9-blade cutting disc compatible with TERRAMOW S800, S1200, V600 & V1000 – Precision mowing disc
- 9-blade cutting disc compatible with TERRAMOW S800, S1200, V600, and V1000 robotic mowers
- Precision mowing disc with more cutting points for a finer and more even cut
- Suitable as a knife disc, cutting disc, or replacement cutting disc for compatible TERRAMOW models
- Supports quiet blade rotation and stable knife guidance during regular lawn care
- Practical spare part for maintenance, replacement, and reliable mowing performance during the gardening season
incl. 9 blades
+
Compatibility – TERRAMOW
Fits the following robotic mowers:
- ✓ S800
- ✓ S1200
- ✓ V600
- ✓ V1000
As soon as your TERRAMOW S800, S1200, V600 or V1000 no longer cuts cleanly, this 9-blade cutting disc brings back speed and a consistent cutting pattern.
Why the lawn suddenly looks unkempt
Dull blades tear the grass rather than cutting it – you’ll notice it right away, and you’ll also feel it in the runtime of your mowing robot. The longer the old blades run, the rougher the cut pattern becomes – from well-groomed to quickly unkempt. With the 9-blade cutting disc for TERRAMOW S800, S1200, V600 & V1000, you ensure that the mowing disc grips properly again and processes the grass cleanly. With nine cutting edges, this series achieves its finest cutting result.
Fits your TERRAMOW S800 and more perfectly
The 9-blade cutting disc is compatible with TERRAMOW S800, S1200, V600 and V1000. The swap on the mowing disc is quick: remove the old cutting disc, attach the new cutting disc—without a long hassle with tools.
Ready for use in just a few minutes
The 9 blades provide a finer cutting pattern because the grass is captured more evenly. The more cutting points work at the same time, the denser and more uniform the lawn looks. You get the cutting disc as a complete replacement, so you don’t have to piece together individual parts. The swap on the precision mowing disc is done in just a few minutes—completely without tools—ideal for the start of the season or when the blades start to wear down.
No more getting stuck in dense grass
With sharp blades, the risk is reduced that grass gets “caught” on the mowing disc and causes blockages. Especially after rain, clippings collect around the blades and cost cutting speed; sharp blades keep the path clear. This helps your TERRAMOW run more reliably even when the grass is a bit denser. Fewer stops, less rework, and a consistently well-kept lawn.
That’s why the switch is worth it
Top reviews
deze 9-klingen-messerscheibe past perfect op mijn terramow v1000, en het maait echt gelijkmatiger. ik ben blij met de stevige klemmen en snelle montage!
Installed the 9-blade disc on my TERRAMOW S1200 and it was a direct swap. The cut looks more even now, and the blades spin quietly without wobble. Worth it for regular upkeep when the old one starts to dull.
Schnell geliefert, die 9-Klingen-Scheibe passt exakt auf meinen TERRAMOW V1000. Nach dem Tausch wirkt der Schnittbild deutlich gleichmäßiger.
Quick delivery and it fits my TERRAMOW S800 as expected. One small downside: the packaging didn’t protect the center area from minor scuffs.
works well with my terramow s800 and the 9 blades give a more even cut; fit was slightly tight on first install.
Jeg har købt den 9-Klingen-Messerscheibe til min TERRAMOW S1200, og den sidder godt uden at skulle finde ekstra adaptere. Udskiftningen tog cirka 15-20 minutter, og de ni skærekanter giver et pænere og mere jævnt snit. Jeg gav 4/5, fordi den medfølgende vejledning kun dækker selve monteringen kort.
wymieniałam tę 9-klingową tarczę w moim terramow s800, pasuje bez kombinowania i po montażu trawnik wygląda równo. śruby siedzą stabilnie, a wymiana zajęła mi około 20 minut.
Die 9-Klingen-Messerscheibe passt auf meinen TERRAMOW V600, die Befestigung rastet sauber ein. Das Schnittbild ist gleichmäßiger, und die Klingen laufen ruhig. Ein kleiner Kritikpunkt: Beim ersten Wechsel braucht man etwas Geduld, bis alles wirklich fluchtet.
snel gemonteerd op mijn terramow s1200 en het maaibeeld is meteen veel gelijkmatiger dankzij de 9 klingen. draait rustig en blijft stevig zitten.
la 9-klingen-messerscheibe s’adapte parfaitement à mon terramow s1200, et la coupe est plus régulière. remplacement rapide, fait exactement le job.
Köpte den 9-klingiga skivan till min Terramow V600. Den ger jämnare snitt än min gamla, men passformen i mitten krävde lite justering.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What problems occur if I do not mount the CUT GUARD blade disc correctly on my EUFY E15 lawn mower?
Incorrect mounting of the CUT GUARD blade disc can lead to uneven blade rotation, resulting in a jerky cut and irregular mowing results. Additionally, the mowing disc may come loose and cause damage to the lawn mower.
What happens if I combine the CUT GUARD blade disc with an incompatible blade disc?
Using an incompatible blade disc can create imbalances that overload the motor of your EUFY E15 or E18. This can not only shorten the lifespan of the lawn mower but also lead to serious damage to the internal components.
How does the CUT GUARD blade disc affect the cutting pattern and lawn health on my EUFY E18?
The CUT GUARD blade disc with 6 blades ensures a clean cut, promoting lawn health. An even cut prevents the grass from tearing or turning brown, which can lead to poor appearance and unhealthy lawn areas if the wrong blades are chosen.
How durable are the blades of the CUT GUARD blade disc for EUFY E15 and EUFY E18?
The blades of the CUT GUARD blade disc are made from high-quality material, ensuring a long lifespan. With regular use, the blades should be replaced every 2-3 months to maintain optimal mowing performance.
What are the differences between the 6 blades of the CUT GUARD blade disc and other blade variants for lawn mowers?
The 6 blades of the CUT GUARD blade disc are ideal for medium to large lawns, as they provide good cutting performance. In comparison, 7 or 9 blades offer more intensive processing for fine grasses, which is advantageous for densely vegetated lawns.