7-Blade Cutting Disc for ECOVACS GOAT O500 to G1-2000 – Robotic Lawn Mower Cutting Plate & Blade Plate
- 7-Blade Cutting Disc for ECOVACS GOAT Robotic Lawn Mowers from O500 to G1-2000
- Compatible replacement cutting plate for precise lawn cutting and reliable mowing performance
- Suitable as a blade disc, blade plate, or cutting disc for compatible GOAT models
- Supports even blade rotation and a clean cut appearance in the garden
- Ideal for maintenance, replacement, and preparing the robotic lawn mower for the mowing season
incl. 7 blades
incl. 9 blades
+
+
Compatibility – ECOVACS
Fits the following robotic mowers:
- ✓ GOAT O500
- ✓ GOAT O800
- ✓ GOAT O1200
- ✓ GOAT G1-800
- ✓ GOAT G1-2000
If your ECOVACS GOAT no longer cuts cleanly through the grass, the 7-blade cutting disc for ECOVACS GOAT O500 to G1-2000 is exactly the quick boost you need for an even cut again.
Bent grass blades? Time for fresh blades
Dull blades tear the grass rather than cutting it cleanly—and then the lawn quickly looks uneven. After some time, the original blades lose their sharpness, the grass blades get crushed and discolored at the tips. With the 7-blade cutting disc for ECOVACS GOAT O500 to G1-2000, you restore cutting performance and give your mowing disc back the right “bite.” Seven sharp blades provide more cutting points and an even, clean result.
Fits your ECOVACS GOAT O500, among others
The 7-blade cutting disc fits ECOVACS GOAT O500, GOAT O800, GOAT O1200 as well as GOAT G1-800 and GOAT G1-2000. The swap is straightforward: remove the cutting disc/mowing disc, attach the new cutting disc—without any long, fiddly tool work.
The scope of delivery: everything you need for the replacement
The 7 blades work for a finer cutting pattern and help you cut more evenly even when the grass height varies. More cutting edges grip the blades more precisely and leave behind a dense, well-groomed lawn. You get the cutting disc as a complete set, so you don’t have to piece together individual parts. The replacement on the mowing disc takes only a few minutes and works even without any technical know-how—unpack, fit it on, you’re done.
More quietness in the cutting system
More clean cuts mean less “tugging” and thus less risk of grass blockages on the mowing disc. Otherwise, damp clippings and dense turf collect around the blades and slow down rotation—sharp, freely running blades counteract this. This way, your ECOVACS GOAT runs more reliably through the mowing operation—even when the grass is a bit denser. Fewer stops, less rework, and a smoother run.
Everything important at a glance
Top reviews
After trying two other brands, this 7-blade disc was the one that finally matched my ECOVACS GOAT G1-2000 properly. I replaced it with the 7-Klingen-Messerscheibe and noticed a more even cut within the first mowing cycle, and the motor sound stayed steady with no weird vibration. Installation took a bit of patience, but the fit was clearly right. Overall I’m satisfied and would buy again for seasonal maintenance.
beställde den här 7-klingade messerscheibe till min ecovacs goat (g1-2000) och den passade faktiskt direkt när jag jämförde med den gamla. klippningen blev jämnare, men jag tycker monteringen var lite bökig och tog längre tid än jag trodde, så därför bara 3 stjärnor.
After testing two other brands, I can say that this 7-blade cutting disc really meets the mark. It provides an even and neat cut and fits perfectly on my ECOVACS GOAT. The only thing I noticed was that the installation could be a bit clumsy and time-consuming. Despite this, I am satisfied with the performance and the choice of materials.
Die Messerscheibe passt sauber an meinen ECOVACS GOAT (G1-2000). Der Schnitt ist gleichmäßig und die 7 Klingen laufen ruhig, nur die Montage ist etwas fummelig.
Past perfect op mijn ECOVACS GOAT (G1-2000). Na de wissel heb ik een strak, gelijkmatig maaibeeld en geen rare trillingen meer.
Szybko dotarło i pasowało bez problemu do mojego ECOVACS GOAT (G1-2000). Po wymianie mam równe cięcie i stabilną pracę, nie wibruje tak jak wcześniej.
This replacement blade works perfectly with my ECOVACS GOAT. The cut is precise and the quality is superior. I appreciate the ease of installation. Very satisfied with my purchase!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How long does shipping take for the 7-blade cutting disc for the ECOVACS GOAT robotic mower?
Shipping of the 7-blade cutting disc usually takes place within 2-4 business days. We strive to process your order as quickly as possible and provide you with a tracking number so you can monitor the status of your delivery at any time.
What is the difference between the 7-blade cutting disc and other variants for ECOVACS GOAT?
The 7-blade cutting disc offers an optimal balance between cutting quality and efficiency. In comparison, 6-blade models usually have lower cutting performance, while 9-blade models are faster but may require more battery. For well-maintained lawns, the 7-blade variant is the ideal choice.
How does the 7-blade cutting disc affect the battery life of my ECOVACS GOAT robotic mower?
A well-maintained 7-blade cutting disc ensures an even cut and reduces resistance while mowing, which extends battery life. Unlike damaged or unbalanced cutting discs that consume more energy, a new cutting disc contributes to a more efficient use of the battery.
Does the 7-blade cutting disc really fit my ECOVACS GOAT O500?
Yes, the 7-blade cutting disc is compatible with models ECOVACS GOAT O500 to G1-2000. Please check that your robotic mower is within this model range to ensure that the cutting disc fits optimally.
What happens if I use the wrong blade disc for my ECOVACS GOAT lawn mower robot?
An incorrect or incompatible blade disc can lead to an imbalance, which affects the performance of the lawn mower robot. This can not only result in an inaccurate cutting pattern but also cause damage to the device, such as excessive wear on the motor and drive system.