2 pieces of blade disc with 6 blades for Mammotion LUBA 1 AWD and LUBA 2 AWD up to model year 2024 – Blade disc set with 12 blades
- 2 pieces of blade disc for Mammotion LUBA 1 AWD and LUBA 2 AWD up to model year 2024
- Complete blade disc set with 18 blades for replacement on the robotic lawnmower
- Suitable as a replacement mowing disc in case of wear, damage, or declining cutting quality
- Supports precise, even, and clean lawn cutting during the mowing season
- Practical solution for maintenance, repair, and reliable care of the cutting system
incl. 6 blades
+
Compatibility – Mammotion
Fits the following robotic mowers:
- ✓ LUBA 1 AWD
- ✓ LUBA 2 AWD (bis Baujahr 2024)
Whenever your Mammotion LUBA 1 AWD or LUBA 2 AWD no longer cuts cleanly, this 2-piece cutting disc (6 blades) will get your mowing back on track.
Frayed blades? Time for fresh blades
Dull blades tear the grass rather than cutting it cleanly—and that’s exactly when the lawn quickly starts looking uneven. Over time, the original blades lose their sharpness, and the robotic mower has to work longer to achieve the same result. With the blade plate set with 12 blades for Mammotion LUBA 1 AWD and LUBA 2 AWD (up to model year 2024), you restore cutting performance and make sure your LUBA mows again “as usual.” Two complete cutting discs mean: swap immediately and have a spare ready in the cupboard.
Fits perfectly for your Mammotion LUBA 1 AWD, etc.
The 2 cutting discs, each with 6 blades, fit Mammotion LUBA 1 AWD and LUBA 2 AWD up to model year 2024. The swap is quick and easy: remove the old disc, attach the new one—no searching for tools required.
The package contents: everything for the swap
The 6 blades per cutting disc provide a finer cutting pattern, so the grass looks more even and is cut cleanly. Sharp blades cut through the stems precisely instead of crushing them—your lawn stays dense and well-groomed. You get a set with 2 cutting discs—a total of 12 blades—so you can swap right away or store them in advance. This way, you’re equipped for the entire season and don’t have to reorder every time there’s wear. The replacement takes just a few minutes, completely without tools.
More quiet operation in the cutting system
With fresh cutting edges, the tendency for grass clippings to cause blockages on the mowing disc is significantly reduced. Moist cuttings otherwise like to build up around the blades and slow down rotation—an idling mowing disc with sharp blades counteracts this. Result: your Mammotion LUBA runs more reliably, stays in the cutting flow, and you need to intervene less. Especially with dense or damp lawn, you can see just how much calmer the robot with fresh blades guides its paths.
Everything important at a glance
Top reviews
Past perfect voor mijn Mammotion LUBA 1 AWD (bouwjaar 2024). Ik merkte meteen dat het gras netter wordt, vooral op wat ruigere plekken. Enige minpuntje: één schijf voelde na het uitpakken wat ruwer aan, maar na montage liep alles prima.
Szybka dostawa i zestaw pasuje bez problemu do LUBA 2 AWD do 2024. Po wymianie cięcie jest równo i czuć wyraźną poprawę pracy noży.
After trying two other brands, these 6-blade cutter discs for the Mammotion LUBA 1 AWD/LUBA 2 AWD up to 2024 were the first that matched the fit and balance I expected. I ordered two sets so I could rotate blades during heavy growth, and the swap was straightforward using the existing mount points. The cut looks cleaner and more even within a week compared with my previous replacements, especially on slightly damp grass. Packaging was solid and nothing arrived bent.
habe die 2 messerscheiben (je 6 klingen) für meinen lUBA 2 awd bis 2024 gekauft und sie passen wirklich 1:1 zum austausch. nach dem wechsel sieht der rasen deutlich gleichmäßiger aus, auch wenn das gras mal etwas feuchter ist. Delivery kam gut verpackt an, und das swapping ging ohne großes gefummel.
j’ai pris ces 2 messerscheiben pour mon mammotion luba 2 awd (jusqu’à 2024) et ça se monte vraiment facilement, on retrouve les mêmes points de fixation que l’ancien. après le changement, la coupe est plus régulière, surtout sur l’herbe un peu haute. petit bémol: j’aurais aimé que les lames soient un peu plus faciles à remettre à la bonne orientation.
Szybka dostawa, a te 2 zestawy (po 6 klingen) pasują 1:1 do mojego Mammotion LUBA 2 AWD do 2024. Po wymianie trawnik wygląda równo, ale wymiana ostrza wymaga chwili na właściwe ustawienie.
Snabb leverans och de 2 messerskivorna passade precis till min Mammotion LUBA 1 AWD från 2024. Efter bytet blev klippningen jämnare, särskilt i kanterna där den tidigare släpade.
