7-blade cutting disc compatible with Husqvarna Automower 305, 310, 315X, 405, 410, 415, 435X & 535
- 7-blade cutting disc compatible with Husqvarna Automower 305, 310, 315X, 405, 410, 415, 435X and 535
- Replacement mowing disc for compatible Automower models with even blade guidance
- Suitable as a blade disc, mowing disc, or cutting disc for robotic mowers
- 7-blade design for precise lawn cutting and quiet blade rotation
- Practical spare part for maintenance, replacement, and reliable lawn care during the mowing season
incl. 6 blades
incl. 9 blades
+
+
Compatibility – HUSQVARNA
Fits the following robotic mowers:
- ✓ Automower 305
- ✓ Automower 310
- ✓ Automower 315X
- ✓ Automower 405
- ✓ Automower 410
- ✓ Automower 415
- ✓ Automower 435X
- ✓ Automower 535
Whenever your HUSQVARNA Automower 305 & Co. suddenly starts cutting more sluggishly, this 7-blade cutting disc gets your cut back up to speed.
When mowing takes longer than before
Dull blades tear the grass more than they cut it cleanly—you can see it quickly in uneven cutting edges. Dull original blades leave an unsteady, wavy lawn appearance. With the 7-blade cutting disc for HUSQVARNA Automower 305, 310, 315X, 405, 410, 415, 435X & 535, you restore cutting performance and ensure your lawn looks even again. With seven blades, the number of cutting points increases—and with it, the fineness of the cut.
Fits your HUSQVARNA Automower 305, among others
The 7-blade cutting disc fits perfectly for the HUSQVARNA Automower models 305, 310, 315X, 405, 410, 415, 435X and 535. The swap is done in no time: remove the old disc, attach the new one—no tool drama.
From the package to the lawn in five minutes
The 7 blades provide a finer cutting pattern because the grass is captured more evenly. With each additional blade, the hit rate on the blade of grass increases, and the lawn looks as if it’s been maintained with a nail clipper. You get the cutting disc as a complete set for the mowing disc—ready to be installed in your Automower. Swapping takes minutes: loosen the disc, fit the new one—there are no more steps.
Even wet grass doesn’t throw the disc off rhythm
With fresh cutting edges, the mowing disc is less prone to grass jams and blockages. Without sharp blades, wet clippings stick; with them, they pass through cleanly and the disc rotates freely. This helps your HUSQVARNA Automower run more reliably through everyday mowing and cut cleanly even when grass growth varies. Fewer stops, less rework, and a well-kept lawn.
In summary
Top reviews
Die 7-Klingen-Messerscheibe passt bei meinem Husqvarna 410 ohne große Diskussion, auch die Befestigung über die zentrale Schraube war wie erwartet. Der Austausch hat bei mir ca. 15–20 Minuten gedauert, danach lief die Rotation wieder gleichmäßig. Für den Preis hätte ich mir allerdings eine bessere Verpackung bzw. mehr Schutz für die Klingen gewünscht.
Works great with my Husqvarna 315X. Easy to install and cuts efficiently!
Die 7-Klingen-Messerscheibe passt für meinen Automower 310, Montage ging schnell. Delivery war okay, aber die Kanten rochen nach frischem Material.
past prima op mijn husqvarna automower 435x; na het wisselen draait alles weer gelijkmatig. 1 ster minder omdat de verpakking nogal krap was.
funkar direkt till min husqvarna automower 415, bytet tog bara runt 15 minuter. klingen roterar jämnt efter montering.
Szybko przyszło i pasuje do Husqvarna Automower 315X bez kombinowania. Po wymianie kosi równo, ale jedna z osłon była lekko przygięta.
Depuis que j’ai une petite pelouse d’environ 200 m², je fais l’entretien dès que le bruit change un peu. Cette 7-Klingen-Messerscheibe s’est montée facilement sur mon Husqvarna Automower 405 : j’ai juste remplacé l’ensemble de plateau et la rotation est redevenue bien régulière. Après 2-3 sessions, l’herbe est vraiment plus nette, sans accroche ni irrégularités sur les bords. En plus, ça a tenu toute la saison jusqu’ici, donc je suis très satisfait.
hurtigt skift ved min husqvarna automower 410, og de 7 klinger giver en pæn og jævn finish. passer uden ekstra tilpasning.
den her 7-klingers messerskive passer fint til min husqvarna automower 310, og det var ret nemt at skifte den i en travl uge. efter udskiftningen kører den mere jævnt, og græskanterne ser pænere ud efter et par klip. jeg oplevede ingen problemer med rotationen i brug.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does shipping take for the CUT GUARD 7-blade cutting disc for my Husqvarna Automower 315X?
Shipping for the CUT GUARD 7-blade cutting disc usually takes 2-4 business days. Orders placed by 2 PM are typically processed for delivery on the same day. If you are not satisfied with the product, you can return it within 30 days.
What impact does the 7-blade cutting disc have on the cutting quality and battery life of my Husqvarna Automower 405?
The 7-blade cutting disc ensures a precise and even cut, positively affecting lawn health. The optimal blade guidance reduces the energy consumption of the mowing robot, leading to longer battery life. A clean cut also promotes the growth of a healthy lawn.
How can I install the CUT GUARD 7-blade cutting disc on my Husqvarna Automower 410?
Changing the CUT GUARD 7-blade cutting disc can be done in a few steps: 1. Turn off the mowing robot and lay it on its side. 2. Remove the old cutting disc with a suitable screwdriver. 3. Place the new disc on and secure it with the appropriate screws. The entire process should take no longer than 10 minutes.
Are there common issues that users have with the CUT GUARD 7-blade cutting disc for the Husqvarna Automower 435X?
A common problem is uneven cutting quality, which is often due to incorrect installation or wear of the blades. Some users also report noises during the mowing process, which may indicate worn or damaged blades. Make sure to check the disc regularly and replace it if necessary.
Is the CUT GUARD 7-blade cutting disc compatible with my Husqvarna Automower 305?
Yes, the CUT GUARD 7-blade cutting disc is specifically designed for the Husqvarna Automower models 305, 310, 315X, 405, 410, 415, 435X, and 535. It ensures optimal performance and fits perfectly on these models to guarantee even cutting quality.