Cutting Disc TerraMow S800, S1200, V600 & V1000

replacement cutting disc · TerraMow S800, S1200, V600 & V1000

TerraMow is still young on the German market – and you notice it as soon as a wear part is due. This cutting disc for S800, S1200, V600 and V1000 is in stock with us in Europe instead of being on the way for weeks: ordered, delivered, mowed on. With 6, 7 or 9 blades, each disc ready to be fitted.

✓

From the EU warehouse instead of from overseas

No waiting for weeks in the middle of the season

✓

A part for four models

S800, S1200, V600 and V1000

✓

6, 7 or 9 blades

You decide how finely it is cut

✓

Blades pre-assembled

Unpack, attach, and continue mowing

✓

Tool-free change

Remove the old disc, put on the new one – in minutes

✓

60 blades set optional

Stock that never stops you

6, 7 or 9 blades – which disc should be in your cupboard?

All three versions fit the same mounting for the TerraMow and are available immediately from stock. The difference is how often a blade is hit per revolution: more blades mean more cutting points and thus a finer cut pattern. Also pay attention to the design – only the 6-blade version carries the circumferential protective frame.

6 blades

With protective frame – as usual

The version with a circumferential protective ring and covered hub. If you want to simply replace your worn mowing disc and not change the design, take this disc – it is the direct successor to the mowing disc that has been on the robotic lawnmower so far.

7 blades

One more cut

Lower mowing disc without a protective ring, instead with an additional cutting edge. Seven blades also catch the stems that six blades leave behind – noticeable when the lawn has been pushed back strongly after a week of rain.

9 blades

Finest cut

Also designed to be flat, with the densest blade spacing of this series. Nine cutting blades break the grass into such short pieces that it disappears between the stems when mulching – the choice for the most well-groomed look.

+

Each version also available as a 60 replacement blades set

The real reason for downtime is rarely the cutting disc, but the missing blade at the right moment. With the 60 blades set, you’ll have stock for the entire season in the cupboard, swap them on the day it’s needed – and pay less than when buying individually.

replacement mowing disc with protective frame and 6 blades for TerraMow robotic lawnmower — The 6-blade disc with surrounding protective frame and covered hub

Why a replacement part on the shelf is worth more than one on the ship

With established brands, you get a mowing disc in every corner. With TerraMow, it’s different: the S and V series has only been on the market in this country for a short time, so the replacement part network is correspondingly thin. If you order from the manufacturer, you often have to wait for weeks for a shipment that first has to cross half the world.

It’s just unfortunate that wear and tear doesn’t choose the timing. Dull blades show up in June, when the lawn grows fastest – and then the robotic lawnmower is exactly in the weeks when it’s needed most urgently. Two weeks of delivery time turn into two weeks of manual work with the lawnmower.

That’s why this cutting disc is kept in stock with us in Europe. Order today and have the replacement in your hands within a few days, not next month. Your TerraMow mowing schedule keeps running as if nothing had happened.

The disc comes fully equipped from the packaging and fits onto the existing mount of the S800, S1200, V600 and V1000 – without adapters, without modification, without any adjustment work.

Protective or flat – and what that means when changing

One point you should know before placing your order: The surrounding protective frame with a covered hub supports only the 6-blade version. It guides the blades in the cutting area and keeps cut material away from the center of the mowing disc. The 7- and 9-blade variants are intentionally designed to be flat so that the more closely spaced cutting edges can work freely.

This has no impact on installation – all three sit on the same mount. The change itself doesn’t require a screwdriver: switch off the robotic lawnmower, carefully tilt it, remove the old mowing disc, and fit the new one. Since the blades are already fully mounted, fastening individual blades is completely unnecessary.

Two minutes, a pair of gloves – that’s all. That’s exactly why it’s worth keeping a replacement disc in the cupboard: you swap it in the evening and the robotic lawnmower makes its round the next morning, without a single mowing day being missed.

After contact with branches, stones, or roots, it’s worth taking a quick look at the mowing disc and blades. If the disc shows notches or runs unevenly, the replacement is already there – and the season keeps going without interruption.

Flat cutting disc with 9 blades for TerraMow, tool-free replacement — The 7-blade and 9-blade discs are flat – without a protective ring

Select the desired blade count above – 6 with protective ring, 7 or 9 flat – and, if you wish, right away together with 60 replacement blades. Each variant fits TerraMow S800, S1200, V600 and V1000, comes pre-assembled and ready to install, and ships directly to you from the EU warehouse.

