can lead to an uneven cut and increased wear of the mowing robot. Another problem is clogging of the blades by grass clippings, which impairs efficiency.
What are the pros and cons of CUT GUARD cutting discs compared to original parts?
CUT GUARD cutting discs offer the advantage of a cost-effective alternative to original parts, while still providing good cutting quality. However, they may differ from the original parts of the DREAME A3 AWD 2000 and 3500 PRO in terms of durability and material quality. Original parts often guarantee an excellent fit and performance, while aftermarket parts sometimes require adjustments.
How long does shipping for the CUT GUARD cutting discs take and how does returns work?
Shipping for the CUT GUARD cutting discs is typically processed within 2-3 business days after ordering. If you are not satisfied with the cutting discs, you can return them within 30 days as long as they are unused and in their original packaging. This provides an extra confidence boost for your purchase decision.
What happens if I use an incompatible cutting disc for my DREAME A3 AWD 2000 or 3500 PRO?
Using an incompatible cutting disc can lead to significant imbalance, which can cause damage to the robotic lawnmower, such as excessive wear of the motors or even a malfunction. It is crucial to choose the right CUT GUARD disc to ensure consistent performance and safety.
How do I know that the cutting discs of my DREAME A3 AWD 2000 or 3500 PRO need to be replaced?
A clear sign that the cutting discs need to be replaced is an uneven cutting pattern and a noticeable reduction in cutting performance while mowing. Also, increased clogging of the blades with grass and a louder operation of the robotic lawnmower can be indicators that the blades as well as the cutting disc are worn.