2x cutting disc compatible with ECOVACS GOAT A1600 RTK, A2500 RTK, A3000 LiDAR, A1600 & A3000 LiDAR PRO
- 2x cutting disc compatible with ECOVACS GOAT A-series mowing robots
- Suitable for GOAT A1600 RTK, A2500 RTK, A3000 LiDAR, A1600 LiDAR PRO and A3000 LiDAR PRO
- Suitable as a mowing disc, blade plate, or cutting disc for compatible ECOVACS GOAT models
- Practical 2-pack for mowing robots with two cutting units and regular lawn care
- Supports stable blade guidance, smooth blade rotation, and an even lawn cut
Compatibility – ECOVACS
Fits the following robotic mowers:
- ✓ GOAT A1600 RTK
- ✓ GOAT A2500 RTK
- ✓ GOAT A3000 LiDAR
- ✓ GOAT A1600 LiDAR PRO
- ✓ GOAT A3000 LiDAR PRO
With 2 new cutting discs for your ECOVACS GOAT, you’ll get clean cuts again instead of tough blades and areas of lawn that won’t stay down.
Dull blades are noticeable on the lawn right away
When the blades on your ECOVACS GOAT A1600 RTK, A2500 RTK or A3000 LiDAR become dull, the mowing disc no longer pulls the grass through properly—the result is uneven tracks and more rework. After some time, the original blades lose their sharpness. These 2x cutting discs restore cutting performance and ensure that your GOAT drives evenly over the lawn again. As a 2-pack, you have replacements ready for both sides or a spare on hand.
Fits your ECOVACS GOAT A1600 RTK, among others, perfectly
The cutting discs fit perfectly for ECOVACS GOAT A1600 RTK, A2500 RTK, A3000 LiDAR as well as for GOAT A1600 LiDAR PRO and GOAT A3000 LiDAR PRO. You can swap them quickly on the mowing disc—without any fiddling with tools—so your robot is ready for use again in no time.
Complete set for a direct swap
The new cutting discs provide a finer cutting pattern because the edges work cleanly again. Instead of shredding the stems, fresh blades cut them cleanly—so the turf stays healthy. The package includes 2 cutting discs—ideal if you want to renew both sides right away or have a spare for the next season. Swapping on the mowing disc takes just a few minutes and requires no tools.
Grass clogs? Not with fresh blades
Sharp blades reduce grass clogs on the mowing disc, because the cut material is removed cleanly. Otherwise, damp material sticks around the blades and slows down rotation—sharp, freely moving blades counteract this. This helps your ECOVACS GOAT run more reliably, stay more consistent in its track, and cut even in denser growth without unnecessary interruptions. Fewer stops and a consistently well-kept lawn.
Quick summary
Top reviews
Passar exakt till min ECOVACS GOAT A3000 LiDAR PRO. Inga Vibrationer, klipper jämnt och fint efter bytet.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How do I know that I need to replace the cutting disc for my ECOVACS GOAT A1600 RTK?
If you notice that the robotic mower is mowing unevenly or leaving behind patches of grass, this can be a sign that the cutting disc is worn out. Increased noise during mowing or visible damage to the blades also indicate that a replacement is necessary.
What happens if I use an incompatible cutting disc on my ECOVACS GOAT A3000 LiDAR PRO?
Using an incompatible cutting disc can cause imbalance, which not only reduces mowing performance but can also lead to damage to the motor shaft and the suspension. In the long run, this can result in costly repairs.
How long does it take to install the cutting disc on my GOAT A2500 RTK?
Installing the cutting disc usually takes 10 to 15 minutes. You only need a Phillips screwdriver to remove the old disc and simply attach the new cutting disc. Make sure the robotic mower is switched off beforehand.
How quickly can I expect delivery of the cutting disc for my ECOVACS GOAT A1600 LiDAR PRO?
We ship the cutting disc within 1–3 business days after receipt of your order. If the product doesn’t meet your expectations, you can return it without any hassle within 30 days. Our customer service is available to you at any time.
Are the cutting discs compatible with all ECOVACS GOAT A models?
Yes, the cutting discs are specifically designed for the GOAT A1600 RTK, A2500 RTK, A3000 LiDAR, A1600 LiDAR PRO, and A3000 LiDAR PRO models. Please check the model number of your robotic mower to ensure compatibility.