Schnell leveret, og de 2 messerskiver passede 1:1 til min Mammotion LUBA 2 AWD (indtil 2024). Efter udskiftningen er klipningen blevet mere jævn, især på kanterne.
The reasonable knives work well but could have been a bit cheaper. Easy to change.
Write a review
CUT GUARD Assembly Instructions
General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic mowers.
Note
These instructions generally apply to compatible cutting discs, replacement blades, and blades from CUT GUARD.
They do not refer to a specific model or version. Always additionally refer to the operating manual of your robotic mower.
Important Safety Notice
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Always wear appropriate protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.
1. General Safety Instructions
- The operator is responsible for accidents, injuries, and damages caused to other persons or their property.
- Keep children, animals, and uninvolved persons away during work and operation of the robotic mower.
- Never touch the cutting disc or the knives while they are still moving.
- Always turn off the robotic mower completely before performing work on the cutting disc or the knives.
- Remove the battery if possible or disconnect the device from the power supply.
- Always wear appropriate protective gloves.
- Do not use damaged, bent, heavily worn, or corroded knives, screws, or cutting discs.
- Regularly check the condition of the knives, fastening screws, and the cutting disc.
2. Required Tools and Materials
- Suitable screwdriver or bit, matching the screws used.
- Protective gloves.
- New or tested fastening screws.
- CUT GUARD cutting disc, replacement blades, or blades.
- Optional: soft surface for safely placing the robotic mower.
Important
Only use suitable screws and appropriate mounting materials.
If specified by the manufacturer or included in the delivery, use screws with locking lacquer
or suitable screw locking.
3. Preparation
- Stop the robotic mower completely.
- Turn off the device according to the operating manual.
- Remove the battery if possible.
- Wait until the cutting disc has completely come to a stop.
- Carefully turn the robotic mower upside down and place it on a stable, soft surface.
- Check the work area for cleanliness and adequate lighting.
4. Disassembly of the Existing Cutting Disc
- Loosen the fastening screws of the existing cutting disc.
- Completely remove the screws and set them aside safely.
- Carefully remove the existing cutting disc from the knife holder.
- Clean the knife holder of grass clippings, dirt, and debris.
- Check the knife holder for damage or unusual wear.
Warning
Do not use the new cutting disc if the knife holder, fastening points,
threads, or screws are damaged. In this case, the robotic mower may only be reused after proper
inspection.
5. Installation of the CUT GUARD Cutting Disc
- Place the CUT GUARD cutting disc correctly on the knife holder.
- Ensure that the cutting disc lies flat and is correctly centered.
- Insert the appropriate fastening screws.
- Tighten the screws evenly and firmly.
- Do not overtighten the screws to avoid damage to threads or components.
- After installation, check that the cutting disc is securely attached.
- Gently turn the cutting disc by hand and check if it runs freely.
6. Installation or Replacement of Replacement Blades
- Loosen the screws of the old blades.
- Carefully remove the old blades.
- Clean the contact surfaces on the cutting disc.
- Place the new CUT GUARD replacement blades on the designated fastening points.
- Ensure that the blades remain freely movable, as intended by design.
- Secure each blade with a suitable screw.
- Tighten the screws securely without overtightening.
- Check each blade for a secure fit and free movement.
7. Post-Installation Check
- Are all screws fully inserted and securely fastened?
- Is the cutting disc lying flat and securely?
- Can the blades move freely, if intended?
- Are there no tools or foreign objects left in the area of the cutting disc?
- Does the cutting disc run freely and without grinding?
8. Operation and Maintenance
- Regularly check knives, screws, and cutting disc for wear.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the cutting disc of grass clippings and dirt.
- Do not use the robotic mower if unusual noises, vibrations, or running problems occur.
- Only use compatible spare parts and suitable mounting materials.
Note on Blade Replacement
Always replace blades in a timely manner. Dull or damaged blades can worsen the cutting quality,
put more strain on the robotic mower, and compromise safety.
9. Disclaimer
CUT GUARD cutting discs, replacement blades, and blades are accessories and spare parts for compatible robotic mowers.
They are not original accessories from the respective device manufacturer unless explicitly stated
in the product description.
The assembly and use are at your own risk. No liability is accepted for damages caused by improper assembly,
incorrect use, damaged components, or failure to observe the operating manual of the robotic mower.
Warning in Case of Injury
Seek medical assistance immediately in case of injury or accident.
GPSR Information on Product Safety
Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.
Manufacturer & Responsible Person (EU)
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email:
service@trivando.de
Website:
www.trivando.de
Product Identification
Brand: CUT GUARD
Product Type: Blade discs, replacement blades, and blades for compatible robotic mowers
Intended Use: Accessories and replacement parts for suitable robotic mowers
Product Type: Cutting and fastening components for use in robotic mowers
Item Number / Model / Variant: see respective product description, packaging, or invoice
Compatibility: see product description and operating instructions of the robotic mower
Important Warning
Sharp blades. Risk of injury. The knives and blades can cause serious cuts.
