9-blade cutting disc for MOVA 600 & MOVA 1000 robotic lawnmowers – Precision mowing plate against grass blockages
- 9-blade cutting disc for MOVA 600 and MOVA 1000 robotic mowers
- Finer cutting pattern due to more cutting points compared to simple cutting discs
- Open design supports the removal of grass clippings and reduces blockages at the cutting deck
- Precise replacement cutting disc for even blade guidance during regular lawn maintenance
- Suitable for users who want to upgrade their MOVA robotic mower for clean operation and long-lasting cutting performance
incl. 7 blades
+
Compatibility – MOVA
Fits the following robotic mowers:
- ✓ MOVA 600
- ✓ MOVA 1000
As soon as your MOVA 600 or MOVA 1000 suddenly starts mowing more sluggishly, the 9-blade cutting disc is exactly the quick boost for clean cuts again.
Frayed lawn despite a robotic mower? That’s why
Dull blades tear the grass rather than cutting it – the result: an uneven cut and more work for your robotic mower. The blades are crushed instead of severed, discolour at the tips, and the lawn looks unkempt. With the 9-blade cutting disc for MOVA 600 & MOVA 1000, you restore cutting performance and put an end to the “grass gets stuck” feeling. Nine sharp blades deliver the finest cutting pattern in this series – for a particularly dense, even lawn.
Fits perfectly for your MOVA MOVA 600, among others
The cutting disc is designed to fit MOVA 600 and MOVA 1000 – it sits on the mowing disc without any hassle. The swap is straightforward: remove the old cutting disc, attach the new cutting disc, done – no special tools required.
One set, one hand motion, done
The 9 blades ensure a more even cutting pattern because the grass is “gripped” more often and more finely. More cutting, more control over every blade of grass – even the critical look up close finds nothing to complain about. You get the 9-blade cutting disc as a complete replacement for your mowing disc – ready for the next job. The replacement takes just a few minutes and requires no tools: simply remove the old precision mowing disc and fit the new one.
More free grass flow instead of blockages
More cutting contact means fewer chances of grass blockages at the mowing disc. Especially with wet or long grass, clippings otherwise build up around the blades and slow down rotation—sharp, freely running blades counteract this. This way, your MOVA works more reliably, mows more evenly, and you have to intervene less often when wet or long grass clumps up. A smoother run and a lawn that stays well maintained throughout the season.
Your benefits at a glance
Top reviews
Wymieniłem tę 9‑klingową tarczę w moim MOVA 1000 i od razu widać różnicę: więcej punktów cięcia daje równy, gładki efekt bez podbierania trawy do krawędzi. Montaż zajął mi ok. 15 minut, bo trzeba przełożyć wszystkie 3 śruby mocujące; po przykręceniu pracuje stabilnie i nie blokuje się na mokrym trawniku.
Swapped this 9-blade disc on my MOVA 600. The cutting looks cleaner with more bite points, but the open design didn’t fully prevent clumping on wetter patches for me. Installation took about 20 minutes because I had to line up the three mounting screws carefully, and it feels a bit fiddly.
funktioniert bei meinem moxa 1000, mit den 9 klingen sieht der schnitt ordentlich aus. die lieferung dauerte aber länger als angegeben.
bytte 9-kling-tallriken i min mopa 600 och det blev tydligt jämnare klippning direkt, särskilt när gräset blir lite tjockt. jag gillade att den öppna konstruktionen hjälper så att gräsrester inte fastnar lika lätt, och bytet gick snabbt för mig (ca 10–15 min).
very satisfied with the performance, the trimmer is much more efficient and prevents blockages.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does shipping take for the CUT GUARD 9-blade mower disc for MOVA 600 and MOVA 1000?
Shipping of the CUT GUARD 9-blade mower disc usually takes place within 1-3 business days after payment is received. In Germany, we deliver directly to your home, and you will receive a tracking number for better tracking of your order.
What advantages does the 9-blade disc have on the cutting pattern and lawn health compared to 6-blade models?
The 9-blade mower disc for MOVA 600 and MOVA 1000 offers a finer and more even cutting pattern due to the increased number of cutting points. This contributes to lawn health, as fewer blades fray and the lawn grows overall healthier and denser.
What are the main differences between the original and the CUT GUARD retrofit disc?
The CUT GUARD retrofit disc features an open design that improves the removal of grass clippings and reduces blockages at the mowing plate. Compared to the original disc, it is often more cost-effective while maintaining the same cutting performance and precision.
How do I know when the blades of the 9-blade mower disc need to be replaced?
Signs that the blades need to be replaced include an uneven cutting pattern, when the lawn looks torn, and a noticeably reduced mowing performance. If the blades show visible wear or damage, it is time for a replacement.
How do I change the 9-blade mower disc and what tools do I need for it?
Changing the 9-blade mower disc for MOVA 600 and MOVA 1000 requires a Phillips screwdriver and possibly pliers. The replacement takes about 10-15 minutes: First, turn off the mower robot, then unscrew the old disc and mount the new one in reverse order.