Cutting disc for Segway Navimow H-Series H500E, H800E & H1500E – Mowing disc with protection and 6 blades
- Blade disc for Segway Navimow H-Series H500E, H800E, and H1500E robotic mowers
- With protection and 6 blades for maintenance, replacement, and reliable cutting performance
- Grass-blocking low mower deck for smoother operation in wet or dense grass cutting
- Suitable as a blade plate, cutting disc, or replacement mower deck for compatible Navimow H models
- Durable and safe solution for consistent blade guidance during the mowing season
incl. 6 blades
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow H500E
- ✓ Navimow H800E
- ✓ Navimow H1500E
Make sure your SEGWAY Navimow cuts cleanly through the grass again—with the right cutting disc for H500E, H800E & H1500E, including 6 blades and protection.
No more uneven cut edges
When the blades become dull, the Navimow tears the grass apart rather than cutting it cleanly—resulting in uneven strips and more rework. Over time, this also puts strain on the motor, which has to work against the resistance. With the new cutting disc for SEGWAY Navimow H-Series H500E, H800E & H1500E, you restore cutting performance and give your mowing disc back the right sharpness for an even cut. Six sharp blades ensure a clean, dense result.
Fits your SEGWAY Navimow H500E, among others
The cutting disc is precisely designed for the SEGWAY Navimow H series: Navimow H500E, Navimow H800E and Navimow H1500E. The swap is quick and easy—remove the blade plate, attach the cutting disc, done, without complicated tools.
The quick way to fresh blades
The 6 blades of the cutting disc ensure a finer cutting pattern and even cutting edges. A sharp cut separates cleanly, a dull one crushes—this difference shows up in the density of the lawn. In the package you will receive the cutting disc with guard as well as the 6 blades—so the replacement is completed right away. The blade guard reliably secures the blades, and the swap works completely without a toolbox.
Fewer stops, more mowed area
With sharp blades, the risk is reduced that wet or long grass will build up on the mowing disc. Otherwise, damp clippings stick around the blades and slow down rotation—an overrunning mowing disc keeps the flow of grass moving. This helps your Navimow run more reliably, cut more evenly, and stay on pace even under changing conditions. Fewer stops, less rework, and a well-kept lawn throughout the season.
Your benefits at a glance
Top reviews
passt perfekt für meinen segway navimow h500e, die messerscheibe sitzt sauber und die 6 klingen schneiden sehr gleichmäßig. bei feuchtem rasen bleibt dank schutz und weniger blockierung deutlich weniger gras hängen.
It fit my Segway Navimow H800E without any fuss, and the 6 blades cut evenly even in damp grass. The protective guard felt a bit tight during installation, but it’s holding up well now.
werkt prima op mijn segway navimow h800e en de beschermrand helpt inderdaad tegen dat je sneller rommel mee krijgt tussen het gras. bij mij duurde het wel even voor alles goed vast zat, en de verpakking was niet helemaal super stevig.
Schnell geliefert und die Messerscheibe passt sauber auf meinen Navimow H1500E. Die 6 Klingen laufen gleichmäßig und blockieren bei feuchtem Gras deutlich weniger, mit Schutzplatte.
działa bez zarzutu w moim segway navimow h1500e, a osłona dobrze trzyma się przy gęstym trawniku. 6 klingów po wymianie tnie równo i nie szarpie trawy.
Schnell geliefert und die Messerscheibe sitzt bei meinem Navimow H500E genau richtig. Mit dem Schutz und den 6 Klingen schneidet er auch bei feuchtem, dichtem Gras sehr gleichmäßig.
montage assez simple sur mon navimow h800e, la protection autour du disque évite bien de trimballer des brins. ça coupe proprement et j’ai moins de souci quand l’herbe est un peu dense, avec les 6 lames. petit bémol : c’est légèrement plus lourd que l’ancienne pièce, donc le changement demande un peu de minutie.
fits my segway navimow h800e perfectly, and the guard keeps grass from getting tangled up. cuts clean with all 6 blades even when it’s damp.
Installed the replacement disc on my Segway Navimow H500E in about 15–20 minutes, and it lined up well with the existing screws. The set comes with 6 blades and they run evenly, even when the grass is a bit wet; the protective guard does help with reduced buildup. Only downside: the guard is slightly awkward to seat at first.
Hurtig levering og den passer direkte til min Segway Navimow H500E. Klingen tårner pænt i vådt græs, og beskyttelsesringen reducerer græsansamling.
Fast delivery and easy to replace. Cuts well, even in wet grass!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does the shipping of the cutting disc for my Segway Navimow H500E take?
The shipping of the cutting disc for the Segway Navimow H500E usually takes place within 2-3 working days. We offer reliable delivery so you can quickly get back to working with your robotic mower. If you are not satisfied with the product, you can easily return it within 30 days.
What are the advantages of the CUT GUARD cutting disc compared to retrofit discs?
The CUT GUARD cutting disc offers high-quality workmanship and a precise fit for the Segway Navimow H-series, which improves cutting performance. While retrofit discs may be cheaper, they often do not provide the same efficiency and durability, which can lead to more frequent replacements.
How can I tell that the blades of my CUT GUARD cutting disc need to be replaced?
A blade replacement should be considered if you notice that the cutting pattern is becoming uneven or the blades show visible damage. If grass clippings are increasingly sticking to the mowing plate, this is a sign that the blades are no longer cutting optimally and should be replaced.
Are there specific problems that frequently occur with the cutting disc for the Segway Navimow H800E?
A common problem with the blade disc for the Segway Navimow H800E is the accumulation of grass clippings, especially in wet weather. This can cause the mowing deck to become blocked and the robotic mower to operate inefficiently. An uneven cut may also indicate worn blades that should be replaced in a timely manner.
How do I replace the CUT GUARD blade disc on my Segway Navimow H1500E?
Replacing the blade disc on your Segway Navimow H1500E is done in a few steps: First, turn off the robotic mower and remove it from the charging station. Then you only need a wrench to loosen the screws of the old blade disc. After replacing the disc, secure everything back in place, and the entire process should take no longer than 10-15 minutes.