6-blade disc for WORX Landroid M500, M700, WR167E, WR141E & Vision M600 – Mowing plate with adapter
- 6-blade cutting disc for WORX Landroid M500, M700, WR167E, WR141E and Vision M600
- Complete robotic lawnmower cutting plate with 6 blades and adapter for compatible WORX models
- Suitable as a replacement cutting plate, cutting disc or blade disc for wear and maintenance
- Supports even blade guidance for a clean and precise lawn cut
- Proven quality for replacement, repair, and reliable lawn care during the mowing season
incl. 6 blades
incl. 7 blades
+
+
Compatibility – WORX
Fits the following robotic mowers:
- ✓ Landroid M500
- ✓ Landroid M700
- ✓ Landroid WR167E
- ✓ Landroid WR141E
- ✓ Vision M600
Sharp cuts instead of tough lawn strips: With the 6-fold cutting disc for WORX Landroid M500, M700, WR167E, WR141E & Vision M600, your mowing disc runs smoothly again.
A fresh-cut look again, like it’s just been done by the gardener
When the blades become dull, the WORX Landroid tears at the grass rather than cutting it cleanly—this quickly looks uneven and costs time. Dull blades also put extra strain on the motor, because it has to work against the resistance. This 6-fold cutting disc for WORX Landroid M500, M700, WR167E, WR141E & Vision M600 restores cutting performance and ensures your lawn is mowed evenly again. Six freshly sharpened blades provide a clean, dense cutting pattern.
Fits perfectly for your WORX Landroid M500 and more
The cutting disc is compatible with WORX Landroid M500, Landroid M700, WR167E, WR141E as well as Vision M600 – with an adapter for the correct fit on the mowing disc. You can swap it easily, without any tool hassle, and you’ll be ready to use it again in no time.
Everything you need for a quick swap
The 6-way cutting disc works with multiple blades for a finer cutting pattern – so the grass is cut more evenly. Sharp blades cut through the stems precisely instead of crushing them, for a dense and well-groomed lawn. You get the cutting disc including adapter, so the replacement fits right away – no searching for additional parts. The swap on the mowing disc can be done in just a few minutes and completely without tools.
For a freely running mowing disc
Dull blades promote grass blockages on the mowing disc—the result is frequent stops and sluggish operation. Damp clippings collect around the blades and slow down the rotation until, in the worst case, the robot comes to a standstill. With the new cutting disc, your WORX cuts more reliably so that less gets stuck and your Landroid keeps going. Fewer interruptions, less rework, and a consistently well-maintained lawn.
The most important points
Top reviews
Passer perfekt til min WORX Landroid M500. 6 klinger giver et jævnt snit, og adapteren sidder uden besvær.
Very easy to install and the cuts are clean, my robot mows like new now!
Po dokładnym sprawdzeniu kompatybilności z moim WORX Landroid (M700) zamówiłam 6-fach Messerscheibe i pasuje bez kombinowania – adapter siedzi równo, a krawędzie tnące wyglądają solidnie. Po tygodniu pracy widać równy, czysty tor cięcia, szczególnie na lekko nierównym trawniku. Po testach dwóch innych marek, które dawały wyraźnie gorsze wyrzucanie trawy, ta wymiana naprawdę robi różnicę. Jedyne, co musiałam dopasować, to czasowo ustawienia w harmonogramie, bo po wymianie robot ruszył od razu szybciej z koszeniem.
Werkt goed op mijn WORX Landroid M700. Het snijdt netjes en de adapter past strak, maar de verpakking was wat rommelig bij aankomst.
hab die 6-fach messerscheibe für meinen worx landroid m500 geholt und sie passt wirklich sauber: adapter sitzt plan und die 6 klingen drehen gleichmäßig. nach dem wechsel hatte ich wieder einen ordentlich gleichmäßigen schnitt, statt dieses leicht zerrupften randes. wenn man den alten mâhteller abnimmt, dauert die montage auch nur ein paar minuten.
Works as expected, but delivery took longer than anticipated.
Incredibly good quality blade! My Worx mower now cuts much more evenly and faster. Fits perfectly and the installation was super easy. Completely satisfied!
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
Is the 6-blade cutting disc from CUT GUARD compatible with my WORX Landroid M500?
Yes, the 6-blade cutting disc from CUT GUARD is specifically designed for the WORX Landroid M500, M700, WR167E, WR141E, and Vision M600 models. They fit perfectly and ensure optimal mowing performance when the old cutting disc is worn out.
What are the advantages of the CUT GUARD cutting disc compared to an original disc?
The CUT GUARD cutting disc offers excellent cutting performance and is more cost-effective than the original parts. It has the same quality and functionality, which means you don't have to worry about sacrificing mowing performance.
How long does shipping of the CUT GUARD cutting disc take, and can I return it easily?
Shipping of the CUT GUARD cutting disc usually takes place within 1-3 business days. If you are not satisfied with the product, you can return it within 30 days, provided it is unused and in its original packaging.
What happens if I use the wrong cutting disc for my robotic mower?
Using the wrong or incompatible cutting disc can lead to an imbalance that may cause damage to the robotic mower. This could overload the motors and lead to premature wear or even failure of the device.
How durable is the 6-blade cutting disc from CUT GUARD compared to other brands?
The 6-blade cutting disc from CUT GUARD is made from robust material designed for long-term use. Compared to other brands, it offers excellent durability and remains sharp even with frequent use, ensuring a clean lawn cut.