Cutting disc for Segway Navimow i105E, i108E & i205 AWD – Cutting plate with protection and 6 blades
- Blade disc for Segway Navimow i105E, i108E, and i205 AWD robotic mowers
- With protection and 6 blades for replacing worn or damaged knives
- Grass-blocking low mowing plate for a smoother operation of the cutting system
- Suitable as a blade plate, cutting disc, or replacement mowing plate for compatible Navimow models
- Durable and safe solution for maintenance, repair, and even lawn care
incl. 6 blades
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow i105E
- ✓ Navimow i108E
- ✓ Navimow i205 AWD
Especially when your SEGWAY Navimow noticeably mows more slowly or the cut pattern becomes patchy, the right cutting disc with 6 blades is exactly the quick lever back to a clean cut.
Why the lawn suddenly looks unkempt
Dull blades tear the grass rather than cutting it—this is immediately visible in uneven stripes. Worn blades no longer produce clean cuts, but instead leave frayed, stressed blades. With the cutting disc for SEGWAY Navimow i105E, i108E & i205 AWD, you restore cutting performance and ensure your mowing disc works reliably again. Six sharp blades deliver an even, clean cutting pattern.
Fits your SEGWAY Navimow i105E, among others
The cutting disc is made for the Navimow i105E, i108E and i205 AWD models—so it fits properly on the mowing disc. The swap is tool-free: remove the old cutting disc, attach the new cutting disc, and you’re done.
Ready to use in just a few minutes
6 blades ensure a more even cutting pattern, so the grass is cut cleanly. Sharp blades cut through the stems precisely instead of crushing them—something you can even see up close. You get the cutting disc including guard and the 6 blades—complete, so you can get back to mowing right away. Thanks to the integrated guard, the blades sit firmly in place—everything is mounted tool-free in minutes.
No more getting stuck in thick grass
With sharp blades, the mowing disc is less prone to grass blockages because the cut material is processed more cleanly. Otherwise, damp material sticks around the blades and slows down rotation—an overrunning mowing disc keeps the flow of grass moving. This way, your SEGWAY Navimow runs steadily through the mowing zones and you have to intervene less. Fewer stops, less rework, and a consistently well-kept lawn.
That’s why switching is worth it
Top reviews
Bytte skärskiva till min Segway Navimow i108E och det blev märkbart jämnare klippning direkt. Skyddet sitter bra och de sex klingorna ger ett friare löp, så gräs fastnar inte lika ofta. Montering gick smidigt utan strul.
voldoet precies voor mijn segway navimow i105e; met de beschermkap en 6 kling(en) minder last van grasophoping en strakker maaibeeld. monteren ging snel.
ik heb deze messerscheibe voor mijn segway navimow i205 awd gekocht en hij past echt netjes zonder gedoe. met de beschermkap en die 6 klingen loopt het geheel rustiger en maaien blijft mooier egaal. enige minpuntje: de montage voelde iets strakker dan mijn oude set, dus ik moest ’m even opnieuw goed uitlijnen.
J’ai remplacé la lame de mon Segway Navimow i108E avec cette messerscheibe, et franchement ça change le quotidien : les 6 lames coupent de façon régulière et le système semble moins sujet aux blocages, même quand l’herbe est un peu haute dans mon jardin d’environ 600 m². Le disque avec son protecteur s’emboîte bien et j’ai pu le monter sans forcer. Après quelques cycles de tonte, la qualité de coupe est revenue comme au début, et c’est pile ce que je cherchais pour l’entretien. Théo
It was a great investment for my Segway Navimow robotic lawnmower! The new disc with 6 blades works much better and handled my garden of 500 m². I noticed it has fewer blockages while mowing, which definitely speeds up the work. The only thing that could be better is the assembly instructions - they were quite complicated. Nevertheless, I recommend this product to anyone looking for solid spare parts!
After trying two other brands of replacement blades for my Segway Navimow, this cutting disc has performed sufficiently well. The six blades cut smoothly, and I noticed fewer blockages during mowing, which is a plus. However, the packaging could have been better; it arrived slightly damaged, which made the installation process a bit cumbersome. Overall, it’s a decent replacement option for anyone needing maintenance parts.
passt perfekt auf meinen segway navimow i105e, mit schutz und 6 klingen läuft der mähteller deutlich ruhiger. nach dem tausch weniger grasblockierungen, macht was es soll.
Jeg købte denne messerskive til min Segway Navimow i108E efter at have prøvet to andre brands, fordi jeg ville have noget, der faktisk passer uden bøvl. Den medfølgende beskyttelse og de 6 klinger gjorde udskiftningen hurtigere, og efter et par kørsler ser klipningen mere ensartet ud. Jeg oplevede dog én ting: klingen føles en anelse strammere i montering end originalen, så jeg skulle justere lidt før alt sad helt i ro. Samlet set et godt køb til vedligehold.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How quickly can I expect the delivery of the CUT GUARD blade for my Segway Navimow i105E?
The delivery of the CUT GUARD blade usually takes place within 3-5 working days after ordering. We also offer a 30-day return guarantee, so you can test the product risk-free.
What are the advantages of the original CUT GUARD blade compared to aftermarket blades?
The original CUT GUARD blade for Segway Navimow offers an optimal fit and is specifically designed for the models i105E, i108E, and i205 AWD. Compared to aftermarket blades, they have a higher material quality and durability, which reduces maintenance costs in the long run.
What common problems occur when using the blade with my Segway Navimow i205 AWD?
Users often report uneven cutting quality when the CUT GUARD blade is not mounted correctly. Overloading due to grass clippings can also occur, which is why regular maintenance and cleaning are important to ensure smooth operation.
Is the CUT GUARD blade compatible with my Segway Navimow i108E?
Yes, the CUT GUARD blade is specifically designed for the Segway Navimow i105E, i108E, and i205 AWD, and therefore fits these models without any issues. Make sure to check the correct alignment of the blades before installation.
What is the difference between the blade variants 6, 7, and 9 for the Segway Navimow and which one should I choose?
The CUT GUARD cutting disc has 6 blades, which are ideal for maintaining small to medium-sized lawns. A 7 or 9-blade variant offers a more intense cut but may also require more power and is less efficient on fine grass. For most homeowners, the 6-blade option is a balanced choice.