60 replacement blades compatible with CUT GUARD blade discs & Segway Navimow
- 60 replacement blades for robotic lawnmowers in the size of 35 x 18 x 0.8 mm
- Compatible with CUT GUARD cutting discs and suitable Segway Navimow robotic lawnmowers
- Suitable for Segway Navimow H500E, H800E, H1500E, H3000E, i105E, i108E, X315E, X330E, X350E, and X390E
- Stainless steel blades for a clean lawn cut, precise mowing performance, and reliable use throughout the season
- Bulk pack including matching PH2 screws with a special head for secure fit on the cutting disc
Compatibility
Fits the following robotic mowers:
- ✓ Alle CUT GUARD Messerscheiben
- ✓ Segway Navimow (Original-Mähteller)
At the latest when your CUT GUARD or Segway Navimow jerks while mowing or tears the grass rather than cutting it cleanly, these 60 replacement blades will get you back up to speed and deliver clean edges.
Frayed blades? Time for fresh blades
Dull blades quickly turn “mowing” into “pulling”: the grass is cut unevenly, stays where it is, and the mowing disc works against the clock. After a while, the original blades lose their sharpness and put extra strain on the motor. With the 60 replacement blades for CUT GUARD mowing discs & Segway Navimow, you get fresh cutting edges that go through the grass evenly again. A large stockpile—so you’re ready for multiple blade changes and the entire season.
Fits perfectly for all CUT GUARD mowing discs, Segway Navimow (original mowing disc)
The 60 replacement blades are designed for all CUT GUARD cutting discs as well as for Segway Navimow (original mowing discs). You can swap the cutting disc/mowing disc parts quickly and easily—no long tool drama.
What’s included: everything for the swap
The 60 blades provide a finer cutting pattern, so your lawn looks more even and fewer “stubble” patches remain. Fresh blades cut cleanly through the grass blades instead of crushing them—your lawn rewards you with a rich green. You receive the replacement blades as a set, so you don’t have to reorder again for the next season. The blade change takes just a few minutes and requires no special tools.
More smooth operation in the cutting system
With sharp blades, the tendency for grass blockages on the mowing disc is significantly reduced. Otherwise, damp clippings collect around the blades and slow down the rotation—fresh, sharp blades keep the flow of grass moving. Result: reliable operation, even mowing paths, and fewer interruptions, so your Segway Navimow or CUT GUARD can keep going. Fewer stops and a consistently well-maintained lawn throughout the season.
Everything important at a glance
Top reviews
funktioniert einwandfrei am segway navimow, die 60 klingen passen exakt zur cut guard messerscheibe. die edelstahlklingen liefern nach dem tausch einen sauberen schnitt, montage mit ph2-schrauben ging schnell.
Jeg har nu skiftet knivene på min Navimow, og de 60 erstatningsklinger passer præcist til Cut Guard-messeskiven. Jeg brugte PH2-skruerne (specialhoved), og der var 0 problemer med at få dem sikkert i gear; hele udskiftningen tog cirka 20-25 minutter pr. sektion. Rustfri klinger giver et pænt, ensartet snit efter første kørsel.
Bought these for my Segway Navimow and they fit the CUT GUARD discs exactly. Stainless blades cut cleanly, but one blade arrived with a tiny scratch.
wymieniłem krawędzie w swoim navimow i te 60 klingen pasują do cut guard bez kombinowania, rozmiar też wygląda sensownie (35 x 18 x 0,8 mm). do kompletu są śrubki ph2 z tym specjalnym łbem, więc montaż idzie sprawnie, ale opakowanie przyszło trochę „luźno” i jedna krawędź miała minimalne zadrapanie.
klingene passar exakt till cut guard på min segway navimow, och de rostfria ersättningsblad ger ett jämnt snitt efter första körningen. jag uppskattade att det följde med ph2-skruvar med specialhuvud så monteringen gick snabbt och sitter stadigt.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that the blades of my CUT GUARD cutting disc need to be replaced?
A clear indication of worn blades is an uneven cutting edge in the lawn or frequent clogging of the lawn mower robot. If you notice that your Segway Navimow lawn mower robot, such as the H800E model, is having difficulty cutting through thick grass, the blades should be checked and possibly replaced. Visible damage or rust on the blades is also a clear warning sign.
What problems can occur if I use the wrong cutting disc for my Segway Navimow H1500E?
Using an incompatible cutting disc can lead to an imbalance that can damage the lawn mower robot. This can cause motors to overheat or other mechanical parts to wear out. It is important to use only compatible CUT GUARD cutting discs to ensure the safety and efficiency of your lawn mower robot.
What are the advantages and disadvantages of original versus aftermarket CUT GUARD cutting discs?
One of the advantages of original CUT GUARD cutting discs is the guaranteed fit as well as the quality of the materials used. Aftermarket discs, on the other hand, can often be cheaper, but there is a risk that they do not provide the same performance or durability. For models like the Segway Navimow H3000E, original parts are recommended to achieve the best results.
How do the blade variants (6/7/9) differ for my Segway Navimow lawn mower robot?
The blade variants differ in the number of cutting edges, which affects mowing in different lawn conditions. Models like the H330E benefit from 9 blades for more effective lawn control, while 6 blades are perfectly sufficient for less demanding lawns. The choice largely depends on the type and density of the grass.
How long does the shipping of my 60 replacement blades for CUT GUARD cutting discs take?
The shipping of the 60 replacement blades usually takes place within 2-5 business days after ordering. We also offer a hassle-free return option within 30 days if the blades do not meet expectations or are not compatible. This way, you can be sure that you are getting the right parts for your Segway Navimow robotic mower.