7-blade cutting disc compatible with Gardena Sileno Minimo – Robotic mower cutting plate & knife plate
- 7-blade cutting disc compatible with Gardena Sileno Minimo robotic mower
- Suitable as a mower blade disc, knife disc, or replacement cutting disc for compatible Sileno Minimo models
- Supports precise lawn cutting on small lawns and in compact gardens
- 7-blade design for even blade guidance and clean blade rotation
- Practical spare part for lawn robot maintenance, replacement, and reliable mowing performance during the season
incl. 6 blades
incl. 9 blades
+
+
Compatibility – GARDENA
Fits the following robotic mowers:
- ✓ Sileno Minimo
If your GARDENA Sileno Minimo suddenly cuts more sluggishly, the 7-blade cutting disc is exactly the quick boost for clean mowing paths again.
Say goodbye to uneven cut edges
Dull blades tear the grass rather than cutting it—this is immediately noticeable in uneven cut edges and longer mowing times. As the factory setup wears down, the cut loses precision—the lawn quickly looks neglected. With the 7-blade cutting disc for GARDENA Sileno Minimo, you restore cutting performance and achieve an even result again. Seven sharp blades provide more cutting points and a finer cut pattern.
Fits your GARDENA Sileno Minimo perfectly
The 7-blade cutting disc fits the GARDENA Sileno Minimo and sits exactly as intended for safe operation. Remove the old disc, attach the new one—this replacement takes just minutes and without any tool clutter.
The quick way to fresh blades
The 7 blades are designed for a finer cutting pattern, so the grass is cut more cleanly. Many cutting edges mean many clean cuts per revolution—visible in the even, lush lawn. You get the cutting disc as a complete replacement, so you don’t have to piece together individual parts. The swap on the mowing disc takes only a few minutes and works even without any technical know-how—unpack, mount, done.
Fewer stops, more mowed area
With fresh cutting edges, the tendency for grass blockages on the mowing disc is significantly reduced. Collected mowing debris acts like a brake on the disc—once freshly fitted, it runs smoothly again. Result: your GARDENA Sileno Minimo operates more reliably instead of constantly stopping or mowing unevenly. Fewer interruptions and a consistently well-kept lawn.
Your benefits at a glance
Top reviews
j’ai pris cette 7-klingen-messerscheibe pour mon gardena sileno minimo, et ça s’adapte bien sans galérer. le remplacement m’a pris une quinzaine de minutes, et la coupe est plus régulière, surtout au bord de la pelouse. petit bémol: l’un des clips est un peu dur à remettre la première fois.
After trying two other brands, I went with this 7-blade cutting disc for my Gardena Sileno Minimo, and it’s been spot on. The swap took about 15 minutes, and the mowing looks noticeably more even—especially along the edge where my grass usually gets ragged. After a couple of weeks, the blades still seem to rotate cleanly with no unusual vibration.
fits perfectly, the cut is now much more even than before. very satisfied!
werkt goed en past netjes op mijn gardena sileno minimo; het vervangen was in ongeveer 15 minuten. een klein minpuntje: één klemring zat wat stroef bij het vastzetten.
Good quality on the blades and the installation took about 15 minutes. The 7-blade design provides an even cutting result, which has significantly improved my lawn. The only downside was that one of the screws was a bit difficult to get in place.
fungerer virkelig godt til min gardena sileno minimo. jeg byttede måhtalleren på ca 15 minutter, og efter første runde så græsset mere jævnt ud, især i kanterne hvor det ellers blev lidt ujævnt. rotationen lyder også stabil, ingen mærkelig raslen eller vibration
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Does the 7-blade cutting disc from CUT GUARD affect the battery life of my Gardena Sileno Minimo?
Yes, the 7-blade cutting disc ensures an even and precise cutting performance, which optimizes energy consumption. When the blades are sharp and well-maintained, this can extend battery life, as the robotic mower operates more efficiently and requires less power to cut the grass.
What happens if I use the wrong cutting disc for my Gardena Sileno Minimo?
If you use an incompatible cutting disc, it can cause imbalance, which could damage the robotic mower. A wrong disc can also lead to a poor cutting result, and in the worst case, the motor or suspension of the robot could be damaged.
What are the advantages of the CUT GUARD cutting disc compared to the original disc for the Gardena Sileno Minimo?
The CUT GUARD cutting disc offers a cost-effective alternative to the original disc and impresses with its 7-blade technology, which promises better cutting and longer durability. However, the original disc may have advantages in terms of fit and manufacturer warranty.
How durable are the blades of the CUT GUARD cutting disc for the Gardena Sileno Minimo?
The blades of the 7-blade cutting disc from CUT GUARD are made of high-quality steel, which gives them good durability. With normal use and regular maintenance, the blades should last several months to a year before they need to be sharpened or replaced.
How do I install the CUT GUARD cutting disc on my Gardena Sileno Minimo?
Changing the cutting disc is simple: First, you need to turn off the lawn mower robot and remove the protective cover. Then you will need a wrench to loosen the old disc and install the new CUT GUARD cutting disc. This should take about 10-15 minutes.