7-Blade Cutting Disc for Dreame A1, A1 Pro & A2 Robotic Lawnmower – Precision Mowing Disc
- 7-blade cutting disc for Dreame A1, A1 Pro, and A2 robotic mowers
- Precision mowing disc with 7 blades for controlled blade guidance in the cutting area
- Suitable as a replacement cutting disc when the original cutting disc is worn or damaged
- Supports clean blade rotation and even lawn care with regular use
- Compatible spare part for maintenance, replacement, and reliable cutting performance during the season
incl. 7 blades
incl. 9 blades
+
+
Compatibility – DREAME
Fits the following robotic mowers:
- ✓ A1
- ✓ A1 Pro
- ✓ A2
As soon as your DREAME A1, A1 Pro or A2 suddenly starts mowing more sluggishly, this 7-blade cutting disc will bring back speed and clean cuts.
Get your lawn back to clean cutting edges
Dull blades tear the grass rather than cutting it—this is immediately noticeable in uneven stripes. Worn blades are rarely noticeable on the robot, but always on the lawn: it looks dull and uneven. With the 7-blade cutting disc for Dreame A1, A1 Pro & A2, you ensure that the mowing disc cuts properly again and the grass is captured cleanly. Seven cutting edges in use means: more contacts per revolution, finer finish.
Fits perfectly for your DREAME A1 and more
The 7-blade cutting disc fits exactly for DREAME A1, A1 Pro and A2. The swap is quick: remove the old cutting disc, put on the new one—no long tool fiddling.
Unpack, attach, mow away
The 7 blades work more evenly and deliver a finer cutting pattern, especially on denser lawns. More blade contact per revolution means: fewer missed blades, more uniformity. You get the cutting disc as a complete mowing disc replacement—ready to install in your DREAME. Two hand grips, no five minutes: that’s how fast the new disc is mounted.
So that no grass clogs up on the disc anymore
More blades mean less “getting stuck”: the grass is distributed better and less blocked at the mowing disc. Wet grass clippings like to settle around the cutting zone and slow things down – fresh blades keep everything running smoothly. This way, your DREAME A1, A1 Pro or A2 runs reliably again and mows more evenly across the area. Fewer interruptions and a calmer mowing operation.
All benefits at a glance
Top reviews
werkt super op mijn dreame a1 pro: duidelijke pasvorm en de 7 klingen maken het maaibeeld weer mooi gelijkmatig, zelfs na wat zwaarder gebruik. het wisselen was niet moeilijk en de onderdelen zagen er netjes uit. 5/5 van mij!
fungerar precis som den ska på min dreame a1 pro; 7 klingen gör att gräset klipps jämnare igen. enkel att byta och sitter bra utan strul.
7 klingen passer perfekt til min Dreame A1 Pro. Monteringen var nem, og plænen ser pæn og jævnt klippet ud.
Die 7-Klingen-Messerscheibe für meinen Dreame A2 passt grundsätzlich gut, und der Austausch ging bei mir in ca. 10–15 Minuten über die Bühne. Die Klingenführung wirkt gleichmäßiger als bei der alten Scheibe, und ich konnte die 3 Schrauben ohne Probleme festziehen. Ein kleiner Wermutstropfen: Auf der Abdeckung war bei Ankunft schon ein leichter Kratzer, sonst ist das Teil ok.
Jeg købte den her 7-klinge målerskive til min Dreame A1 Pro, fordi den originale efterhånden var slidt, og det var helt fint at få den skiftet. På mit ca. 300 m² haveareal ser græsset mere jævnt ud bagefter, og rotationen virker mere kontrolleret i selve skæreområdet. Den passer dog ikke helt så “driftsikker” som forventet første gang, jeg måtte lige justere/rette den lidt for at den sad helt korrekt. Leveringen var hurtig og emballagen okay, men kvaliteten føles mest som en standard reservedel.
j’ai remplacé la lame à 7 klingen sur mon dreame a1 pro après usure, et franchement ça change tout: la coupe est plus régulière et le gazon reprend un aspect bien propre. le montage est simple, j’ai juste pris le temps d’aligner la pièce pour que la rotation soit nickel, et depuis ça tourne sans bruit bizarre.
Swapped this 7-blade cutting disc onto my Dreame A1 and it made a noticeable difference in how cleanly the lawn looks, especially along the edges where the robot usually struggles. The fit was spot-on and the blades’ rotation feels more controlled, which matters in my fairly busy backyard (about 250 m²) with regular mowing. Only minor downside: the packaging could be a bit more protective for the disc, since it arrived with a small scuff on the cover.
Well-made disc with 7 blades, fits perfectly on my Dreame A1. Additionally, it arrived quickly.
This 7-blade cutting disc installs easily and really improves the performance of my Dreame A1. I noticed better blade rotation, but I wish the screws were included with the product. That said, an excellent choice for a replacement!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How does the 7-blade cutting disc from CUT GUARD affect the battery life and health of my lawn?
The 7-blade cutting disc ensures a uniform and clean cut due to its precise design, optimizing the battery life of your Dreame A1, A1 Pro, or A2 robotic mower. A better cutting pattern promotes the health of the lawn, as the grasses are less stressed and can regenerate faster.
Is the CUT GUARD cutting disc compatible with my Dreame A1 Pro robotic mower?
Yes, the 7-blade cutting disc from CUT GUARD has been specifically designed for the models Dreame A1, A1 Pro, and A2. This compatibility ensures that the disc fits perfectly on your device and does not impair performance.
How long does shipping of the CUT GUARD cutting disc take, and can I return it if it doesn't fit?
Shipping of the 7-blade cutting disc usually takes place within 2-3 business days. If you are not satisfied with the disc or find that it does not fit, you can return it within 30 days as long as it is unused.
What material is the CUT GUARD cutting disc made of, and how durable is it compared to original discs?
The CUT GUARD cutting disc is made of high-quality, durable steel that has been specially treated to ensure a long lifespan. Compared to many original discs, it offers higher resistance to wear, making it a cost-effective choice.
What happens if I install an incompatible blade on my Dreame A1?
Using an incompatible cutting blade can lead to imbalances that may damage the lawn mower robot. This can not only affect the motor performance but also result in uneven cutting patterns and a shortened lifespan of your device.