Cutting disc for Mammotion LUBA MINI AWD and LUBA Mini 2 AWD
- cutting disc for Mammotion LUBA MINI AWD 800, 1500, LiDAR and LUBA Mini 2 AWD – a mount for both generations
- Three versions: 6, 7 or 9 blades – the more blades, the finer the cutting pattern
- Protection for every version – keeps the blades in position and reduces grass clumping on the mowing disc
- Blades pre-assembled, tool-free replacement – do the maintenance at home
- Optional as a set with 60 replacement blades – the supply for the whole season is in the drawer
+
+
+
Compatibility – Mammotion
Fits the following robotic mowers:
- ✓ LUBA MINI AWD 800
- ✓ LUBA MINI AWD 1500
- ✓ LUBA MINI AWD LiDAR
- ✓ LUBA Mini 2 AWD
The LUBA MINI brings Mammotion mowing technology into a format that fits typical home gardens – and that’s exactly where it’s constantly in use. To ensure the compact robotic lawnmower always cuts cleanly, this is the right replacement mowing disc: available with 6, 7 or 9 blades, each version with protective and pre-equipped blades.
How many blades for your garden – 6, 7, or 9?
All three versions use the same mounting and provide the same protection – they are fitted to the LUBA MINI in exactly the same way. The difference lies in the number of cutting edges per revolution: the more blades, the more finely the grass is cut.
The classic replacement for a well-kept lawn: six fresh blades restore the familiar, even cut pattern without you having to change anything in the mowing plan of your LUBA MINI. Remove the worn disc, fit these – and you’re back in business.
Seven blades provide one additional cutting edge per rotation. On lawns that become dense quickly in early summer, the mowing disc picks up more blades per pass – the result looks more uniform without the robotic lawnmower having to run longer.
Nine blades shred the clippings into the finest pieces: the tiny scraps disappear between the blades of grass instead of ending up scattered on the lawn. The right choice for everyone who wants to get the densest, most even result out of the compact LUBA MINI.
Small robot, big workload
In a compact garden, the LUBA MINI covers the same areas especially often – every corner, every edge, week after week. What looks like effortless routine on the lawn adds up on the mowing disc to many hours of operation, while the blades gradually lose their sharpness.
Every owner knows the result sooner or later: instead of being cleanly cut, the grass is torn, the tips of the blades start to discolor, the cut pattern looks uneven – and the motor has to work harder against the increased resistance of dull blades.
A fresh mowing disc resets everything in one step: sharp blades, clean cutting edges, and a lawn that looks as well cared for as it did in the first week after buying the robotic lawnmower.
The disc comes fully equipped and sits directly on the mounting of all LUBA MINI models – from the AWD 800 via 1500 and LiDAR to the LUBA Mini 2 AWD.
Maintenance is handled by the drawer, not the workshop
With the LUBA MINI, you don’t need to hire anyone for the cutting system: switch off the robotic lawnmower, carefully tilt it, remove the old mowing disc, and attach the new one. No tools, no adjustment work – the complete swap is done in just a few minutes right at your garden table.
The protective frame is included with all three versions. It keeps the blades securely in position and supports a smooth, free run of the mowing disc – damp clippings that would otherwise collect around the blades and slow down rotation get less opportunity to cause trouble.
If you already have a replacement mowing disc in the drawer, you’re also prepared for in-between incidents: after contact with a stone, a branch, or hidden toys, briefly check the mowing disc – and replace it immediately if needed, instead of waiting days for replenishment.
Before winter, it’s enough to clean the disc of grass residue and moisture. Anyone who starts in spring right away with fresh blades has a clean cut pattern from day one.
Select the appropriate blade count above – 6, 7, or 9; if you like, also as a set with 60 replacement blades. Each version fits Mammotion LUBA MINI AWD 800, 1500, LiDAR and LUBA Mini 2 AWD and is delivered ready to install.
Top reviews
After some research for my Mammotion LUBA Mini 2 AWD, I chose this cutting disc after trying two other brands. The fit is good for me, and the 6 blades can be swapped quickly; with the blade guard, less grass and clippings get caught. The cut looks neat again, but the delivery could have been better packaged, because the blade packaging was slightly crumpled when it arrived. Overall solid, but not quite perfect.
I replaced this cutting disc on my Mammotion LUBA MINI AWD 1500: the 6 blades included fit perfectly, and with the protective piece, less debris gets caught between the grass. Installation took me about 10 minutes; I did have to pay close attention to the bolt/screw position so everything locks in properly.
I swapped this on my Mammotion LUBA Mini 2 AWD and the cut looks clean again. The blade guard is a nice touch, and the six replacement blades included made it an easy job instead of waiting for parts. So far it hasn’t jammed on thick grass.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Frequently asked questions
Which Mammotion models is this cutting disc specifically suitable for?
It fits the Mammotion LUBA MINI AWD 800, LUBA MINI AWD 1500 and LUBA MINI AWD LiDAR, as well as the new LUBA Mini 2 AWD (1000 and 1500 LiDAR). Both generations use an identical mounting and identical blade screws, so the replacement process is the same for all models.
Can I also use the disc on a larger Mammotion such as the LUBA MAX AWD?
No. This cutting disc is designed for the compact LUBA MINI models; it is not intended for larger Mammotion robotic lawnmowers such as the LUBA MAX AWD. Before purchasing, it’s best to compare the model designation of your device and the design of the existing mowing disc.
How do I choose between 6, 7, and 9 blades in a typical home garden?
The 6-blade version is the proven standard replacement for the familiar cutting pattern. Seven blades provide one additional cutting edge per revolution and are worth it when the lawn grows quickly and becomes dense. Nine blades break up the clippings the finest—ideal when, during mulching mowing, you want as little as possible to remain visible. All three are installed the same way.
Do I need to take the robot to a workshop to change the disc?
No, you can handle the maintenance of the cutting system completely yourself: switch off the robot, carefully tip it over, remove the old disc, and attach the new one. No tools are needed for this, and the entire process takes only a few minutes.
Is a replacement mowing disc in the drawer enough for an entire season?
With regular mowing in a typical home garden, a replacement cutting disc as a reserve is usually sufficient to get through the season. More often needed are the blades themselves—there is every option available as a set with 60 replacement blades. After contact with stones or branches, you should also briefly check the disc for damage.
Do I have to screw the blades on myself before the first use?
No, the blades are pre-assembled—depending on the version, 6, 7 or 9 pieces. You simply place the complete disc onto the mount of your LUBA MINI, and the robot can start mowing right away.
Is the guard only available for the 6-blade version?
No, in this series the guard is included with all three versions—6, 7 and 9 blades. It keeps the blades securely in position, supports smooth running of the disc, and helps reduce grass buildup around the blades.
Is this an original part from Mammotion?
No, it is a compatible cutting disc from CUT GUARD. It is manufactured to fit the mounting of the LUBA MINI models precisely and is designed for regular mowing in a home garden—a readily available alternative to the original part with pre-assembled blades.