2x 7-blade cutting disc compatible with DREAME A3 AWD 2000 & 3500 PRO – precision mowing disc
- 2x 7-blade cutting disc compatible with DREAME A3 AWD 2000 and 3500 PRO mowing robots
- Precision mowing disc set for compatible DREAME A3 AWD models with two cutting units
- 7-blade design for even cutting distribution and precise lawn cutting
- Suitable as mowing disc, blade plate, or cutting disc for maintenance and replacement
- Supports quiet blade rotation and stable blade guidance during regular lawn care
incl. 6 blades
incl. 9 blades
+
+
Compatibility – DREAME
Fits the following robotic mowers:
- ✓ A3 AWD 2000
- ✓ A3 AWD 3500 PRO
Sharp 7-blade cutting discs from DREAME bring your DREAME A3 AWD 2000 & 3500 PRO back to a clean cut—so the mowing disc doesn’t have to “fight” against dull grass.
Frayed lawn despite a robotic mower? That’s why
If your lawn suddenly looks uneven or the mower robot slows down more often, it’s usually due to dull blades: the grass is no longer cut cleanly, but rather “torn.” After some time, the original blades lose their sharpness. With this 2x 7-blade cutting disc for DREAME A3 AWD 2000 & 3500 PRO, you restore cutting performance and give your A3 AWD the power it needs for even mowing paths. As a 2-pack, you have replacement blades ready or a reserve for the next season.
Fits perfectly for your DREAME A3 AWD 2000, among others
The 7-blade cutting disc fits perfectly for DREAME A3 AWD 2000 and A3 AWD 3500 PRO. Swapping it on the mowing disc is quick and easy—no fiddling with tools—so you can get back to mowing right away.
One set, one handle, done
The 7 blades provide a finer cutting pattern and help ensure the grass is cut evenly. More blade contact per revolution means: fewer missed blades, more uniformity. You get 2x cutting disc / mowing disc insert—ideal if you want to swap it right away or keep a spare for the next season. The swap on the precision mowing disc can be done in just a few minutes and completely without tools.
Free grass flow instead of blockages
With fresh cutting edges, the tendency for grass blockages on the mowing disc is significantly reduced. Without sharp blades, damp grass wraps around the cutting zone; with them, rotation stays consistent. Result: reliable operation, fewer interruptions, and a DREAME A3 AWD that keeps going consistently. Fewer stops, less rework, and a neatly maintained lawn.
Your benefits at a glance
Top reviews
Założyłam te 2x 7-Klingen-Messerscheibe do DREAME A3 AWD 2000 i trafiły dokładnie na miejsce bez kombinowania. Trawnik ok. 600 m² kosi równo, nawet przy krawędziach, a po wymianie nie pojawiły się nieprzyjemne wibracje. Jedyny minus to konieczność bardzo dokładnego dokręcenia przed startem.
Passade till min DREAME A3 AWD 3500 PRO utan strul. Gräset klipps jämnare, och de 7 klingorna märks direkt efter bytet.
J’ai installé ces 2x 7-Klingen-Messerscheibe sur mon DREAME A3 AWD 2000 et je les sens tout de suite plus réguliers : la tonte sur mon jardin d’environ 500 m² est plus propre, surtout autour des zones un peu denses. Les disques remplacent bien les anciens, et j’ai apprécié le fait que ça ne demande pas de bricolage compliqué. En revanche, il faut être minutieux au remontage pour que tout tourne bien sans vibration légère. Globalement, c’est un bon remplacement qui dure.
Schnell angekommen, and the fit for my DREAME A3 AWD 2000 was spot on. The 7 blades cut more evenly and there’s less vibration than with the old discs.
installerede 2x 7-klingen-messerskiverne på min dreame a3 awd 3500 pro, og græsset bliver mere jævnt. nem montering uden ekstra værktøj, virker uden vibration!
het setje van 2x past precies op mijn dreame a3 awd 3500 pro, en het 7-klingen ontwerp geeft een nettere snijverdeler. ik moest wel even goed kijken of alles stevig vast zat, anders hoorde ik wat extra geluid bij het opstarten.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What are common problems with the cutting discs of the DREAME A3 AWD 2000 and 3500 PRO?
A common problem with the cutting discs of the DREAME A3 AWD 2000 and 3500 PRO is imbalance, which can occur if the discs are not mounted correctly or are worn out. This can lead to an uneven cut and increased wear of the mowing robot. Another issue is clogging of the blades by grass clippings, which reduces efficiency.
What are the pros and cons of CUT GUARD cutting discs compared to original parts?
CUT GUARD cutting discs offer the advantage of a cost-effective alternative to original parts, while still providing good cutting quality. However, they may differ from the original parts of the DREAME A3 AWD 2000 and 3500 PRO in terms of longevity and material quality. Original parts often guarantee an excellent fit and performance, while aftermarket parts sometimes require adjustments.
How long does shipping for the CUT GUARD cutting discs take and how does the return work?
Shipping for the CUT GUARD cutting discs usually takes place within 2-3 business days after ordering. If you are not satisfied with the cutting discs, you can return them within 30 days as long as they are unused and in the original packaging. This provides an extra boost of confidence in your purchase decision.
What happens if I use an incompatible cutting disc for my DREAME A3 AWD 2000 or 3500 PRO?
Using an incompatible cutting disc can lead to significant imbalance, which can cause damage to the robotic lawnmower, such as excessive wear of the motors or even a malfunction. It is crucial to choose the right CUT GUARD disc to ensure consistent performance and safety.
How do I know that the cutting discs of my DREAME A3 AWD 2000 or 3500 PRO need to be replaced?
A clear sign that the cutting discs need to be replaced is an uneven cut pattern and a noticeable reduction in cutting performance while mowing. Also, increased clogging of the blades with grass and a louder operation of the robotic lawnmower can be indicators that the blades as well as the cutting disc are worn out.