2-piece set of 9-blade cutting discs for Mammotion LUBA 1 AWD & LUBA 2 AWD – Robotic lawnmower cutting plate & knife plate
- 2-piece set of 9-blade cutting discs for Mammotion LUBA 1 AWD and LUBA 2 AWD robotic lawnmowers
- Suitable as a replacement cutting plate or knife plate for maintenance, replacement, and repair
- 9-blade design for a fine, precise, and even lawn cut
- Durable and safe solution for worn or damaged cutting discs
- Practical set for robotic lawnmowers with two cutting areas – ideal for preparing for the mowing season
incl. 9 blades
+
Compatibility – Mammotion
Fits the following robotic mowers:
- ✓ LUBA 1 AWD
- ✓ LUBA 2 AWD
If your Mammotion LUBA 1 AWD or LUBA 2 AWD no longer cuts cleanly through the grass, this 2-piece set of 9-blade cutting disc is the quick fix for getting an even cut again.
No more uneven cut edges
Dull blades tear the grass rather than cutting it cleanly – and that’s exactly when the lawn quickly looks “torn up.” The blades discolor at the tips, and the robotic mower takes longer to cover the same area. With the 9-blade cutting disc for Mammotion LUBA 1 AWD & LUBA 2 AWD, you restore cutting performance and give your LUBA back the right bite. Nine sharp blades deliver the finest cut finish of this series – and as a 2-pack, you have replacement blades ready right away.
Fits your Mammotion LUBA 1 AWD, etc.
The 2-pack 9-blade cutting disc fits Mammotion LUBA 1 AWD and LUBA 2 AWD – no guesswork. You can swap the cutting disc on the mowing disc quickly and easily; you usually don’t need any tools for long.
The quick way to fresh blades
The 9-blade setup delivers an especially fine cutting pattern, so your lawn looks even and dense. As the number of blades increases, precision grows too— even up close, the pattern stays flawless. In the package, you get a 2-pack, so you can swap right away or keep a spare on hand. The swap on the mowing disc is done in just a few minutes, completely without tools—ideal for the start of the season or when blades start to wear down mid-season.
Fewer stops, more mowed area
With fresh cutting edges, the Mowing disc runs more reliably and the risk of grass blockages drops noticeably. Especially in damp weather, clippings otherwise like to collect around the blades and slow down the rotation—sharp, freely running blades keep the grass moving. This way, your Mammotion LUBA stays calmer in operation even in denser growth and cuts through instead of struggling. Fewer stops, less rework, and a consistently well-kept lawn.
Your benefits at a glance
Top reviews
monterade 9-klingorna på min mammotion luba 2 awd och passformen var helt rätt. efter bytet blev klippningen jämn och fin.
The set arrived quickly and everything fit perfectly. My robots now cut the lawns much better, but they could be a bit more durable.
Für meinen Mammotion LUBA 1 AWD habe ich das 2er-Set gewechselt, passend zu den 9-Klingen-Mähtellern und mit den originalen Schrauben befestigt. Die Montage ging insgesamt recht zügig, aber beim zweiten Mähbereich musste ich eine Schraube einmal nachziehen, bevor alles sauber saß. Danach wurde der Schnitt wieder gleichmäßiger, deshalb 4/5.
The blades are easy to install and have made my robotic mower fully operational again. The grass cut is now much more even and precise. A great set for the mowing season!
monté le set sur mon mammotion luba 2 awd en gardant les vis d’origine; ça s’emboîte parfaitement. la coupe est bien plus régulière, exactement ce que je voulais.
de 9-klingen messerschijven passen precies op mijn luba 2 awd en vervangen was snel. na het wisselen een keurig gelijkmatige snede.
Bought the 2er set for my Mammotion LUBA 1 AWD and the 9 blades went on without any fuss, using the existing screws. Swapping them took about 15–20 minutes per deck, and the cut looks more even. The only downside was the packaging—one of the discs arrived with a small chip on the edge.
Efter at have prøvet to andre brands med blandet pasform, endte jeg med dette 2er sæt til min Mammotion LUBA 1 AWD. Det passede direkte til måltallet og klingenes fastgørelse, og jeg kunne udskifte uden at justere noget ekstra—jeg brugte de originale skruer. Efter første klip ser græsset mere ensartet ud i kanterne, og den fine 9-klinge-effekt kan mærkes. Jeg giver 5 stjerner for kvaliteten, og det var netop det, jeg manglede til sæsonstart.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
How durable are the 9-blade cutting discs for the Mammotion LUBA 1 AWD and LUBA 2 AWD?
The 9-blade cutting discs are made of high-quality stainless steel, which increases their durability. With regular maintenance and depending on lawn conditions, they can last several seasons before replacement is necessary.
What problems can occur when using the CUT GUARD cutting discs with the LUBA robotic mowers?
Common problems reported by users include uneven cutting and frequent jamming of the blades, usually caused by dirt or damage to the cutting discs. It is important to regularly check the cutting discs for wear to ensure optimal mowing results.
What are the advantages of the CUT GUARD discs compared to original spare parts for the Mammotion LUBA?
CUT GUARD cutting discs offer a cost-effective alternative to original parts without compromising on quality. They are specifically designed for the LUBA models and ensure precise cutting performance while being durable and robust.
What happens if I use an incompatible cutting disc for my Mammotion LUBA 1 AWD?
Using an incompatible cutting disc can lead to imbalance, which can overload the motor of the robotic mower. This can not only cause damage to the blades themselves but also mechanically impair the entire lawn mower.
How can I easily mount the 9-blade cutting discs on my Mammotion LUBA 2 AWD?
Replacing the cutting discs requires a Phillips screwdriver and typically takes about 10-15 minutes. First, the robotic mower should be disconnected from the power supply, then the old discs are removed with the screwdriver, and the new discs are simply placed on and tightened.