9-blade disc for WORX Vision Cloud WR312E, WR318E & WR330E – Precision mowing plate for 1200–3000 m²
- 9-blade cutting disc for WORX Landroid Vision Cloud WR312E, WR318E, and WR330E
- Suitable for large Vision Cloud models with 1200 m², 1800 m², and 3000 m² area performance
- More cutting points for a finer cut appearance during longer mowing times and larger lawns
- Suitable as a blade plate, mowing plate, cutting disc, or replacement mowing plate for compatible WORX models
- Supports stable blade rotation, even lawn care, and reliable mowing performance throughout the season
incl. 9 blades
+
Compatibility – WORX
Fits the following robotic mowers:
- ✓ Vision Cloud WR312E
- ✓ Vision Cloud WR318E
- ✓ Vision Cloud WR330E
At the latest when your WORX Vision Cloud WR312E/WR318E/WR330E no longer cuts cleanly through the grass, this 9-blade cutting disc brings back speed and clean cuts.
Dull blades can be seen immediately on the lawn
Dull blades tear the grass rather than cutting it cleanly—and that’s exactly when the lawn quickly becomes uneven. The blades are crushed instead of cut through, and the robotic mower needs longer to cover the same area. With the 9-blade cutting disc for WORX Vision Cloud WR312E, WR318E & WR330E, you ensure that your mowing disc is working again with fresh cutting performance and that the cut pattern becomes noticeably more even. The 9-blade setup is the finest cutting level in the range.
Fits your WORX Vision Cloud WR312E, etc.
The 9-blade cutting disc fits perfectly for WORX Vision Cloud WR312E, WR318E and WR330E. You can replace it on the mowing disc quickly—without any long fiddling or special tools.
Complete set for an immediate swap
The 9 blades deliver a finer cutting pattern because the grass is “cut” more often. The more cutting points work at the same time, the denser and more even the lawn looks—also up close. You get the cutting disc as a complete replacement for your precision mowing disc—ready to swap, so your WORX runs smoothly again. The replacement can be done in just a few minutes, completely without tools.
Grass blockages? Not with fresh blades
More cutting power per revolution helps reduce grass blockages around the mowing disc. Moist cuttings otherwise like to build up around the blades and slow down the rotation—sharp, freely running blades counteract this. This keeps operation more reliable—especially when the grass is sometimes thicker or the Vision Cloud needs to process a lot of area (1200–3000 m²). Fewer stops, more continuous mowing.
Quick summary
Top reviews
fits my wr330e, and the extra cutting points make the lawn look noticeably cleaner after longer runs. installs in minutes and holds up well so far.
Fits perfectly on my WR318E. Mowing performance is excellent and the cut is very even!
werkt prima, past naadloos op mijn worx vision cloud wr330e en geeft een netter snijbeeld na langere maaisessies. eenvoudig te vervangen en na een paar weken nog steeds strak.
Die 9-Klingen-Messerscheibe passt bei meinem WR318E wie erwartet und das Schnittbild ist deutlich gleichmäßiger. Der Wechsel ging bei mir in etwa 10 Minuten. Einziger Haken: Die Klingen sitzen anfangs etwas strammer als das Original, man muss beim Einbau genau arbeiten.
The product is fine, but the delivery took too long. The assembly was easy.
Den här 9-klingers messerskivan passade perfekt till min WR318E. Jag räknade faktiskt alla skärpunkter (9 st) och bytet tog runt 10–15 minuter, inklusive att lossa de 3 skruvarna och fästa allt igen. Efter första perioden ser gräset jämnare ut även när den gått längre mellan laddningarna.
Po sprawdzeniu kompatybilności wybrałam tę 9-klingową tarczę do WORX Landroid Vision Cloud WR330E. Po próbie dwóch innych marek ta wypada najlepiej: ma wyraźnie więcej punktów tnących i widać to na równomiernym cięciu po dłuższych cyklach, bez szarpania trawy. Montaż jest szybki, a po pierwszych kilku tygodniach pracy nie zauważyłam luzów ani spadku jakości.
Swapped this 9-blade cutting disc onto my WORX Vision Cloud WR318E this weekend, and it’s been a noticeable upgrade in how even the lawn looks. After a couple of mowing sessions, the cut lines are much finer, especially along the edge of my roughly 1,500 m² garden where my old blade would leave slight streaks. It fits the WR318E perfectly and took me about 10 minutes to replace—no fuss, just careful alignment. Definitely worth the 5 stars.
jeg købte den her til min worx vision cloud wr318e og den passer nemt uden bøvl. efter et par opladningscyklusser ser plænen pænere ud med et mere jævnt snit, og udskiftningen tog ca. 10 minutter. den eneste lille ting er, at klingen føles lidt mere “tæt” at montere end originalen, så man skal lige have hænderne rigtigt på.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that the 9-blade cutting disc for my WORX WR318E needs to be replaced?
A clear sign that the cutting disc on your WORX WR318E should be replaced is uneven cutting results or an unstable operation of the lawn mower robot. If you notice that the blades are visibly worn or damaged, you should also replace the cutting disc to maintain performance and lawn health.
What material properties does the cutting disc for the WORX models WR312E, WR318E, and WR330E have?
The 9-blade cutting disc for the WORX models WR312E, WR318E, and WR330E is made of high-quality, stainless steel, which ensures durability and resilience. This choice of material ensures that the disc remains durable even with frequent use over larger areas of 1200 to 3000 m² and provides optimal cutting performance.
Does the 9-blade cutting disc affect the battery life of my WORX WR330E?
Yes, the 9-blade cutting disc can affect the battery life of your WORX WR330E. With the increased number of cutting points, it allows for a finer cut, enabling the lawn mower robot to operate more efficiently. A well-maintained cutting disc ensures that the motor is not overloaded, which leads to longer battery life.
How long does shipping take for the cutting disc for my WORX WR312E, and is there a return option?
The shipping of the 9-blade cutting disc for your WORX WR312E usually takes place within 2-4 working days after the order is received. If you are not satisfied with the product, you can return it within 30 days, provided it is unused and in its original packaging.
What are the advantages and disadvantages of the original cutting disc from CUT GUARD compared to aftermarket discs for my WORX model?
The original cutting disc from CUT GUARD offers the optimal fit and material quality for your WORX robotic mower, ensuring reliable performance. Aftermarket discs may be cheaper, but the fit and cutting performance could vary, which could negatively affect the cut and the lifespan of the device.