Detailed product description & technical detailsshow ▾

Cutting disc for TerraMow S800, S1200, V600 & V1000 – replacement mowing discs with 6, 7 or 9 blades

A cutting disc for TerraMow S800, S1200, V600 and V1000 is the component that organizes the actual work in the cutting system: the mowing disc carries the freely swinging blades, holds them in position, and stabilizes their rotation in the mowing area. If the cutting quality declines or the existing disc no longer sits properly, replacing it is the simplest repair for the entire robotic lawnmower. On this page, you’ll find the right replacement in three versions – with 6, 7 or 9 blades, each pre-equipped and available from stock in the EU.

Availability: the difference between days and weeks

TerraMow is one of the newer brands in the German-speaking region. The spare parts network is correspondingly thin, and original parts often take a long journey before they reach the customer. For a wear part that becomes due in the middle of the growth phase, this is the wrong delivery time: if the robotic lawnmower is idle for two weeks in May or June, the lawn catches up exactly with the delay that the device is actually supposed to prevent. This cutting disc is stocked in Europe and ships out on short notice – so the mowing schedule can run.

Compatible with S800, S1200, V600 and V1000

The disc is intended for the TerraMow models S800, S1200, V600 and V1000 and fits precisely onto their mowing disc mount. One part covers both the S and the V series, which makes storing replacement parts much easier – even when two different models are in use in the garden. Please check the exact model designation of your device before purchasing and compare the design of the existing cutting disc.

Which blade count is right for your lawn?

The 6-blade version is the classic replacement for the worn mowing disc and the only variant with a surrounding protective frame. The 7-blade version makes one more cut per revolution and therefore also captures blades that six blades would leave behind. The 9-blade version delivers the finest result in this product line: more cutting points mean shorter clippings and better mulching performance. Mechanically, all three fit identically onto the same mount.

Protection only with the 6-blade variant

An important difference in design: the protective cover with a surrounding ring and covered hub belongs to the 6-blade version. It supports the controlled guidance of the blades in the cutting area and keeps clippings away from the center of the mowing disc. The versions with 7 and 9 blades are built flat so that the closely spaced cutting edges can swing freely. If you want to keep the familiar design, choose the 6-blade variant; if you’re aiming for a finer cut pattern, go for the flat version.

Change without tools – blades already mounted

For the replacement on the TerraMow, you don’t need a screwdriver: switch the robotic lawnmower off, carefully tilt it, remove the old mowing disc, and fit the new disc. Since the blades are delivered fully mounted, the individual screwing of the blades is no longer necessary – the disc is ready to use straight out of the packaging. A complete replacement takes only a few minutes and fits conveniently between two mowing sessions.

Recognize wear before the lawn shows it

Dull blades tear the grass rather than cutting it. Typical signs include frayed instead of cleanly separated blade tips, brownish discoloration of the cut edges, an unsteady run in the cutting area, or noticeable noises. Visible signs of wear on the mowing disc, blades that no longer sit securely, or a noticeably slower throughput in dense grass also indicate that a replacement is needed. After contact with branches, stones, or roots, the mowing disc and blades should be checked as well – a warped mowing disc creates imbalance and puts additional strain on the cutting unit.

Optional in a set with 60 replacement blades

Each blade quantity is available optionally as a set with 60 replacement blades. This ensures you’re covered for the entire season and you don’t have to reorder every time the cutting performance declines. Especially for a brand with manageable availability of replacement parts, keeping a small stock in the cupboard is the simplest insurance against unplanned mowing pauses – and in a set, replenishment costs less than buying later as a single item.

Compatible replacement part from CUT GUARD

This cutting disc is a compatible replacement part from CUT GUARD, not an original TerraMow part. It is manufactured to fit precisely for mounting on the S800, S1200, V600, and V1000; the material and blade guidance are designed for continuous operation in a robotic lawnmower. The key advantage over the original part lies in availability: stock in the EU instead of long procurement routes. Please compare the model name of your robot before purchasing to ensure the correct use.