Assembly, disassembly, cleaning, and maintenance should only be performed when the robotic mower is completely turned off.
Always wear appropriate protective gloves and wait until the blade disc has come to a complete stop.
Intended Use
CUT GUARD blade discs, replacement blades, and blades are intended solely as accessories and replacement parts for compatible robotic mowers.
The products may only be used for their intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper assembly may lead to injuries, malfunctions, or property damage.
Not Suitable For
- Children.
- Persons who have not read or understood the operating instructions of the robotic mower.
- Incompatible robotic mowers.
- Devices with damaged blade mounts, damaged threads, or defective fastening points.
- Use outside the intended application area.
- Use as a tool, hand knife, or for other cutting tasks outside the robotic mower.
Safety and Warning Notices
- Use only for the intended purpose.
- Use only with compatible robotic mowers, suitable blade discs, and appropriate mounting materials.
- Always turn off the robotic mower completely before any assembly, disassembly, cleaning, or maintenance.
- If possible, remove the battery or disconnect the device from the power supply.
- Always wait until the blade disc has come to a complete stop.
- Always wear appropriate protective gloves.
- Keep hands and feet away from rotating blades.
- Never touch knives, blades, or blade discs during operation.
- Do not use damaged, bent, heavily worn, rusted, or corroded knives, screws, or blade discs.
- Regularly check knives, screws, and blade discs for secure fit, wear, and damage.
- Use only suitable screws and appropriate mounting materials.
- If provided, use screws with locking lacquer or suitable screw locking.
- Keep children, animals, and uninvolved persons away from the work area.
- The robotic mower must not be operated if persons, especially children, or animals are in the work area.
- In case of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
- In case of injuries or accidents, seek medical assistance immediately.
Assembly Instructions
Assembly may only be performed when the device is turned off. Always observe the operating instructions of the respective robotic mower.
Blade discs, replacement blades, and blades must be correctly seated and securely fastened. After assembly, check whether the blade disc runs freely and that no tools or foreign objects have been left in the area of the knives.
Check Before Operation
- Are all screws fully inserted and tightened?
- Is the blade disc correctly centered and securely fastened?
- Are the knives correctly mounted?
- Can movable knives move freely, if this is structurally intended?
- Are there no visible damages?
- Does the blade disc run freely and without grinding?
Maintenance and Inspection
- Regularly check knives, blades, screws, and blade discs for wear and damage.
- Immediately replace damaged or heavily worn parts.
- Regularly clean the blade disc of grass residues, dirt, and deposits.
- Do not use aggressive cleaning agents that may damage material or coating.
- Use only compatible replacement parts and suitable mounting materials.
Storage and Disposal
Store replacement blades, blades, screws, and blade discs dry, clean, and secure.
Keep out of reach of children and unauthorized persons.
Safely package used, damaged, or dull knives and blades to avoid cuts.
Dispose of metal parts, packaging, and accessories in accordance with local regulations.
Note on Original Accessories
CUT GUARD products are compatible accessories and replacement parts. They are not original accessories of the respective
device manufacturer unless explicitly stated in the product description. Brand names, model designations,
and manufacturer information are for compatibility indication only.
Contact for Safety Questions, Complaints, or Accidents
For questions regarding product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:
Patryk Napiorkowski - Trivando
Am bhf Weinhübel 8
02827 Görlitz
Germany
Email: service@trivando.de
Website: www.trivando.de
What happens if I buy an incompatible blade disc for my Mammotion LUBA 1 AWD?
Using an incompatible blade disc can cause imbalances that may damage the lawn mower. This often leads to an uneven cut and can even overload the motors, resulting in costly repairs.
How long does shipping take for the blade disc for my lawn mower, and is there a return option?
Shipping of the blade disc for Mammotion LUBA 1 AWD and LUBA 2 AWD usually takes 2-4 business days. If you are not satisfied, you can return the product within 14 days as long as it is unopened.
What is the difference between the 6-blade and 9-blade disc for the Mammotion LUBA?
The 6-blade disc provides a precise cut for smaller gardens, while the 9-blade variant is suitable for larger areas as it works faster and increases cutting performance. For a well-maintained lawn, we recommend the 9-blade for larger areas.
How does the new blade disc affect the cutting pattern and battery life of my Mammotion LUBA 2 AWD?
A new blade disc ensures an even cutting pattern, which supports the health of your lawn. A clean cut reduces energy consumption, allowing your lawn mower to operate more efficiently and extending battery life.
How do I change the blade disc on my Mammotion LUBA 1 AWD?
Changing the blade disc takes about 15-20 minutes. You only need a wrench to remove the old disc and attach the new blade disc. Make sure to change both discs at the same time to ensure a balanced cutting system.