Cutting disc for Dreame A1, A1 Pro and A2 robotic lawnmowers
- Cutting disc for Dreame A1, A1 Pro and A2 robotic lawnmowers – one mount, three models
- Three variants to choose from: 6, 7 or 9 blades – from factory condition to fine-cut
- Protective frame with every variant – guides the blades and reduces grass blockages
- Blades pre-assembled, tool-free replacement – ready to mow again in two minutes
- Optional as a set with 60 replacement blades – stock for the whole season
+
+
+
Compatibility – DREAME
Fits the following robotic mowers:
- ✓ A1
- ✓ A1 Pro
- ✓ A2
Your Dreame uses LiDAR navigation to mow straight paths across the lawn – how clean these paths look is determined by the cutting disc. Here you will find the right replacement mowing disc for A1, A1 Pro and A2: with 6, 7 or 9 blades, each variant with protective frame and ready to install.
6, 7 or 9 blades – find the right disc
All three versions fit identically on A1, A1 Pro and A2 and use the same protective frame. The difference is the number of cuts per revolution: more blades hit each blade of grass more often – the result is finer.
The blade plate your Dreame was delivered with. If you were happy with the cut pattern of the new robotic lawnmower and simply want to replace the worn disc, you can get it here – install it and keep going like on day one.
One more cut per revolution, noticeable with thick growth: the lanes look more densely cut without the robotic lawnmower having to drive more often. The middle path for everyone who wants more than the factory setting.
Nine blades break up the cuttings so finely that they disappear between the blades of grass – ideal for mulching and for lawn areas that should look as if they were cut with nail clippers after every run.
Clean mowing lines are only possible with sharp blades
Dreame A1, A1 Pro and A2 do not mow crosswise, but with LiDAR navigation in precise, parallel lines. That is exactly what dull blades make so visible: where a chaotic mower’s mistakes blur, Dreame shows every weakness of the cutting system line by line in the lawn.
Frayed, brownish blade tips, individual blades left standing in the track, a cut pattern that only looks right after the second pass – these are the typical signs that the problem is not the robotic lawnmower, but the cutting disc and blades having already seen their best days.
A fresh cutting disc restores the condition you bought the robotic lawnmower for: the blades separate every blade of grass cleanly, the cut edges stay green, and the lines look as if they were drawn.
The disc is delivered fully equipped and fits the original mounting of all three models – without adapters, without drilling, and without any adjustment work.
Protective frame and tool-free swapping
Unlike many other robotic lawnmowers, each variant of this cutting disc on the Dreame comes with a protective frame – regardless of whether it has 6, 7 or 9 blades. It guides the freely swinging blades in a controlled manner and prevents clippings from building up between the disc and the housing, slowing down the rotation.
The swap requires not a single screwdriver: remove the old disc, fit the new one, done. What used to be annual maintenance becomes a matter of two minutes – put on gloves, switch off the robotic lawnmower, replace.
It’s worth it even during the year: After a summer with fallen fruit, branches, or hidden toys in the grass, a quick look at the disc is all it takes. If a blade is stuck or the disc has a knock, replace it in the same time it takes to recharge the robotic lawnmower.
For winter, it’s simple: clean the disc, check it for cracks, and store it dry – then the Dreame starts into the new season in spring without any surprises.
Simply select the desired number of blades above – 6, 7 or 9; if you like, you can also get it as a set with 60 replacement blades. Each variant fits Dreame A1, A1 Pro and A2 and is delivered ready to install.
Top reviews
After testing two other brands, I decided on this Messerscheibe for my Dreame A1 robotic lawnmower. The product met my expectations, providing an even cut of the lawn thanks to its excellent design and high-quality blades. Additionally, the protection system works really effectively, reducing the risk of damage when mowing in more challenging areas. I definitely recommend it to anyone looking for a reliable replacement.
The blade disc for Dreame A1 worked well, but the installation took longer than I expected. It included six screws, which was a bit overwhelming, but I appreciated that the rotation of the blades was smooth and efficient. The delivery time was also longer than promised.
I’ve been using this cutting disc for my Dreame A2 Pro for a few weeks now, and it really delivers a clean lawn cut. The part with the guard feels stable, and the 6 blades run evenly without the jerking I had before. Installation was also straightforward—everything fit right away.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Frequently asked questions
Does the cutting disc really fit all three models – A1, A1 Pro and A2?
Yes. Dreame uses the same mowing disc mount for the A1, A1 Pro and A2, so every version of this disc fits each of the three lawn mowers without adapters or modifications. Even if you switch to a later model within the series, you can continue to use replacement discs and blades.
Which version should I choose – 6, 7 or 9 blades?
The 6-blade version matches the factory configuration and is the classic 1:1 replacement. With 7 blades, each blade of grass is cut once more per rotation—useful for dense, vigorous growth. The 9-blade version provides the finest cut and the best mulching performance. Mechanically, all three versions fit identically.
Do all three versions have the protective frame?
Yes—unlike some other robotic lawn mowers, Dreame includes a protective frame with every version (6, 7 and 9 blades). It supports the freely swinging blades and prevents cut grass from building up on the disc and slowing down the rotation.
Do I need tools for the replacement?
No. The cutting disc is replaced on the Dreame without a screwdriver: switch off the robot, carefully tilt it, remove the old disc, and attach the new one. Since the blades are already pre-assembled, the entire swap takes only a few minutes.
Are the blades included in the package and already mounted?
Yes. Each disc comes fully fitted—on the 6-blade version with 6, on the 7-blade version with 7, and on the 9-blade version with 9 pre-assembled blades. You don’t need to screw anything on individually; the disc is ready to use straight out of the packaging.
How can I tell if my current disc is worn out?
Typical signs include frayed, brownish blade tips, individual blades that remain standing in the mowing lanes, or a cutting system that runs unevenly. Since the Dreame mows along precise LiDAR paths, dull blades quickly become noticeable in the strip pattern. After contact with stones or branches, you should also check the disc for notches and deformation.
When is the set with 60 replacement blades worth it?
Whenever the robot runs regularly. The A1, A1 Pro, and A2 typically work through their mowing schedule several times per week—accordingly, the blades become dull regularly. With the 60-blade set, you’ll have supplies for the entire season at home and pay less per set than if you buy individual replacements later.
Is this an original Dreame replacement part?
No, it’s a compatible cutting disc from CUT GUARD. It is manufactured to fit precisely for the mounting of the Dreame A1, A1 Pro, and A2 and is designed for continuous operation in the mowing robot—an alternative to the original part stored in the EU, available quickly, and with pre-assembled blades.