Benefits at a glance

Suitable cutting disc for TerraMow S800, S1200, V600 and V1000 robotic lawnmower
In stock in the EU – short delivery time instead of weeks-long waiting in the middle of the season
Three variants: 6 blades with guard, 7 flat blades, 9 blades for the finest cut
Blades pre-assembled, blade change without tools in just a few minutes
Optional as a set with 60 replacement blades – cheaper than buying individually
Suitable as a mowing disc, cutting disc, or replacement mowing disc for maintenance and repair

Whether as mowing disc for TerraMow S800, blade plate for the S1200 or cutting disc for the V600 and V1000 – choose the desired number of blades and get a ready-to-install replacement part that’s quickly with you. So the season keeps going, even when the old disc gives up.

More TerraMow models

See all TerraMow cutting discs

4.5 out of 5

2 Reviews

5 stars 50%

4 stars 50%

3 stars 0%

2 stars 0%

1 stars 0%

Top reviews

E Emma 🇳🇱

Verified purchase

19. July 2026

This cutting disc fits neatly on my Terramow V600; all 6 blades click well into the holder and the protective cover aligns nicely. the swap took me about 15 minutes: mainly lining it up and then tightening the screws in the correct order was a bit precise work. one star less because the protective plate slides a little stiffly over the edge during installation.

E Erik 🇸🇪

Verified purchase

9. July 2026

I swapped to this cutting disc for my Terramow S1200 after testing two other brands. It fit right away and the guard sat snugly without needing any adjustment, and the six blades provided a noticeably more even grass edge. The rotation also sounds a bit more controlled compared to the previous discs, so it feels like the right replacement when it’s time for maintenance. The delivery also arrived in perfect condition.

Write a review

CUT GUARD Assembly Instructions

General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.

Note

These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.

Important Safety Notice

Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.

1. General Safety Instructions

The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
Never touch the cutting disc or the knives while they are still moving.
Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
Remove the battery if possible or disconnect the device from the power supply.
Always wear appropriate protective gloves.
Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
Regularly check the condition of the knives, fastening screws, and the cutting disc.

2. Required Tools and Materials

Suitable screwdriver or bit, matching the screws used.
Protective gloves.
New or tested fastening screws.
CUT GUARD cutting disc, replacement blades, or blades.
Optional: soft surface for safely placing the robotic mower.

Important

Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.

3. Preparation

Stop the robotic mower completely.
Turn off the device according to the operating manual.
Remove the battery if possible.
Wait until the cutting disc has completely come to a stop.
Carefully turn the robotic mower upside down and place it on a stable, soft surface.
Check the work area for cleanliness and adequate lighting.

4. Disassembly of the Existing Cutting Disc

Loosen the fastening screws of the existing cutting disc.
Completely remove the screws and set them aside safely.
Carefully remove the existing cutting disc from the knife holder.
Clean the knife holder of grass clippings, dirt, and debris.
Check the knife holder for damage or unusual wear.

Warning

Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.

5. Installation of the CUT GUARD Cutting Disc

Place the CUT GUARD cutting disc correctly on the knife holder.
Ensure that the cutting disc lies flat and is correctly centered.
Insert the appropriate fastening screws.
Tighten the screws evenly and firmly.
Do not overtighten the screws to avoid damage to threads or components.
After installation, check that the cutting disc is securely attached.
Gently turn the cutting disc by hand and check if it runs freely.

6. Installation or Replacement of Replacement Blades

Loosen the screws of the old blades.
Carefully remove the old blades.
Clean the contact surfaces on the cutting disc.
Place the new CUT GUARD replacement blades on the designated fastening points.
Ensure that the blades remain freely movable, as intended by design.
Secure each blade with a suitable screw.
Tighten the screws securely without overtightening.
Check each blade for a secure fit and free movement.

7. Post-Installation Check

Are all screws fully inserted and securely fastened?
Is the cutting disc lying flat and securely?
Can the blades move freely, if intended?
Are there no tools or foreign objects left in the area of the cutting disc?
Does the cutting disc run freely and without grinding?

8. Operation and Maintenance

Regularly check knives, screws, and cutting disc for wear.
Immediately replace damaged or heavily worn parts.
Regularly clean the cutting disc of grass clippings and dirt.
Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
Only use compatible spare parts and suitable mounting materials.

Note on Blade Replacement

Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.

9. Disclaimer

CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.

The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.

Warning in Case of Injury

Seek medical assistance immediately in case of injury or accident.

GPSR Information on Product Safety

Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.

Manufacturer & Responsible Person (EU)

Patryk Napiorkowski - Trivando

Am bhf Weinhübel 8

02827 Görlitz

Germany

Email:
service@trivando.de

Website:
www.trivando.de

Product Identification

Brand: CUT GUARD

Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers

Intended Use: Accessories and replacement parts for suitable robotic mowers

Product Type: Cutting and fastening components for use in robotic mowers

Item Number / Model / Variant: see respective product description, packaging, or invoice

Compatibility: see product description and operating instructions of the robotic mower

Important Warning

Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.

