9-blade cutting disc for ECOVACS GOAT O500 to G1-2000 – Precision mowing plate & blade plate
- 9-blade cutting disc for ECOVACS GOAT robotic mowers from O500 to G1-2000
- More cutting points for a finer cut and an even lawn surface
- Suitable as a replacement blade disc, mowing plate, or blade plate for compatible GOAT models
- Supports precise blade guidance during regular lawn care with the robotic mower
- Ideal for maintenance, replacement, and reliable cutting performance during the mowing season
incl. 6 blades
+
Compatibility – ECOVACS
Fits the following robotic mowers:
- ✓ GOAT O500
- ✓ GOAT O800
- ✓ GOAT O1200
- ✓ GOAT G1-800
- ✓ GOAT G1-2000
As soon as your ECOVACS GOAT no longer cuts cleanly through the grass, this 9-blade cutting disc will restore an even cut—without long trial and error.
So ECOVACS cuts cleanly again
Dull blades tear the grass rather than cutting it cleanly—exactly then the lawn quickly looks unsteady. The blades are crushed instead of severed, and the robotic mower needs longer for the same area. With the 9-blade cutting disc for ECOVACS GOAT O500 up to G1-2000, you rely on fresh cutting performance and a noticeably calmer mowing pattern. Nine sharp blades deliver the finest cutting result in this series—for a particularly dense, well-groomed lawn.
Fits your ECOVACS GOAT O500, among others
The 9-blade cutting disc fits perfectly for ECOVACS GOAT O500, GOAT O800, GOAT O1200, GOAT G1-800 and GOAT G1-2000. The swap on the mowing disc or blade plate is quick and doesn’t require any complicated modifications.
Ready to go from the very first minute
The 9 blades provide a finer cutting pattern because more cutting points work at the same time. The finer the cut, the more even and dense the lawn looks— even when you look closely. You get the cutting disc as a complete replacement, so you can install it right away and get back to mowing. The swap on the precision mowing disc is done in just a few minutes, completely without tools—ideal for the start of the season or when the blades start to wear down in the middle of the season.
Effortless mowing even in dense growth
More cutting power helps reduce grass blockages around the mowing disc—your ECOVACS GOAT stays more reliable in operation. Otherwise, damp clippings tend to build up around the blades and slow down rotation; sharp, freely running blades keep the grass moving. Result: fewer interruptions, more even mowing, and a clean run across the entire area—even when the grass grows back denser after rainy days.
Key details at a glance
Top reviews
passt gut auf meinen ecovacs goat (g1-2000), und die schnittfläche wirkt nach dem mähen deutlich gleichmäßiger. nur die befestigungsschraube war etwas fummelig beim ersten austausch.
Excellent cutting performance! Installation was quick, and my lawn looks fantastic now.
My ECOVACS GOAT did a great job after replacing it with this 9-blade cutting disc. Easy installation took me just a few minutes, and the effects are noticeable almost immediately, with a more even cut. The only thing that could be better is the packaging, which was not sturdy enough.
nieuwe 9-klingen-messerscheibe erop bij mijn ecovacs goat o500, montage was snel en het gras oogt veel egaler. hij snijdt netjes tot aan de rand, zonder gedoe tijdens het maaien.
I have a small garden of 300 square meters, and this 9-blade cutting disc has really made a difference for my ECOVACS GOAT! It cuts the grass so evenly, and I love that I no longer have to worry about uneven edges. It was easy to install, and I could immediately see how it improved the mowing result. A small downside was the delivery time, but it was worth it.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know when to replace the 9-blade cutting disc for my ECOVACS GOAT O500?
A replacement of the 9-blade cutting disc is necessary when you notice that the mowing result becomes irregular or the cut looks uneven. If your blades are visibly damaged or rounded, you should replace them. Another warning sign is if the lawn mower robot makes more noise than usual or has difficulty cutting.
What are the differences between the 6-blade and 9-blade cutting discs for the GOAT models?
The 9-blade cutting disc for the ECOVACS GOAT O500 to G1-2000 offers more cutting points than the 6-blade variant, which means it produces a finer and more even cut. While the 6-blade variant is suitable for smaller areas, the 9-blade variant is ideal for larger lawns where precision and a well-groomed appearance are important.
How can I replace the 9-blade cutting disc for my ECOVACS GOAT lawn mower robot?
To replace the 9-blade cutting disc, you will need a wrench and a screwdriver. First, turn off the lawn mower robot and remove the old disc by loosening the screws. Then, place the new cutting disc onto the housing and secure it again with the screws. The entire process should take no longer than 10-15 minutes.
How durable is the 9-blade cutting disc from CUT GUARD for the ECOVACS GOAT O500?
The durability of the 9-blade cutting disc depends on several factors, such as the intensity of use and the conditions of your lawn. On average, the disc can last 1 to 2 years with regular maintenance before a replacement is necessary. High-quality materials ensure that the blades remain sharp and need to be replaced less frequently.
How long does shipping take for the 9-blade cutting disc for the ECOVACS GOAT models, and can I return it?
Shipping of the 9-blade cutting disc usually takes place within 2-3 business days after ordering. If you are not satisfied with the product, you can return it within 30 days. Be sure to keep the disc in unused condition to ensure a refund.