9-blade cutting disc for Segway Navimow i105E, i108E & i205 AWD – Precision mowing disc with 9 blades
- 9-blade cutting disc for Segway Navimow i105E, i108E, and i205 AWD robotic mowers
- Precision cutting plate with 9 blades for a finer and more even cut
- Suitable as a replacement cutting disc in case of wear, damaged cutting disc, or declining mowing performance
- More cutting points support clean blade guidance during regular lawn maintenance
- Compatible replacement part for compatible Navimow i-Series models and the i205 AWD
incl. 9 blades
+
Compatibility – SEGWAY
Fits the following robotic mowers:
- ✓ Navimow i105E
- ✓ Navimow i108E
- ✓ Navimow i205 AWD
More clean cuts in your garden: With the 9-blade cutting disc from SEGWAY for Navimow, you’ll get your lawn back to the right height—without long rework.
When mowing takes longer than before
When the blades become dull, the Navimow pulls the grass “along” rather than cutting it cleanly—you can see it in uneven edges and individual blades of grass that are left standing. After some time, the sharpness decreases and the lawn looks unkempt. This 9 cutting disc for SEGWAY Navimow i105E, i108E & i205 AWD restores cutting performance and ensures that your robotic mower works evenly again. Nine blades mean: maximum cutting frequency, minimal blade remnants.
Fits your SEGWAY Navimow i105E, among others
The 9 cutting disc fits perfectly for SEGWAY Navimow i105E, Navimow i108E and Navimow i205 AWD. Swapping it on the mowing disc is quick—you don’t need any special tools; you can replace the cutting disc with the old one in no time.
From the box to the lawn in five minutes
The cutting disc works with 9 blades for a finer cutting pattern and consistent results across the entire mowing width. Many cutting edges leave no blade of grass behind—this is especially noticeable when you look closely. You get the 9 cutting disc as a complete replacement, so you don’t have to piece together individual parts. The swap on the precision mowing disc is done in just a few minutes, completely without tools.
Even wet grass doesn’t throw the disc off rhythm
With fresh blades, the cutting disc reduces the risk that grass clogs up on the mowing disc or that the cut “snags.” Wet grass likes to stick to the cutting zone and makes the disc sluggish—fresh blades get it turning freely again. This helps your Navimow handle everyday mowing more reliably—even when the grass is a bit denser. Fewer interruptions and a consistently well-kept lawn.
In summary
Top reviews
funktioniert perfekt auf meiner segway navimow i108e, der rasen sieht jetzt gleichmäßig ohne streifen aus. die montage ging schnell, nur die schrauben müssen wirklich sauber sitzen.
fungerar klockrent på min segway navimow i108e, och gräset blir jämnare utan ojämna kanter. bytte den efter slitage och den passar exakt.
Zamówiłem 9er-Messerscheibe do Segway Navimow i105E i wymiana zajęła mi ok. 20 minut. Jest dokładnie pod 9 klingen, a podczas montażu łatwo było dopasować elementy, bo wszystkie punkty mocowania pasują jak trzeba; po wymianie trawnik przestał łapać smugi.
Worked well on my Segway Navimow i108E. The cut looks more even, but the blades feel a bit fiddly to align.
I have used the 9er-Messerscheibe for my Segway Navimow i205 AWD, and the difference in cutting is significant. After trying two other brands that did not deliver the same precision, I am really satisfied with this one. The 9-blade design provides a smoother cut, and my grass looks much healthier. Installation was hassle-free, and I can already feel that my cutting efficiency has improved.
Remplacement facile sur mon Segway Navimow i205 AWD. Le résultat est plus net, mais il faut bien aligner la lame au premier montage.
J’ai remplacé la tondeuse à lame de ma Segway Navimow i205 AWD par cette 9er-Messerscheibe, et le résultat est plus régulier qu’avant, avec un gazon qui ne laisse pas de stries. Après avoir essayé deux autres marques, celle-ci m’a paru plus précise et les 9 lames donnent vraiment une coupe plus fine. L’installation a été simple, mais j’ai trouvé l’équilibrage un peu délicat la première fois, surtout quand on remonte le disque. Malgré ça, je la recommande si l’efficacité de coupe baisse.
Snelle levering en de 9-klingen schijf past goed op mijn Segway Navimow i205 AWD. Het resultaat is netter, maar het wisselen duurt iets langer dan verwacht.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How does the 9-blade cutting disc from CUT GUARD affect the battery life of my Segway Navimow i105E?
The 9-blade cutting disc from CUT GUARD provides a uniform and precise cutting pattern, which means that your robotic mower has to expend less energy to cut the grass. This can positively influence battery life, as the robot operates more efficiently and needs to be charged less often.
What are the advantages and disadvantages of the original cutting disc compared to the CUT GUARD retrofit disc for the Navimow i108E?
The original cutting disc typically offers guaranteed fit and quality, while the CUT GUARD retrofit disc with 9 blades can provide a finer cutting pattern and better lawn care. A disadvantage may be that the retrofit disc is not always covered by the manufacturer's warranty.
How can I tell that the cutting disc of my Segway Navimow i205 AWD needs to be replaced?
Signs of needing a replacement often include uneven cutting patterns, the grass looking frayed, or a noticeable decrease in mowing performance. An increased noise during mowing can also indicate worn blades.
What happens if I use an incompatible cutting disc on my Segway Navimow i105E?
If you use an incompatible cutting disc, it can lead to imbalance, which in turn can cause damage to the lawn mower robot. Additionally, the cutting quality may suffer, as the wrong disc cannot rotate properly and will degrade the mowing performance.
How quickly is the shipping of the CUT GUARD cutting disc and can I return it without any issues?
The shipping of the 9-piece cutting disc usually takes place within 1-3 business days. If you are not satisfied with the product, you can return it within 30 days without any issues, as long as it is in unused condition.