Intended Use

CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.

The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.

Not Suitable For

Children.
Persons who have not read or understood the operating instructions of the robotic mower.
Incompatible robotic mowers.
Devices with damaged blade mounts, damaged threads, or defective fastening points.
Use outside the intended application area.
Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.

Safety and Warning Notices

Use only for the intended purpose.
Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
If possible, remove the battery or disconnect the device from the power supply.
Always wait until the blade disc has come to a complete stop.
Always wear appropriate protective gloves.
Keep hands and feet away from rotating blades.
Never touch knives, blades, or blade discs during operation.
Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
Use only suitable screws and appropriate mounting materials.
If provided, use screws with locking lacquer or suitable screw locking.
Keep children, animals, and uninvolved persons away from the work area.
The robotic mower must not be operated if persons, especially children, or animals are in the work area.
In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
In case of injuries or accidents, seek medical assistance immediately.

Assembly Instructions

Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.

Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.

Check Before Operation

Are all screws fully inserted and tightened?
Is the blade disc correctly centered and securely fastened?
Are the knives correctly mounted?
Can movable knives move freely, if this is structurally intended?
Are there no visible damages?
Does the blade disc run freely and without grinding?

Maintenance and Inspection

Regularly check knives, blades, screws, and blade discs for wear and damage.
Immediately replace damaged or heavily worn parts.
Regularly clean the blade disc of grass residues, dirt, and deposits.
Do not use aggressive cleaning agents that may damage material or coating.
Use only compatible replacement parts and suitable mounting materials.

Storage and Disposal

Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.

Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.

Note on Original Accessories

CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.

Contact for Safety Questions, Complaints, or Accidents

For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:

Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de

Frequently asked questions

How quickly is the cutting disc for my TerraMow available?

The disc is in stock with us in Europe and ships out shortly after you place the order—so you don’t have to wait weeks for a shipment from overseas. With TerraMow, this is the practical difference: the mowing schedule keeps running instead of pausing in the middle of the growth phase.

Does a disc fit equally on the S800, S1200, V600 and V1000?

Yes. All four models of the S and V series use the same mowing disc mount, which is why each of the three versions is intended for all four. If you have two different TerraMow units in your garden, you still only need one replacement part type in your cabinet. Please check the model designation and the design of your old disc before purchasing.

Do all three TerraMow variants have the same protective cover?

No. The circumferential guard with a covered hub is carried exclusively by the 6-blade version. The 7- and 9-blade variants are built flat so that the more closely spaced blades can swing freely. This does not affect installation—all three mount on the same mount.

6, 7 or 9 blades—how do I decide?

Based on the cutting pattern you want. Six blades are the classic replacement and retain the familiar design with guard. Seven blades make one additional cut per revolution and catch stems that the six blades leave behind. Nine blades provide the finest cut in this series and the best mulching effect, because the clippings are broken into shorter pieces.

Do I have to screw the blades on myself?

No, the blades are pre-assembled—six for the 6-version, seven for the 7-version, and nine for the 9-version. You take the disc out of the packaging and place it directly on. The individual screwing of the blades is completely eliminated.

What tools do I need for the replacement?

None. Switch the robot off, carefully tip it over, remove the old mowing disc, and attach the new disc—done. Gloves are recommended; a screwdriver is not necessary. The complete swap is finished in just a few minutes, so the TerraMow can start its next round again the following morning.

How do I know in time that the old mowing disc needs to be replaced?

Dull blades tear the grass instead of cutting it: the blade tips fray and the cut edges turn brownish. In addition, you may notice an unsteady run in the cutting area, noticeable noises, or visible signs of wear on the disc. After contact with branches, stones, or roots, it’s worth doing an extra check—a bent disc runs unevenly and puts extra strain on the mowing unit.

Is this an original TerraMow part?

No, it’s a compatible cutting disc from CUT GUARD. It is precisely made for the mounting of the S800, S1200, V600, and V1000 and is designed for continuous operation in the mowing robot. The advantage over the original part is mainly availability: stock in the EU instead of long procurement routes—with pre-assembled blades and a short delivery time.

Cutting disc for TerraMow S800, S1200, V600 and V1000

Compatibility – TERRAMOW