7-blade cutting disc for Segway Navimow H-Series H500E, H800E & H1500E – Mowing disc with 7 blades
- 7-blade cutting disc for Segway Navimow H-Series H500E, H800E, and H1500E robotic mowers
- Mowing disc with 7 blades for precise blade guidance and even lawn cutting
- Suitable as a replacement cutting disc in case of wear, damaged cutting disc, or declining cutting quality
- Compatible with Navimow H models for maintenance of the cutting system
- Practical spare part for replacement, seasonal maintenance, and reliable mowing performance
incl. 7 blades
incl. 9 blades
+
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow H500E
- ✓ Navimow H800E
- ✓ Navimow H1500E
More clean cuts instead of tough blades: With the 7-blade cutting disc from SEGWAY for Navimow H500E, H800E & H1500E, your mowing disc is back to running properly.
The first step back to a dense lawn
When the blades become dull, the grass doesn’t stay “short and evenly cut” — it’s more likely to be torn, and the Navimow needs longer. Brown edges appear at the tips — a clear sign that the blades are crushing the blades of grass instead of cutting them. This is exactly where the 7 cutting disc for SEGWAY Navimow H series H500E, H800E & H1500E helps: it restores cutting performance and ensures your lawn is mowed evenly again. Seven sharp blades mean more cutting points and a finer result.
Fits perfectly for your SEGWAY Navimow H500E, among others
The 7-series cutting disc is compatible with the Navimow H series: Navimow H500E, Navimow H800E and Navimow H1500E. Swapping it on the mowing disc is quick and straightforward—no long fiddling with tools.
Swap without tools and without waiting
The cutting disc works with 7 blades for a finer cutting pattern and consistent results across the entire mowing area. The closer the cutting edges are, the finer the result: a lawn without leftover strips. You get the 7-series cutting disc as a complete replacement, so you don’t have to piece together individual parts. The swap on the mowing disc takes only a few minutes and works without tools—unpack, attach, done.
Grass clippings stand no chance here
With fresh blades, the cutting disc reduces the risk of grass building up on the mowing disc. Especially after rain, clippings collect around the blades and cost cutting speed; sharp blades keep the path clear. This makes operation more reliable— even when your Navimow is out and about in denser growth. Fewer interruptions, less rework, and a calmer mowing operation.
What speaks for this set
Top reviews
Wymieniłem tarczę w moim Segway Navimow H500E i trawa wygląda dużo równo. Szkoda tylko, że instrukcja montażu jest bardzo krótka.
Na basis van mijn research heb ik deze 7er-Messerscheibe gekocht voor mijn Segway Navimow H800E, omdat mijn vorige snede na een paar maanden minder strak werd. Na trying two other brands te hebben getest, snap ik nu waarom deze beter blijft: de 7 klingen geven een gelijkmatigere maaibeeld en het vervangen ging vrij vlot, ongeveer 15–20 minuten, met een nette passing. Eén klein minpunt: bij het vastzetten moet je de bouten echt goed aandrukken om speling te voorkomen.
bought this for my segway navimow h800e when the cut started looking a bit ragged. it fit well and the replacement process was pretty quick, and the lawn looks cleaner and more even again. only thing is the blade disc takes a bit of careful tightening so everything sits flush.
jeg købte denne 7-klingers messerskive til min segway navimow h800e, efter snittet begyndte at blive lidt ujævnt. den passede lige i uden at bøvle, og jeg kunne skifte på cirka 20 min. 5/5, den holder virkelig formen og giver et pænere græs hver gang.
Bytte messen på min Segway Navimow H500E efter att snittet börjat bli ojämnt. Den nya 7-klingade skivan passade direkt och jag märkte att gräset klipptes jämnare redan första dagen. Enda minuset är att den kräver lite extra moment vid montering så att allt sitter helt utan glapp.
den passar min navimow h800e som den ska och ger jämnare klippning direkt. jag hade gärna sett lite tydligare instruktioner i förpackningen.
The 7-blade cutting disc is a great addition for my Segway Navimow H800E. My lawn looks much more even now, and I am thrilled with how easy the replacement was. After inserting the new blades, mowing is significantly more efficient again. With my slightly larger garden of 600 sqm, this is a real relief. I can only recommend it!
The 7-blade cutting disc works well with my Segway Navimow H500E, delivering a clean cut across my lawn. Installation took about 15 minutes, and the provided screws made it straightforward. The only downside was a slight delay in shipping, but overall, it’s a solid upgrade for maintaining a healthy lawn.
J’ai commandé cette 7er-Messerscheibe pour ma Segway Navimow H500E après avoir constaté une coupe un peu moins nette dans mon jardin de taille moyenne. L’ancien disque montrait des signes d’usure et, dès le premier démarrage avec la nouvelle pièce, l’herbe a été recoupée de façon plus régulière. Le remplacement est simple et le disque est bien ajusté, mais il faut vraiment prendre le temps de serrer correctement pour que tout soit parfaitement en place. 5/5, je referai l’échange au prochain entretien.
tavlen passer til min segway navimow h1500e og klipper helt jævnt, også efter en del brug; udskiftningen tog under 20 minutter.
The 7-blade cutting disc for my Segway Navimow H1500E made a big difference in the quality of the cut. The installation took about 20 minutes, and changing the blades with the provided screws was easy. My garden looks much better now, I recommend this accessory for its efficiency!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What is the difference between the 6-blade, 7-blade, and 9-blade cutting discs for the Segway Navimow H500E, H800E, and H1500E?
The 7-blade cutting disc offers a good balance between cutting quality and efficiency. For the H500E and H800E, which mow smaller lawns, the 7-blade variant is ideal, while the 9-blade version is recommended for larger areas and more intensive use. The 6-blade disc, on the other hand, is suitable for very well-maintained lawns where less cutting power is sufficient.
Are the CUT GUARD retrofit discs a good alternative to the original cutting disc for my Segway Navimow?
Yes, the CUT GUARD retrofit discs offer good value for money and are often durable. However, they may slightly lag behind the original parts in cutting quality, especially in dense or tall grasses, where the precision of the original disc is advantageous.
How does the 7-blade cutting disc affect battery life and the health of my lawn?
The 7-blade cutting disc ensures an even lawn height through its precise cutting guidance, promoting the health of the lawn. Additionally, it can optimize battery life, as less energy is required to effectively guide the blades through the grass compared to worn or inefficient blades.
What is the shipping and return policy for the 7-blade cutting disc for the Segway Navimow?
The shipping of the 7-blade disc usually takes place within 2-3 working days after ordering. If you are not satisfied with the product, you can return it within 30 days – simple and straightforward, to give you confidence in your purchasing decision.
What common problems occur with the 7-blade disc for the Navimow H-Series?
A common problem is the twisting of the blades when they are not properly mounted. Users also report faster wear when the disc is used on heavily overgrown lawns for extended periods. Regular maintenance and replacing the blades when worn are important.