2-piece set of 7-blade cutting discs for Mammotion LUBA 1 AWD & LUBA 2 AWD – Robotic lawnmower cutting plate & knife plate
- 2-piece set of 7-blade cutting discs for Mammotion LUBA 1 AWD and LUBA 2 AWD robotic lawnmowers
- Suitable as a replacement cutting disc or blade disc in case of wear, damage, or reduced cutting performance
- With a 7-blade design for a clean, precise, and even lawn cut
- Durable and safe solution for maintenance, replacement, and care of the cutting system
- Practical set for robotic lawnmowers with two cutting areas – ideal for preparing for the mowing season
incl. 7 blades
incl. 9 blades
+
+
Compatibility – Mammotion
Fits the following robotic mowers:
- ✓ LUBA 1 AWD
- ✓ LUBA 2 AWD
Sharp edges instead of tough lawn strips: with the 2-pack 7-blade cutting disc for Mammotion LUBA 1 AWD & LUBA 2 AWD, you’ll get a clean cut again—relieving your robotic mower noticeably.
So Mammotion cuts cleanly again
When the blades become dull, the Mammotion LUBA tears up the grass rather than cutting it cleanly—resulting in uneven mowing paths and more rework. Dull blades also put extra strain on the motor, because it has to work against the resistance. This is exactly where the right cutting disc comes in: it restores cutting performance and ensures that your LUBA mows again “smoothly” and evenly. As a 2-pack, you have replacement blades right on hand—ideal for two swaps or as a spare.
Fits your Mammotion LUBA 1 AWD, etc.
The 2-pack 7-blade cutting disc fits perfectly for Mammotion LUBA 1 AWD and LUBA 2 AWD. You can swap the mowing disc/blade plate quickly and without any fiddling with tools—ideal if you want to get back to mowing right away.
Ready to go from the very first minute
The 7 blades provide a finer cutting pattern and distribute the cut more evenly across the area. More cutting points per revolution mean cleanerly severed blades and a denser, well-groomed lawn. The package includes 2 cutting discs—so you’re ready to use immediately or can keep one disc as a spare. Swapping the mowing disc takes only a few minutes and works even without any technical know-how. Unpack, attach, done.
Tangle-free mowing even in dense growth
With fresh cutting edges, the tendency for grass blockages on the mowing disc is significantly reduced. Otherwise, damp clippings and dense lawns collect around the blades and slow down rotation. This helps your Mammotion LUBA 1 AWD & LUBA 2 AWD to pull through reliably—even when the grass is a bit thicker. Fewer interruptions, less rework, and a robot that completes its rounds calmly and evenly.
Key details at a glance
Top reviews
ik heb dit 2er setje voor mijn mammotion luba 2 awd gekocht nadat de snit na een paar weken iets minder strak werd. het wisselen ging echt soepel (bijna 20 minuten), en na de eerste maaibeurt zag het gras er weer mooi en gelijkmatig uit, met die 7-klingen set blijft het snijvlak ook netjes.
aangemeld omdat mijn luba 2 awd na een seizoen iets minder strak knipte; met dit 2er set van 7-klingen-messerschijven ziet het gras weer gelijkmatig en schoon eruit. wisselen duurde bij mij ongeveer 10 minuten en alles paste precies.
works perfectly on my mammotion luba 1 awd, swap took about 10 minutes and the 7 blades cut evenly again. blades also arrived well protected in the set.
j’ai remplacé la lame sur ma mammotion luba 1 awd dès que la coupe est devenue moins nette. en changeant les 2 disques, j’ai retrouvé un rendu régulier, et le montage m’a pris une quinzaine de minutes.
Kupiłem ten 2er zestaw do mojego Mammotion LUBA 2 AWD, bo po kilku tygodniach koszenia trawa zaczęła wyglądać mniej równo. Wymiana była dla mnie prosta, cały proces zajął około kwadransa, a nowe 7-klingowe tarcze dały bardzo równy, czysty efekt na moich mniej więcej 600 m² ogrodu. Teraz kręci się stabilnie, a krawędzie tnące wyglądają solidnie, więc nie muszę co chwilę kombinować z ustawieniami.
The 7-blade cutting discs are a great addition for my Mammotion LUBA 1 AWD. The replacement was easy and took only about 10 minutes with the included screws. The lawn looks very well-maintained again!
Köpte de här två 7-klingade skivorna till min Mammotion LUBA 1 AWD när klippningen började bli lite ojämn. Bytet gick ganska smidigt och tog kanske 15 minuter, och efteråt såg gräset jämnare ut. Jag drog ändå åt fästena en extra gång efter första körningen, så jag ger 3 av 5.
Après avoir essayé deux autres marques, j’ai finalement opté pour ce set de deux disques à 7 lames pour mon Mammotion LUBA 1 AWD. Le montage est clair et j’ai pu faire l’échange en une dizaine de minutes, avec des lames qui retrouvent un gazon plus net et plus uniforme, surtout sur les zones où la coupe était devenue irrégulière. Une petite réserve : après la première semaine, j’ai dû vérifier le serrage car une lame avait un léger jeu.
The 7-blade messerskiver is a good choice for my Mammotion LUBA 2 AWD. Installation was quick and only took about 15 minutes with the included screws. Fortunately, they provided good cutting performance, but they could have been a bit sharper from the start.
werkt goed voor mijn mammotion luba 2 awd: na het wisselen (ongeveer 15 min) knipt mijn gazon weer mooi en gelijkmatig. de onderdelen zaten wel krap verpakt, en ik moest even geduldig de oude delen losmaken.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Which mower robot models are compatible with the CUT GUARD 7-blade cutting disc?
The CUT GUARD 7-blade cutting disc is specifically designed for the Mammotion LUBA 1 AWD and LUBA 2 AWD mower robots. These models require a precise cut, and with this cutting disc, you are optimally equipped.
How do I know that the blades of my Mammotion LUBA 1 AWD or LUBA 2 AWD need to be replaced?
A clear sign that the blades need to be replaced is an uneven cutting edge or when the grass is no longer cut cleanly. Visible damage or signs of wear on the blades can also indicate that replacement is necessary.
How does using new CUT GUARD cutting discs affect battery life and lawn health?
New CUT GUARD cutting discs significantly improve the cutting quality, leading to a healthier lawn. With the precise cut, the mower robot can operate more efficiently, optimizing battery life as less energy is needed for mowing.
How long does shipping of the CUT GUARD cutting discs take, and can I return them easily?
Shipping of the CUT GUARD cutting discs usually takes place within 2-3 business days. If you are not satisfied with the product, you can easily return it within 30 days for a refund.
What happens if I use an incompatible cutting disc for my mower robot?
Using an incompatible cutting disc can lead to an imbalance of the mower robot, which can cause severe damage to the device. This negatively affects the cutting performance and the lifespan of your mower robot.